Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26949): Process ended prematurely: osmo-stp_10.42.42.5(pid=26949) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26949)]
Standard Output
---------------------------------------------- trial-2387 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:39:49.033963 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.045343 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:39:49.180715 tst cs_paging_gprs_active.py: using LAC 32767 08:39:49.313546 tst cs_paging_gprs_active.py: using RAC 127 08:39:49.445625 tst cs_paging_gprs_active.py: using CellId 32767 08:39:49.579270 tst cs_paging_gprs_active.py: using BVCI 32768 08:39:49.605116 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.616431 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.627622 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.638866 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.650166 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.661403 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.672720 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.683795 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:39:49.695451 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:39:49.816153 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:39:50.105640 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:39:50.238759 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:39:50.569810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26939): Launched 08:39:50.844591 run iperf3-srv_10.42.42.10(pid=26940): Launched 08:39:51.037595 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:39:51.169697 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:39:51.499558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26941): Launched 08:39:51.773245 run iperf3-srv_10.42.42.10(pid=26942): Launched 08:39:51.966471 tst cs_paging_gprs_active.py:38: start network... 08:39:52.098398 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:39:52.599409 run create_hlr_db(pid=26943): Launched 08:39:52.781246 bus /gobi_6: Setting Powered False 08:39:53.802829 run create_hlr_db(pid=26943): Terminated: ok {rc=0} 08:39:54.224939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26945): Launched 08:39:54.545358 run osmo-hlr_10.42.42.2(pid=26946): Launched 08:39:54.670037 run osmo-stp_10.42.42.5: Starting osmo-stp 08:39:55.228685 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26948): Launched 08:39:55.547406 run osmo-stp_10.42.42.5(pid=26949): Launched 08:39:55.663358 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:39:56.215150 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26951): Launched 08:39:56.327981 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:39:56.606480 run patchelf(pid=26952): Launched 08:39:56.790460 run osmo-stp_10.42.42.5(pid=26949): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26949)] 08:39:56.924879 run osmo-stp_10.42.42.5(pid=26949): stdout: | (launched: 2022-12-13_08:39:55.389419) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:39:57.059736 run osmo-stp_10.42.42.5(pid=26949): stderr: | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213083955567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:39:57.190334 run osmo-stp_10.42.42.5(pid=26949): stdout: | (launched: 2022-12-13_08:39:55.389419) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:39:57.319655 run osmo-stp_10.42.42.5(pid=26949): stderr: | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213083955566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213083955567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213083955567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:39:57.470446 run patchelf(pid=26952): Terminating (SIGINT) 08:39:57.647989 run patchelf(pid=26952): Terminated: ok {rc=0} 08:39:57.680120 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26949): Process ended prematurely: osmo-stp_10.42.42.5(pid=26949) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26949)] [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:39:57.689443 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:39:57.750457 run osmo-hlr_10.42.42.2(pid=26946): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26946)] 08:39:57.800093 run osmo-hlr_10.42.42.2(pid=26946): stdout: | (launched: 2022-12-13_08:39:54.385584) 08:39:57.850506 run osmo-hlr_10.42.42.2(pid=26946): stderr: | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213083954568 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213083954579 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213083954588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213083954588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213083954588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:39:57.893349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26939): Terminating (SIGTERM) 08:39:57.933509 run iperf3-srv_10.42.42.10(pid=26940): Terminating (SIGTERM) 08:39:57.973811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26941): Terminating (SIGTERM) 08:39:58.014066 run iperf3-srv_10.42.42.10(pid=26942): Terminating (SIGTERM) 08:39:58.054476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26945): Terminating (SIGTERM) 08:39:58.094786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26948): Terminating (SIGTERM) 08:39:58.135327 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26951): Terminating (SIGTERM) 08:39:58.144615 --- ParallelTerminationStrategy: PID 26939 died... 08:39:58.199085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26939): Terminated: ok {rc=0} 08:39:58.208646 --- ParallelTerminationStrategy: PID 26940 died... 08:39:58.262631 run iperf3-srv_10.42.42.10(pid=26940): Terminated {rc=256} 08:39:58.272139 --- ParallelTerminationStrategy: PID 26941 died... 08:39:58.325922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26941): Terminated: ok {rc=0} 08:39:58.335444 --- ParallelTerminationStrategy: PID 26942 died... 08:39:58.389086 run iperf3-srv_10.42.42.10(pid=26942): Terminated {rc=256} 08:39:58.398577 --- ParallelTerminationStrategy: PID 26945 died... 08:39:58.452354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26945): Terminated: ok {rc=0} 08:39:58.461954 --- ParallelTerminationStrategy: PID 26948 died... 08:39:58.516563 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26948): Terminated: ok {rc=0} 08:39:58.526246 --- ParallelTerminationStrategy: PID 26951 died... 08:39:58.580201 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26951): Terminated: ok {rc=0} 08:39:58.665087 bus /gobi_0: Setting Powered False 08:39:59.765263 bus /gobi_0: Setting Powered False 08:40:00.873023 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26949): Process ended prematurely: osmo-stp_10.42.42.5(pid=26949) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26949)]