Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=8025): Process ended prematurely: osmo-stp_10.42.42.5(pid=8025) [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8025)]
Standard Output
---------------------------------------------- trial-2388 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 10:18:53.294857 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.306295 tst gprs:oc2g: Using 1 x bts (candidates: 1) 10:18:53.440379 tst cs_paging_gprs_active.py: using LAC 33265 10:18:53.572212 tst cs_paging_gprs_active.py: using RAC 115 10:18:53.705841 tst cs_paging_gprs_active.py: using CellId 33265 10:18:53.839343 tst cs_paging_gprs_active.py: using BVCI 33266 10:18:53.865277 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.876197 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.887066 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.897976 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.909148 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.920324 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.931751 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.943061 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:18:53.954537 tst gprs:oc2g: Using 1 x modem (candidates: 4) 10:18:54.074846 tst gprs:oc2g: Using 1 x modem (candidates: 4) 10:18:54.381681 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:18:54.524176 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:18:54.876431 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8015): Launched 10:18:55.172355 run iperf3-srv_10.42.42.10(pid=8016): Launched 10:18:55.381130 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:18:55.522847 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:18:55.873509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Launched 10:18:56.165571 run iperf3-srv_10.42.42.10(pid=8018): Launched 10:18:56.374218 tst cs_paging_gprs_active.py:38: start network... 10:18:56.516198 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:18:57.050504 run create_hlr_db(pid=8019): Launched 10:18:57.245745 bus /sierra_2: Setting Powered False 10:18:58.267616 run create_hlr_db(pid=8019): Terminated: ok {rc=0} 10:18:58.692350 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8021): Launched 10:18:59.009407 run osmo-hlr_10.42.42.2(pid=8022): Launched 10:18:59.124673 run osmo-stp_10.42.42.5: Starting osmo-stp 10:18:59.670235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8024): Launched 10:18:59.985432 run osmo-stp_10.42.42.5(pid=8025): Launched 10:19:00.098591 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:19:00.646944 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8027): Launched 10:19:00.759604 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:19:01.081245 run patchelf(pid=8028): Launched 10:19:01.268331 run osmo-stp_10.42.42.5(pid=8025): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8025)] 10:19:01.405079 run osmo-stp_10.42.42.5(pid=8025): stdout: | (launched: 2022-12-13_10:18:59.829278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:01.541684 run osmo-stp_10.42.42.5(pid=8025): stderr: | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101900003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:01.674211 run osmo-stp_10.42.42.5(pid=8025): stdout: | (launched: 2022-12-13_10:18:59.829278) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:19:01.805478 run osmo-stp_10.42.42.5(pid=8025): stderr: | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101900002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101900003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101900003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:19:01.959941 run patchelf(pid=8028): Terminating (SIGINT) 10:19:02.140878 run patchelf(pid=8028): Terminated: ok {rc=0} 10:19:02.174520 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8025): Process ended prematurely: osmo-stp_10.42.42.5(pid=8025) [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8025)] [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py:38] 10:19:02.184790 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 10:19:02.247137 run osmo-hlr_10.42.42.2(pid=8022): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8022)] 10:19:02.297962 run osmo-hlr_10.42.42.2(pid=8022): stdout: | (launched: 2022-12-13_10:18:58.851804) 10:19:02.349130 run osmo-hlr_10.42.42.2(pid=8022): stderr: | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213101859030 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213101859043 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213101859052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213101859053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213101859053 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:19:02.392128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8015): Terminating (SIGTERM) 10:19:02.432695 run iperf3-srv_10.42.42.10(pid=8016): Terminating (SIGTERM) 10:19:02.473398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Terminating (SIGTERM) 10:19:02.513877 run iperf3-srv_10.42.42.10(pid=8018): Terminating (SIGTERM) 10:19:02.556482 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8021): Terminating (SIGTERM) 10:19:02.596562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8024): Terminating (SIGTERM) 10:19:02.636847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8027): Terminating (SIGTERM) 10:19:02.646332 --- ParallelTerminationStrategy: PID 8015 died... 10:19:02.700878 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8015): Terminated: ok {rc=0} 10:19:02.710812 --- ParallelTerminationStrategy: PID 8016 died... 10:19:02.764507 run iperf3-srv_10.42.42.10(pid=8016): Terminated {rc=256} 10:19:02.774234 --- ParallelTerminationStrategy: PID 8017 died... 10:19:02.827588 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8017): Terminated: ok {rc=0} 10:19:02.837465 --- ParallelTerminationStrategy: PID 8018 died... 10:19:02.890786 run iperf3-srv_10.42.42.10(pid=8018): Terminated {rc=256} 10:19:02.900309 --- ParallelTerminationStrategy: PID 8021 died... 10:19:02.953795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8021): Terminated: ok {rc=0} 10:19:02.963589 --- ParallelTerminationStrategy: PID 8024 died... 10:19:03.016889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8024): Terminated: ok {rc=0} 10:19:03.026727 --- ParallelTerminationStrategy: PID 8027 died... 10:19:03.080344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8027): Terminated: ok {rc=0} 10:19:03.169719 bus /gobi_0: Setting Powered False 10:19:04.274286 bus /gobi_0: Setting Powered False 10:19:05.382370 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8025): Process ended prematurely: osmo-stp_10.42.42.5(pid=8025) [trial-2388↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8025)]