Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9112): Process ended prematurely: osmo-stp_10.42.42.5(pid=9112) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9112)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:30:42.920277 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:42.931397 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:30:43.092206 tst cs_paging_gprs_active.py: using LAC 33326 10:30:43.214253 tst cs_paging_gprs_active.py: using RAC 176 10:30:43.338586 tst cs_paging_gprs_active.py: using CellId 33326 10:30:43.463103 tst cs_paging_gprs_active.py: using BVCI 33327 10:30:43.487066 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.498010 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.508706 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.519444 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.530131 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.540889 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.551692 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.562325 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:30:43.573140 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:30:43.697309 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:30:43.985866 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:30:44.116229 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:30:44.444344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9102): Launched 10:30:44.716295 run iperf3-srv_10.42.42.10(pid=9103): Launched 10:30:44.906624 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:30:45.036597 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:30:45.363533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9104): Launched 10:30:45.635478 run iperf3-srv_10.42.42.10(pid=9105): Launched 10:30:45.825903 tst cs_paging_gprs_active.py:38: start network... 10:30:45.975750 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:30:46.494066 run create_hlr_db(pid=9106): Launched 10:30:46.698051 bus /gobi_6: Setting Powered False 10:30:47.710551 run create_hlr_db(pid=9106): Terminated: ok {rc=0} 10:30:48.134872 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9108): Launched 10:30:48.450211 run osmo-hlr_10.42.42.2(pid=9109): Launched 10:30:48.565320 run osmo-stp_10.42.42.5: Starting osmo-stp 10:30:49.109173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9111): Launched 10:30:49.424511 run osmo-stp_10.42.42.5(pid=9112): Launched 10:30:49.537430 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:30:50.083171 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9114): Launched 10:30:50.194767 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:30:50.470367 run patchelf(pid=9115): Launched 10:30:50.652895 run osmo-stp_10.42.42.5(pid=9112): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9112)] 10:30:50.786149 run osmo-stp_10.42.42.5(pid=9112): stdout: | (launched: 2022-12-13_10:30:49.267348) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:50.919508 run osmo-stp_10.42.42.5(pid=9112): stderr: | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103049439 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:51.048501 run osmo-stp_10.42.42.5(pid=9112): stdout: | (launched: 2022-12-13_10:30:49.267348) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:51.176671 run osmo-stp_10.42.42.5(pid=9112): stderr: | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103049439 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103049439 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103049440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:51.326461 run patchelf(pid=9115): Terminating (SIGINT) 10:30:51.502053 run patchelf(pid=9115): Terminated: ok {rc=0} 10:30:51.534211 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9112): Process ended prematurely: osmo-stp_10.42.42.5(pid=9112) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9112)] [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:30:51.543542 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:30:51.603450 run osmo-hlr_10.42.42.2(pid=9109): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9109)] 10:30:51.652540 run osmo-hlr_10.42.42.2(pid=9109): stdout: | (launched: 2022-12-13_10:30:48.293257) 10:30:51.702162 run osmo-hlr_10.42.42.2(pid=9109): stderr: | �[0;m�[1;31m20221213103048470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103048470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103048470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103048471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103048471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103048471 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103048486 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103048494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103048494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103048494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:30:51.744498 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9102): Terminating (SIGTERM) 10:30:51.784300 run iperf3-srv_10.42.42.10(pid=9103): Terminating (SIGTERM) 10:30:51.825066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9104): Terminating (SIGTERM) 10:30:51.867210 run iperf3-srv_10.42.42.10(pid=9105): Terminating (SIGTERM) 10:30:51.907946 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9108): Terminating (SIGTERM) 10:30:51.947501 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9111): Terminating (SIGTERM) 10:30:51.987044 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9114): Terminating (SIGTERM) 10:30:51.996218 --- ParallelTerminationStrategy: PID 9102 died... 10:30:52.049103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9102): Terminated: ok {rc=0} 10:30:52.058601 --- ParallelTerminationStrategy: PID 9103 died... 10:30:52.111179 run iperf3-srv_10.42.42.10(pid=9103): Terminated {rc=256} 10:30:52.120622 --- ParallelTerminationStrategy: PID 9104 died... 10:30:52.173439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9104): Terminated: ok {rc=0} 10:30:52.182885 --- ParallelTerminationStrategy: PID 9105 died... 10:30:52.235627 run iperf3-srv_10.42.42.10(pid=9105): Terminated {rc=256} 10:30:52.245162 --- ParallelTerminationStrategy: PID 9108 died... 10:30:52.297920 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9108): Terminated: ok {rc=0} 10:30:52.307437 --- ParallelTerminationStrategy: PID 9111 died... 10:30:52.360711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9111): Terminated: ok {rc=0} 10:30:52.370284 --- ParallelTerminationStrategy: PID 9114 died... 10:30:52.422966 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9114): Terminated: ok {rc=0} 10:30:52.511508 bus /gobi_0: Setting Powered False 10:30:53.614517 bus /gobi_0: Setting Powered False 10:30:54.726280 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9112): Process ended prematurely: osmo-stp_10.42.42.5(pid=9112) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9112)]