Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=27573): Process ended prematurely: osmo-stp_10.42.42.5(pid=27573) [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27573)]
Standard Output
---------------------------------------------- trial-2387 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:48:37.918703 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:37.930108 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:48:38.077618 tst cs_paging_gprs_active.py: using LAC 32814 08:48:38.202694 tst cs_paging_gprs_active.py: using RAC 174 08:48:38.322512 tst cs_paging_gprs_active.py: using CellId 32814 08:48:38.438168 tst cs_paging_gprs_active.py: using BVCI 32815 08:48:38.460851 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.471809 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.482538 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.493243 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.504376 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.515412 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.526496 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.537364 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:48:38.548312 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:48:38.663852 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:48:38.937771 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:48:39.060761 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:48:39.366392 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27563): Launched 08:48:39.619161 run iperf3-srv_10.42.42.10(pid=27564): Launched 08:48:39.799310 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:48:39.921919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:48:40.226260 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27565): Launched 08:48:40.478871 run iperf3-srv_10.42.42.10(pid=27566): Launched 08:48:40.659463 tst cs_paging_gprs_active.py:38: start network... 08:48:40.782873 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:48:41.244889 run create_hlr_db(pid=27567): Launched 08:48:41.414213 bus /gobi_6: Setting Powered False 08:48:42.436916 run create_hlr_db(pid=27567): Terminated: ok {rc=0} 08:48:42.828916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27569): Launched 08:48:43.124503 run osmo-hlr_10.42.42.2(pid=27570): Launched 08:48:43.240121 run osmo-stp_10.42.42.5: Starting osmo-stp 08:48:43.760809 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27572): Launched 08:48:44.055896 run osmo-stp_10.42.42.5(pid=27573): Launched 08:48:44.164542 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:48:44.683694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27575): Launched 08:48:44.796737 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:48:45.070331 run patchelf(pid=27576): Launched 08:48:45.254942 run osmo-stp_10.42.42.5(pid=27573): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27573)] 08:48:45.390409 run osmo-stp_10.42.42.5(pid=27573): stdout: | (launched: 2022-12-13_08:48:43.910721) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:48:45.526016 run osmo-stp_10.42.42.5(pid=27573): stderr: | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084844080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:48:45.657569 run osmo-stp_10.42.42.5(pid=27573): stdout: | (launched: 2022-12-13_08:48:43.910721) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:48:45.787730 run osmo-stp_10.42.42.5(pid=27573): stderr: | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084844080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084844080 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084844081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:48:45.943324 run patchelf(pid=27576): Terminating (SIGINT) 08:48:46.133171 run patchelf(pid=27576): Terminated: ok {rc=0} 08:48:46.165574 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27573): Process ended prematurely: osmo-stp_10.42.42.5(pid=27573) [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27573)] [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:48:46.175789 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 08:48:46.240200 run osmo-hlr_10.42.42.2(pid=27570): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27570)] 08:48:46.292829 run osmo-hlr_10.42.42.2(pid=27570): stdout: | (launched: 2022-12-13_08:48:42.979042) 08:48:46.345784 run osmo-hlr_10.42.42.2(pid=27570): stderr: | �[0;m�[1;31m20221213084843155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213084843155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213084843156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213084843156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213084843156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213084843156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213084843167 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213084843176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213084843176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213084843176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:48:46.390492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27563): Terminating (SIGTERM) 08:48:46.434443 run iperf3-srv_10.42.42.10(pid=27564): Terminating (SIGTERM) 08:48:46.477800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27565): Terminating (SIGTERM) 08:48:46.520618 run iperf3-srv_10.42.42.10(pid=27566): Terminating (SIGTERM) 08:48:46.564989 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27569): Terminating (SIGTERM) 08:48:46.607455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27572): Terminating (SIGTERM) 08:48:46.651499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27575): Terminating (SIGTERM) 08:48:46.661379 --- ParallelTerminationStrategy: PID 27563 died... 08:48:46.719736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27563): Terminated: ok {rc=0} 08:48:46.730365 --- ParallelTerminationStrategy: PID 27564 died... 08:48:46.786906 run iperf3-srv_10.42.42.10(pid=27564): Terminated {rc=256} 08:48:46.797487 --- ParallelTerminationStrategy: PID 27565 died... 08:48:46.854524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27565): Terminated: ok {rc=0} 08:48:46.864909 --- ParallelTerminationStrategy: PID 27566 died... 08:48:46.922494 run iperf3-srv_10.42.42.10(pid=27566): Terminated {rc=256} 08:48:46.932853 --- ParallelTerminationStrategy: PID 27569 died... 08:48:46.989683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27569): Terminated: ok {rc=0} 08:48:47.000462 --- ParallelTerminationStrategy: PID 27572 died... 08:48:47.057305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27572): Terminated: ok {rc=0} 08:48:47.067741 --- ParallelTerminationStrategy: PID 27575 died... 08:48:47.126327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27575): Terminated: ok {rc=0} 08:48:47.215426 bus /gobi_0: Setting Powered False 08:48:48.319690 bus /gobi_0: Setting Powered False 08:48:49.426459 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27573): Process ended prematurely: osmo-stp_10.42.42.5(pid=27573) [trial-2387↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27573)]