Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30546): Process ended prematurely: osmo-stp_10.42.42.5(pid=30546) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30546)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 09:15:04.742939 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:04.754409 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 09:15:04.917677 tst cs_paging_gprs_active.py: using LAC 32956 09:15:05.040048 tst cs_paging_gprs_active.py: using RAC 61 09:15:05.162863 tst cs_paging_gprs_active.py: using CellId 32956 09:15:05.286590 tst cs_paging_gprs_active.py: using BVCI 32957 09:15:05.310764 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.322123 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.333257 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.344336 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.355946 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.367557 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.379719 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.391463 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:15:05.403306 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:15:05.520897 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:15:05.797811 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:15:05.921446 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:15:06.226700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30536): Launched 09:15:06.481255 run iperf3-srv_10.42.42.10(pid=30537): Launched 09:15:06.661253 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:15:06.784042 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:15:07.089392 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30538): Launched 09:15:07.343300 run iperf3-srv_10.42.42.10(pid=30539): Launched 09:15:07.523701 tst cs_paging_gprs_active.py:38: start network... 09:15:07.646794 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:15:08.113344 run create_hlr_db(pid=30540): Launched 09:15:08.283913 bus /gobi_6: Setting Powered False 09:15:09.306247 run create_hlr_db(pid=30540): Terminated: ok {rc=0} 09:15:09.724541 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30542): Launched 09:15:10.020223 run osmo-hlr_10.42.42.2(pid=30543): Launched 09:15:10.135228 run osmo-stp_10.42.42.5: Starting osmo-stp 09:15:10.652006 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30545): Launched 09:15:10.945399 run osmo-stp_10.42.42.5(pid=30546): Launched 09:15:11.052405 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:15:11.563147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30548): Launched 09:15:11.668496 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:15:11.926507 run patchelf(pid=30549): Launched 09:15:12.098896 run osmo-stp_10.42.42.5(pid=30546): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30546)] 09:15:12.225415 run osmo-stp_10.42.42.5(pid=30546): stdout: | (launched: 2022-12-13_09:15:10.801138) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:15:12.352644 run osmo-stp_10.42.42.5(pid=30546): stderr: | �[0;m�[38;5;43m20221213091510970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091510971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091510971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091510971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:15:12.475378 run osmo-stp_10.42.42.5(pid=30546): stdout: | (launched: 2022-12-13_09:15:10.801138) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:15:12.596514 run osmo-stp_10.42.42.5(pid=30546): stderr: | �[0;m�[38;5;43m20221213091510970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213091510971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213091510971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213091510971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213091510972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:15:12.737890 run patchelf(pid=30549): Terminating (SIGINT) 09:15:12.903637 run patchelf(pid=30549): Terminated: ok {rc=0} 09:15:12.934253 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30546): Process ended prematurely: osmo-stp_10.42.42.5(pid=30546) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30546)] [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 09:15:12.943411 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 09:15:13.003358 run osmo-hlr_10.42.42.2(pid=30543): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30543)] 09:15:13.052386 run osmo-hlr_10.42.42.2(pid=30543): stdout: | (launched: 2022-12-13_09:15:09.874972) 09:15:13.101879 run osmo-hlr_10.42.42.2(pid=30543): stderr: | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213091510051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213091510064 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213091510072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213091510072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213091510072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:15:13.143790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30536): Terminating (SIGTERM) 09:15:13.183325 run iperf3-srv_10.42.42.10(pid=30537): Terminating (SIGTERM) 09:15:13.222881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30538): Terminating (SIGTERM) 09:15:13.262426 run iperf3-srv_10.42.42.10(pid=30539): Terminating (SIGTERM) 09:15:13.301944 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30542): Terminating (SIGTERM) 09:15:13.341499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30545): Terminating (SIGTERM) 09:15:13.381457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30548): Terminating (SIGTERM) 09:15:13.390550 --- ParallelTerminationStrategy: PID 30536 died... 09:15:13.443988 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30536): Terminated: ok {rc=0} 09:15:13.453525 --- ParallelTerminationStrategy: PID 30537 died... 09:15:13.506518 run iperf3-srv_10.42.42.10(pid=30537): Terminated {rc=256} 09:15:13.516000 --- ParallelTerminationStrategy: PID 30538 died... 09:15:13.569046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30538): Terminated: ok {rc=0} 09:15:13.578455 --- ParallelTerminationStrategy: PID 30539 died... 09:15:13.631151 run iperf3-srv_10.42.42.10(pid=30539): Terminated {rc=256} 09:15:13.640557 --- ParallelTerminationStrategy: PID 30542 died... 09:15:13.693394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30542): Terminated: ok {rc=0} 09:15:13.702792 --- ParallelTerminationStrategy: PID 30545 died... 09:15:13.755620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30545): Terminated: ok {rc=0} 09:15:13.765115 --- ParallelTerminationStrategy: PID 30548 died... 09:15:13.818199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30548): Terminated: ok {rc=0} 09:15:13.906119 bus /gobi_0: Setting Powered False 09:15:15.007691 bus /gobi_0: Setting Powered False 09:15:16.113798 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30546): Process ended prematurely: osmo-stp_10.42.42.5(pid=30546) [trial-2387↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30546)]