Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28966): Process ended prematurely: osmo-stp_10.42.42.5(pid=28966) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28966)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 08:57:00.607248 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:00.618700 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:57:00.762326 tst ping_idle_ping.py: using LAC 32859 08:57:00.886107 tst ping_idle_ping.py: using RAC 219 08:57:01.043616 tst ping_idle_ping.py: using CellId 32859 08:57:01.199699 tst ping_idle_ping.py: using BVCI 32860 08:57:01.231472 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.244368 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.259736 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.275881 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.292190 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.307996 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.322369 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:57:01.335506 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:57:01.680056 tst ping_idle_ping.py:24: start network... 08:57:01.816934 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:57:02.366330 run create_hlr_db(pid=28960): Launched 08:57:02.549948 bus /gobi_6: Setting Powered False 08:57:03.569274 run create_hlr_db(pid=28960): Terminated: ok {rc=0} 08:57:03.963344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28962): Launched 08:57:04.255795 run osmo-hlr_10.42.42.2(pid=28963): Launched 08:57:04.371893 run osmo-stp_10.42.42.5: Starting osmo-stp 08:57:04.886187 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28965): Launched 08:57:05.179510 run osmo-stp_10.42.42.5(pid=28966): Launched 08:57:05.287533 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:57:05.798694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28968): Launched 08:57:05.903350 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:57:06.158744 run patchelf(pid=28969): Launched 08:57:06.331073 run osmo-stp_10.42.42.5(pid=28966): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28966)] 08:57:06.456883 run osmo-stp_10.42.42.5(pid=28966): stdout: | (launched: 2022-12-13_08:57:05.035133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:06.583310 run osmo-stp_10.42.42.5(pid=28966): stderr: | �[0;m�[38;5;43m20221213085705206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085705207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085705207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085705207 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:06.704930 run osmo-stp_10.42.42.5(pid=28966): stdout: | (launched: 2022-12-13_08:57:05.035133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:06.826129 run osmo-stp_10.42.42.5(pid=28966): stderr: | �[0;m�[38;5;43m20221213085705206 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085705207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085705207 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085705207 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085705208 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:06.966625 run patchelf(pid=28969): Terminating (SIGINT) 08:57:07.131389 run patchelf(pid=28969): Terminated: ok {rc=0} 08:57:07.161453 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28966): Process ended prematurely: osmo-stp_10.42.42.5(pid=28966) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28966)] [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 08:57:07.170103 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 08:57:07.230835 run osmo-hlr_10.42.42.2(pid=28963): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28963)] 08:57:07.280209 run osmo-hlr_10.42.42.2(pid=28963): stdout: | (launched: 2022-12-13_08:57:04.111929) 08:57:07.330134 run osmo-hlr_10.42.42.2(pid=28963): stderr: | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085704285 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085704297 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085704306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085704306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085704306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:57:07.372539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28962): Terminating (SIGTERM) 08:57:07.412559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28965): Terminating (SIGTERM) 08:57:07.452487 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28968): Terminating (SIGTERM) 08:57:07.461802 --- ParallelTerminationStrategy: PID 28962 died... 08:57:07.515724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28962): Terminated: ok {rc=0} 08:57:07.525484 --- ParallelTerminationStrategy: PID 28965 died... 08:57:07.578990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28965): Terminated: ok {rc=0} 08:57:07.588481 --- ParallelTerminationStrategy: PID 28968 died... 08:57:07.641854 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28968): Terminated: ok {rc=0} 08:57:07.730108 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28966): Process ended prematurely: osmo-stp_10.42.42.5(pid=28966) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28966)]