Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9040): Process ended prematurely: osmo-stp_10.42.42.5(pid=9040) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9040)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:29:41.934386 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:41.945731 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:29:42.113686 tst cs_paging_gprs_active.py: using LAC 33321 10:29:42.246275 tst cs_paging_gprs_active.py: using RAC 171 10:29:42.376149 tst cs_paging_gprs_active.py: using CellId 33321 10:29:42.507043 tst cs_paging_gprs_active.py: using BVCI 33322 10:29:42.532574 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.543955 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.555266 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.566492 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.578205 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.589730 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.601350 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.612692 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:29:42.624254 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:29:42.744276 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:29:43.048400 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:29:43.189019 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:29:43.538210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9029): Launched 10:29:43.827589 run iperf3-srv_10.42.42.10(pid=9030): Launched 10:29:44.032874 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:29:44.172671 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:29:44.521750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9031): Launched 10:29:44.812664 run iperf3-srv_10.42.42.10(pid=9032): Launched 10:29:45.018126 tst cs_paging_gprs_active.py:38: start network... 10:29:45.158392 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:29:45.688455 run create_hlr_db(pid=9033): Launched 10:29:45.896286 bus /gobi_6: Setting Powered False 10:29:46.908120 run create_hlr_db(pid=9033): Terminated: ok {rc=0} 10:29:47.368470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9036): Launched 10:29:47.683638 run osmo-hlr_10.42.42.2(pid=9037): Launched 10:29:47.807857 run osmo-stp_10.42.42.5: Starting osmo-stp 10:29:48.356770 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9039): Launched 10:29:48.672303 run osmo-stp_10.42.42.5(pid=9040): Launched 10:29:48.785724 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:29:49.332550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9042): Launched 10:29:49.443703 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:29:49.717608 run patchelf(pid=9043): Launched 10:29:49.900941 run osmo-stp_10.42.42.5(pid=9040): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9040)] 10:29:50.033927 run osmo-stp_10.42.42.5(pid=9040): stdout: | (launched: 2022-12-13_10:29:48.515254) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:29:50.166947 run osmo-stp_10.42.42.5(pid=9040): stderr: | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102948688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102948688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102948689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102948689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:29:50.295673 run osmo-stp_10.42.42.5(pid=9040): stdout: | (launched: 2022-12-13_10:29:48.515254) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:29:50.422910 run osmo-stp_10.42.42.5(pid=9040): stderr: | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102948687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102948688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102948688 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102948689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102948689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:29:50.572577 run patchelf(pid=9043): Terminating (SIGINT) 10:29:50.748207 run patchelf(pid=9043): Terminated: ok {rc=0} 10:29:50.780493 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9040): Process ended prematurely: osmo-stp_10.42.42.5(pid=9040) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9040)] [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:29:50.789714 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 10:29:50.850190 run osmo-hlr_10.42.42.2(pid=9037): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9037)] 10:29:50.899855 run osmo-hlr_10.42.42.2(pid=9037): stdout: | (launched: 2022-12-13_10:29:47.527414) 10:29:50.949731 run osmo-hlr_10.42.42.2(pid=9037): stderr: | �[0;m�[1;31m20221213102947704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102947704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102947704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102947704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102947704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102947705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102947717 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102947726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102947726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102947726 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:29:50.992447 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9029): Terminating (SIGTERM) 10:29:51.032881 run iperf3-srv_10.42.42.10(pid=9030): Terminating (SIGTERM) 10:29:51.073932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9031): Terminating (SIGTERM) 10:29:51.114765 run iperf3-srv_10.42.42.10(pid=9032): Terminating (SIGTERM) 10:29:51.154815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9036): Terminating (SIGTERM) 10:29:51.194895 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9039): Terminating (SIGTERM) 10:29:51.234983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9042): Terminating (SIGTERM) 10:29:51.244308 --- ParallelTerminationStrategy: PID 9029 died... 10:29:51.298318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9029): Terminated: ok {rc=0} 10:29:51.308124 --- ParallelTerminationStrategy: PID 9030 died... 10:29:51.361391 run iperf3-srv_10.42.42.10(pid=9030): Terminated {rc=256} 10:29:51.370882 --- ParallelTerminationStrategy: PID 9031 died... 10:29:51.423906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9031): Terminated: ok {rc=0} 10:29:51.433615 --- ParallelTerminationStrategy: PID 9032 died... 10:29:51.486615 run iperf3-srv_10.42.42.10(pid=9032): Terminated {rc=256} 10:29:51.496205 --- ParallelTerminationStrategy: PID 9036 died... 10:29:51.549522 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9036): Terminated: ok {rc=0} 10:29:51.559131 --- ParallelTerminationStrategy: PID 9039 died... 10:29:51.612631 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9039): Terminated: ok {rc=0} 10:29:51.622320 --- ParallelTerminationStrategy: PID 9042 died... 10:29:51.675773 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9042): Terminated: ok {rc=0} 10:29:51.765680 bus /gobi_0: Setting Powered False 10:29:52.870807 bus /gobi_0: Setting Powered False 10:29:53.982822 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9040): Process ended prematurely: osmo-stp_10.42.42.5(pid=9040) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9040)]