Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27640): Process ended prematurely: osmo-stp_10.42.42.5(pid=27640) [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27640)]
Standard Output
---------------------------------------------- trial-2387 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:49:37.058292 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.069447 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:49:37.215359 tst cs_paging_gprs_active.py: using LAC 32819 08:49:37.331621 tst cs_paging_gprs_active.py: using RAC 179 08:49:37.451950 tst cs_paging_gprs_active.py: using CellId 32819 08:49:37.566807 tst cs_paging_gprs_active.py: using BVCI 32820 08:49:37.589640 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.600347 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.611052 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.621703 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.632839 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.644111 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.655246 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.666121 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:49:37.677119 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:49:37.796698 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:49:38.069222 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:49:38.192423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:49:38.496515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27630): Launched 08:49:38.749272 run iperf3-srv_10.42.42.10(pid=27631): Launched 08:49:38.928927 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:49:39.051740 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:49:39.356726 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27632): Launched 08:49:39.608902 run iperf3-srv_10.42.42.10(pid=27633): Launched 08:49:39.788938 tst cs_paging_gprs_active.py:38: start network... 08:49:39.911705 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:49:40.374998 run create_hlr_db(pid=27634): Launched 08:49:40.545324 bus /gobi_6: Setting Powered False 08:49:41.566853 run create_hlr_db(pid=27634): Terminated: ok {rc=0} 08:49:41.985643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27636): Launched 08:49:42.302637 run osmo-hlr_10.42.42.2(pid=27637): Launched 08:49:42.418692 run osmo-stp_10.42.42.5: Starting osmo-stp 08:49:42.966619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27639): Launched 08:49:43.282281 run osmo-stp_10.42.42.5(pid=27640): Launched 08:49:43.398284 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:49:43.948754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27642): Launched 08:49:44.062005 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:49:44.336842 run patchelf(pid=27643): Launched 08:49:44.521585 run osmo-stp_10.42.42.5(pid=27640): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27640)] 08:49:44.657223 run osmo-stp_10.42.42.5(pid=27640): stdout: | (launched: 2022-12-13_08:49:43.127667) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:44.793038 run osmo-stp_10.42.42.5(pid=27640): stderr: | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084943320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:44.923714 run osmo-stp_10.42.42.5(pid=27640): stdout: | (launched: 2022-12-13_08:49:43.127667) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:45.053744 run osmo-stp_10.42.42.5(pid=27640): stderr: | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084943319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084943320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084943322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:45.204384 run patchelf(pid=27643): Terminating (SIGINT) 08:49:45.381569 run patchelf(pid=27643): Terminated: ok {rc=0} 08:49:45.414135 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27640): Process ended prematurely: osmo-stp_10.42.42.5(pid=27640) [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27640)] [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:49:45.423831 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 08:49:45.485342 run osmo-hlr_10.42.42.2(pid=27637): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27637)] 08:49:45.535782 run osmo-hlr_10.42.42.2(pid=27637): stdout: | (launched: 2022-12-13_08:49:42.146839) 08:49:45.587053 run osmo-hlr_10.42.42.2(pid=27637): stderr: | �[0;m�[1;31m20221213084942344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213084942344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213084942344 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213084942345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213084942345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213084942345 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213084942356 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213084942364 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213084942365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213084942365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:49:45.630970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27630): Terminating (SIGTERM) 08:49:45.672295 run iperf3-srv_10.42.42.10(pid=27631): Terminating (SIGTERM) 08:49:45.713849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27632): Terminating (SIGTERM) 08:49:45.755201 run iperf3-srv_10.42.42.10(pid=27633): Terminating (SIGTERM) 08:49:45.796850 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27636): Terminating (SIGTERM) 08:49:45.838430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27639): Terminating (SIGTERM) 08:49:45.879636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27642): Terminating (SIGTERM) 08:49:45.889241 --- ParallelTerminationStrategy: PID 27630 died... 08:49:45.946600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27630): Terminated: ok {rc=0} 08:49:45.959175 --- ParallelTerminationStrategy: PID 27631 died... 08:49:46.016041 run iperf3-srv_10.42.42.10(pid=27631): Terminated {rc=256} 08:49:46.026276 --- ParallelTerminationStrategy: PID 27632 died... 08:49:46.082049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27632): Terminated: ok {rc=0} 08:49:46.092325 --- ParallelTerminationStrategy: PID 27633 died... 08:49:46.147754 run iperf3-srv_10.42.42.10(pid=27633): Terminated {rc=256} 08:49:46.158101 --- ParallelTerminationStrategy: PID 27636 died... 08:49:46.214357 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27636): Terminated: ok {rc=0} 08:49:46.224655 --- ParallelTerminationStrategy: PID 27639 died... 08:49:46.280281 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27639): Terminated: ok {rc=0} 08:49:46.290682 --- ParallelTerminationStrategy: PID 27642 died... 08:49:46.346431 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27642): Terminated: ok {rc=0} 08:49:46.434078 bus /gobi_0: Setting Powered False 08:49:47.535125 bus /gobi_0: Setting Powered False 08:49:48.644715 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27640): Process ended prematurely: osmo-stp_10.42.42.5(pid=27640) [trial-2387↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27640)]