Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=27021): Process ended prematurely: osmo-stp_10.42.42.5(pid=27021) [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27021)]
Standard Output
---------------------------------------------- trial-2387 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:40:49.797620 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:49.808864 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:40:49.964760 tst cs_paging_gprs_active.py: using LAC 32772 08:40:50.097999 tst cs_paging_gprs_active.py: using RAC 132 08:40:50.234784 tst cs_paging_gprs_active.py: using CellId 32772 08:40:50.361378 tst cs_paging_gprs_active.py: using BVCI 32773 08:40:50.385780 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.397501 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.408486 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.419464 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.430810 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.442243 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.454040 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.465349 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:40:50.476850 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:40:50.601109 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:40:50.893395 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:40:51.025567 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:40:51.354884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27009): Launched 08:40:51.629256 run iperf3-srv_10.42.42.10(pid=27010): Launched 08:40:51.822565 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:40:51.965652 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:40:52.315869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27013): Launched 08:40:52.609027 run iperf3-srv_10.42.42.10(pid=27014): Launched 08:40:52.815527 tst cs_paging_gprs_active.py:38: start network... 08:40:52.956393 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:40:53.498352 run create_hlr_db(pid=27015): Launched 08:40:53.692241 bus /gobi_6: Setting Powered False 08:40:54.714939 run create_hlr_db(pid=27015): Terminated: ok {rc=0} 08:40:55.141537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27017): Launched 08:40:55.461590 run osmo-hlr_10.42.42.2(pid=27018): Launched 08:40:55.582703 run osmo-stp_10.42.42.5: Starting osmo-stp 08:40:56.137848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27020): Launched 08:40:56.456731 run osmo-stp_10.42.42.5(pid=27021): Launched 08:40:56.572251 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:40:57.124037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27023): Launched 08:40:57.236580 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:40:57.513793 run patchelf(pid=27024): Launched 08:40:57.698124 run osmo-stp_10.42.42.5(pid=27021): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27021)] 08:40:57.833094 run osmo-stp_10.42.42.5(pid=27021): stdout: | (launched: 2022-12-13_08:40:56.297830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:57.967826 run osmo-stp_10.42.42.5(pid=27021): stderr: | �[0;m�[38;5;43m20221213084056472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084056473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084056473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084056473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084056475 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084056476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084056476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:58.098558 run osmo-stp_10.42.42.5(pid=27021): stdout: | (launched: 2022-12-13_08:40:56.297830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:58.227504 run osmo-stp_10.42.42.5(pid=27021): stderr: | �[0;m�[38;5;43m20221213084056472 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084056473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084056473 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084056473 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084056475 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084056476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084056476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:58.378151 run patchelf(pid=27024): Terminating (SIGINT) 08:40:58.555359 run patchelf(pid=27024): Terminated: ok {rc=0} 08:40:58.587724 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27021): Process ended prematurely: osmo-stp_10.42.42.5(pid=27021) [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27021)] [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:40:58.597066 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:40:58.658560 run osmo-hlr_10.42.42.2(pid=27018): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27018)] 08:40:58.708297 run osmo-hlr_10.42.42.2(pid=27018): stdout: | (launched: 2022-12-13_08:40:55.302512) 08:40:58.758643 run osmo-hlr_10.42.42.2(pid=27018): stderr: | �[0;m�[1;31m20221213084055484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213084055485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213084055485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213084055485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213084055485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213084055485 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213084055497 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213084055505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213084055505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213084055505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:40:58.801504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27009): Terminating (SIGTERM) 08:40:58.841852 run iperf3-srv_10.42.42.10(pid=27010): Terminating (SIGTERM) 08:40:58.882284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27013): Terminating (SIGTERM) 08:40:58.922603 run iperf3-srv_10.42.42.10(pid=27014): Terminating (SIGTERM) 08:40:58.963255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27017): Terminating (SIGTERM) 08:40:59.003571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27020): Terminating (SIGTERM) 08:40:59.043891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27023): Terminating (SIGTERM) 08:40:59.053261 --- ParallelTerminationStrategy: PID 27009 died... 08:40:59.107709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27009): Terminated: ok {rc=0} 08:40:59.117460 --- ParallelTerminationStrategy: PID 27010 died... 08:40:59.171186 run iperf3-srv_10.42.42.10(pid=27010): Terminated {rc=256} 08:40:59.180729 --- ParallelTerminationStrategy: PID 27013 died... 08:40:59.234592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27013): Terminated: ok {rc=0} 08:40:59.244105 --- ParallelTerminationStrategy: PID 27014 died... 08:40:59.297813 run iperf3-srv_10.42.42.10(pid=27014): Terminated {rc=256} 08:40:59.307479 --- ParallelTerminationStrategy: PID 27017 died... 08:40:59.361282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27017): Terminated: ok {rc=0} 08:40:59.370888 --- ParallelTerminationStrategy: PID 27020 died... 08:40:59.424623 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27020): Terminated: ok {rc=0} 08:40:59.434231 --- ParallelTerminationStrategy: PID 27023 died... 08:40:59.488236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27023): Terminated: ok {rc=0} 08:40:59.577478 bus /gobi_0: Setting Powered False 08:41:00.681518 bus /gobi_0: Setting Powered False 08:41:01.790852 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27021): Process ended prematurely: osmo-stp_10.42.42.5(pid=27021) [trial-2387↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27021)]