Failed
dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=12810): Process ended prematurely: osmo-stp_10.42.42.5(pid=12810) [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12810)]
Standard Output
---------------------------------------------- trial-2388 dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 11:11:54.291975 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.303540 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 11:11:54.449556 tst switch_tch_pdch.py: using LAC 33544 11:11:54.564289 tst switch_tch_pdch.py: using RAC 139 11:11:54.679525 tst switch_tch_pdch.py: using CellId 33544 11:11:54.794140 tst switch_tch_pdch.py: using BVCI 33545 11:11:54.816291 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.827813 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.839552 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.850989 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.863016 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.874917 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.887017 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:11:54.899049 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 11:11:55.012728 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 11:11:55.299772 tst switch_tch_pdch.py:51: start network... 11:11:55.430856 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:11:55.923849 run create_hlr_db(pid=12804): Launched 11:11:56.105992 bus /gobi_6: Setting Powered False 11:11:57.127214 run create_hlr_db(pid=12804): Terminated: ok {rc=0} 11:11:57.527398 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12806): Launched 11:11:57.841195 run osmo-hlr_10.42.42.2(pid=12807): Launched 11:11:57.958109 run osmo-stp_10.42.42.5: Starting osmo-stp 11:11:58.501320 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12809): Launched 11:11:58.814646 run osmo-stp_10.42.42.5(pid=12810): Launched 11:11:58.929315 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:11:59.474618 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12812): Launched 11:11:59.586745 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:11:59.859883 run patchelf(pid=12813): Launched 11:12:00.044130 run osmo-stp_10.42.42.5(pid=12810): ERR: Terminated: ERROR {rc=1} [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12810)] 11:12:00.178509 run osmo-stp_10.42.42.5(pid=12810): stdout: | (launched: 2022-12-13_11:11:58.660186) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:12:00.313460 run osmo-stp_10.42.42.5(pid=12810): stderr: | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111158852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:12:00.443326 run osmo-stp_10.42.42.5(pid=12810): stdout: | (launched: 2022-12-13_11:11:58.660186) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:12:00.572435 run osmo-stp_10.42.42.5(pid=12810): stderr: | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111158852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111158852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111158853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:12:00.722645 run patchelf(pid=12813): Terminating (SIGINT) 11:12:00.912237 run patchelf(pid=12813): Terminated: ok {rc=0} 11:12:00.947054 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=12810): Process ended prematurely: osmo-stp_10.42.42.5(pid=12810) [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12810)] [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 11:12:00.957655 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 11:12:01.023877 run osmo-hlr_10.42.42.2(pid=12807): ERR: Terminated: ERROR {rc=237} [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12807)] 11:12:01.076325 run osmo-hlr_10.42.42.2(pid=12807): stdout: | (launched: 2022-12-13_11:11:57.686588) 11:12:01.129639 run osmo-hlr_10.42.42.2(pid=12807): stderr: | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213111157883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213111157895 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213111157904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213111157904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213111157904 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:12:01.175354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12806): Terminating (SIGTERM) 11:12:01.219357 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12809): Terminating (SIGTERM) 11:12:01.266003 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12812): Terminating (SIGTERM) 11:12:01.276467 --- ParallelTerminationStrategy: PID 12806 died... 11:12:01.334757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12806): Terminated: ok {rc=0} 11:12:01.345698 --- ParallelTerminationStrategy: PID 12809 died... 11:12:01.403311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12809): Terminated: ok {rc=0} 11:12:01.414331 --- ParallelTerminationStrategy: PID 12812 died... 11:12:01.472145 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12812): Terminated: ok {rc=0} 11:12:01.559255 bus /gobi_0: Setting Powered False 11:12:02.660661 bus /gobi_0: Setting Powered False 11:12:03.766218 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12810): Process ended prematurely: osmo-stp_10.42.42.5(pid=12810) [trial-2388↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12810)]