Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=30475): Process ended prematurely: osmo-stp_10.42.42.5(pid=30475) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30475)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 09:14:06.422340 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:06.433617 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:14:06.590408 tst cs_paging_gprs_active.py: using LAC 32951 09:14:06.714093 tst cs_paging_gprs_active.py: using RAC 56 09:14:06.840323 tst cs_paging_gprs_active.py: using CellId 32951 09:14:06.966051 tst cs_paging_gprs_active.py: using BVCI 32952 09:14:06.990639 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.001984 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.013224 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.024394 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.035458 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.046620 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.057838 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.068872 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:14:07.080134 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:14:07.198264 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:14:07.490148 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:14:07.624147 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:14:07.952714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30465): Launched 09:14:08.211060 run iperf3-srv_10.42.42.10(pid=30466): Launched 09:14:08.394622 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:14:08.519662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:14:08.828596 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30467): Launched 09:14:09.084715 run iperf3-srv_10.42.42.10(pid=30468): Launched 09:14:09.267071 tst cs_paging_gprs_active.py:38: start network... 09:14:09.392007 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:14:09.862488 run create_hlr_db(pid=30469): Launched 09:14:10.034254 bus /gobi_6: Setting Powered False 09:14:11.056433 run create_hlr_db(pid=30469): Terminated: ok {rc=0} 09:14:11.453052 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30471): Launched 09:14:11.753535 run osmo-hlr_10.42.42.2(pid=30472): Launched 09:14:11.863713 run osmo-stp_10.42.42.5: Starting osmo-stp 09:14:12.381595 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30474): Launched 09:14:12.681628 run osmo-stp_10.42.42.5(pid=30475): Launched 09:14:12.791487 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:14:13.311356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30477): Launched 09:14:13.418385 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:14:13.685677 run patchelf(pid=30478): Launched 09:14:13.862231 run osmo-stp_10.42.42.5(pid=30475): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30475)] 09:14:13.991215 run osmo-stp_10.42.42.5(pid=30475): stdout: | (launched: 2022-12-13_09:14:12.533560) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:14:14.120361 run osmo-stp_10.42.42.5(pid=30475): stderr: | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091412706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:14:14.245181 run osmo-stp_10.42.42.5(pid=30475): stdout: | (launched: 2022-12-13_09:14:12.533560) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:14:14.368813 run osmo-stp_10.42.42.5(pid=30475): stderr: | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091412705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091412706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091412706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:14:14.512472 run patchelf(pid=30478): Terminating (SIGINT) 09:14:14.681512 run patchelf(pid=30478): Terminated: ok {rc=0} 09:14:14.712469 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30475): Process ended prematurely: osmo-stp_10.42.42.5(pid=30475) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30475)] [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 09:14:14.721673 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 09:14:14.781438 run osmo-hlr_10.42.42.2(pid=30472): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30472)] 09:14:14.830472 run osmo-hlr_10.42.42.2(pid=30472): stdout: | (launched: 2022-12-13_09:14:11.604789) 09:14:14.879814 run osmo-hlr_10.42.42.2(pid=30472): stderr: | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213091411780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213091411792 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213091411801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213091411802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213091411802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:14:14.921937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30465): Terminating (SIGTERM) 09:14:14.961512 run iperf3-srv_10.42.42.10(pid=30466): Terminating (SIGTERM) 09:14:15.001241 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30467): Terminating (SIGTERM) 09:14:15.040688 run iperf3-srv_10.42.42.10(pid=30468): Terminating (SIGTERM) 09:14:15.080278 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30471): Terminating (SIGTERM) 09:14:15.120080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30474): Terminating (SIGTERM) 09:14:15.159709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30477): Terminating (SIGTERM) 09:14:15.168929 --- ParallelTerminationStrategy: PID 30465 died... 09:14:15.222288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30465): Terminated: ok {rc=0} 09:14:15.231868 --- ParallelTerminationStrategy: PID 30466 died... 09:14:15.284873 run iperf3-srv_10.42.42.10(pid=30466): Terminated {rc=256} 09:14:15.294398 --- ParallelTerminationStrategy: PID 30467 died... 09:14:15.347620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30467): Terminated: ok {rc=0} 09:14:15.357199 --- ParallelTerminationStrategy: PID 30468 died... 09:14:15.410186 run iperf3-srv_10.42.42.10(pid=30468): Terminated {rc=256} 09:14:15.419758 --- ParallelTerminationStrategy: PID 30471 died... 09:14:15.473126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30471): Terminated: ok {rc=0} 09:14:15.482708 --- ParallelTerminationStrategy: PID 30474 died... 09:14:15.535822 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30474): Terminated: ok {rc=0} 09:14:15.545830 --- ParallelTerminationStrategy: PID 30477 died... 09:14:15.598704 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30477): Terminated: ok {rc=0} 09:14:15.681100 bus /gobi_0: Setting Powered False 09:14:16.783388 bus /gobi_0: Setting Powered False 09:14:17.889940 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30475): Process ended prematurely: osmo-stp_10.42.42.5(pid=30475) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30475)]