Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=1392): Process ended prematurely: osmo-stp_10.42.42.5(pid=1392) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1392)]
Standard Output
---------------------------------------------- trial-2387 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 09:45:04.327564 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.339354 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:45:04.475518 tst iperf3.py: using LAC 33117 09:45:04.594732 tst iperf3.py: using RAC 222 09:45:04.711150 tst iperf3.py: using CellId 33117 09:45:04.827611 tst iperf3.py: using BVCI 33118 09:45:04.850326 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.861644 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.872722 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.883881 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.895253 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.906640 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.918186 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.929518 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:45:04.941354 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:45:05.217500 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:45:05.340414 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:45:05.645457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1384): Launched 09:45:05.899168 run iperf3-srv_10.42.42.10(pid=1385): Launched 09:45:06.078859 tst iperf3.py:8: start network... 09:45:06.201458 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:45:06.666866 run create_hlr_db(pid=1386): Launched 09:45:06.840292 bus /gobi_6: Setting Powered False 09:45:07.859891 run create_hlr_db(pid=1386): Terminated: ok {rc=0} 09:45:08.278623 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1388): Launched 09:45:08.595981 run osmo-hlr_10.42.42.2(pid=1389): Launched 09:45:08.711585 run osmo-stp_10.42.42.5: Starting osmo-stp 09:45:09.258890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1391): Launched 09:45:09.575201 run osmo-stp_10.42.42.5(pid=1392): Launched 09:45:09.689633 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:45:10.241272 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1394): Launched 09:45:10.354653 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:45:10.630602 run patchelf(pid=1395): Launched 09:45:10.815864 run osmo-stp_10.42.42.5(pid=1392): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1392)] 09:45:10.951059 run osmo-stp_10.42.42.5(pid=1392): stdout: | (launched: 2022-12-13_09:45:09.420665) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:45:11.086807 run osmo-stp_10.42.42.5(pid=1392): stderr: | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094509614 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:45:11.217821 run osmo-stp_10.42.42.5(pid=1392): stdout: | (launched: 2022-12-13_09:45:09.420665) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:45:11.348542 run osmo-stp_10.42.42.5(pid=1392): stderr: | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213094509613 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213094509614 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213094509614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:45:11.499916 run patchelf(pid=1395): Terminating (SIGINT) 09:45:11.678086 run patchelf(pid=1395): Terminated: ok {rc=0} 09:45:11.710819 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1392): Process ended prematurely: osmo-stp_10.42.42.5(pid=1392) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1392)] [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 09:45:11.720499 tst iperf3.py:8: Test FAILED (7.4 sec) 09:45:11.782995 run osmo-hlr_10.42.42.2(pid=1389): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1389)] 09:45:11.835051 run osmo-hlr_10.42.42.2(pid=1389): stdout: | (launched: 2022-12-13_09:45:08.440537) 09:45:11.887934 run osmo-hlr_10.42.42.2(pid=1389): stderr: | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213094508637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213094508649 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213094508658 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213094508658 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213094508658 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:45:11.933123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1384): Terminating (SIGTERM) 09:45:11.978560 run iperf3-srv_10.42.42.10(pid=1385): Terminating (SIGTERM) 09:45:12.023282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1388): Terminating (SIGTERM) 09:45:12.065549 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1391): Terminating (SIGTERM) 09:45:12.107843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1394): Terminating (SIGTERM) 09:45:12.117406 --- ParallelTerminationStrategy: PID 1384 died... 09:45:12.173261 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1384): Terminated: ok {rc=0} 09:45:12.183572 --- ParallelTerminationStrategy: PID 1385 died... 09:45:12.240452 run iperf3-srv_10.42.42.10(pid=1385): Terminated {rc=256} 09:45:12.251502 --- ParallelTerminationStrategy: PID 1388 died... 09:45:12.307638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1388): Terminated: ok {rc=0} 09:45:12.318232 --- ParallelTerminationStrategy: PID 1391 died... 09:45:12.375403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1391): Terminated: ok {rc=0} 09:45:12.385791 --- ParallelTerminationStrategy: PID 1394 died... 09:45:12.441771 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1394): Terminated: ok {rc=0} 09:45:12.527928 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1392): Process ended prematurely: osmo-stp_10.42.42.5(pid=1392) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1392)]