Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8969): Process ended prematurely: osmo-stp_10.42.42.5(pid=8969) [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8969)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:28:40.411421 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:40.422965 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:28:40.571897 tst cs_paging_gprs_active.py: using LAC 33316 10:28:40.704692 tst cs_paging_gprs_active.py: using RAC 166 10:28:40.836898 tst cs_paging_gprs_active.py: using CellId 33316 10:28:40.969026 tst cs_paging_gprs_active.py: using BVCI 33317 10:28:40.995019 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.006446 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.017965 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.029401 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.041139 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.052794 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.064840 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.076394 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:28:41.088263 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:28:41.208461 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:28:41.512609 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:28:41.654658 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:28:42.005882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8959): Launched 10:28:42.296009 run iperf3-srv_10.42.42.10(pid=8960): Launched 10:28:42.502601 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:28:42.643701 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:28:42.993399 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8961): Launched 10:28:43.284057 run iperf3-srv_10.42.42.10(pid=8962): Launched 10:28:43.489627 tst cs_paging_gprs_active.py:38: start network... 10:28:43.630457 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:28:44.157289 run create_hlr_db(pid=8963): Launched 10:28:44.350767 bus /gobi_6: Setting Powered False 10:28:45.371540 run create_hlr_db(pid=8963): Terminated: ok {rc=0} 10:28:45.794104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8965): Launched 10:28:46.263265 run osmo-hlr_10.42.42.2(pid=8966): Launched 10:28:46.407638 run osmo-stp_10.42.42.5: Starting osmo-stp 10:28:47.075367 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8968): Launched 10:28:47.420399 run osmo-stp_10.42.42.5(pid=8969): Launched 10:28:47.546246 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:28:48.135294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8971): Launched 10:28:48.256201 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:28:48.553007 run patchelf(pid=8972): Launched 10:28:48.748659 run osmo-stp_10.42.42.5(pid=8969): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8969)] 10:28:48.891419 run osmo-stp_10.42.42.5(pid=8969): stdout: | (launched: 2022-12-13_10:28:47.250377) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:28:49.034355 run osmo-stp_10.42.42.5(pid=8969): stderr: | �[0;m�[38;5;43m20221213102847440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102847440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102847441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102847441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102847441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102847442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102847442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:28:49.172852 run osmo-stp_10.42.42.5(pid=8969): stdout: | (launched: 2022-12-13_10:28:47.250377) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:28:49.310199 run osmo-stp_10.42.42.5(pid=8969): stderr: | �[0;m�[38;5;43m20221213102847440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102847440 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102847441 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102847441 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102847441 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102847442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102847442 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:28:49.470531 run patchelf(pid=8972): Terminating (SIGINT) 10:28:49.659019 run patchelf(pid=8972): Terminated: ok {rc=0} 10:28:49.693584 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8969): Process ended prematurely: osmo-stp_10.42.42.5(pid=8969) [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8969)] [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:28:49.703447 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 10:28:49.767573 run osmo-hlr_10.42.42.2(pid=8966): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8966)] 10:28:49.819536 run osmo-hlr_10.42.42.2(pid=8966): stdout: | (launched: 2022-12-13_10:28:45.985546) 10:28:49.872266 run osmo-hlr_10.42.42.2(pid=8966): stderr: | �[0;m�[1;31m20221213102846257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102846257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102846257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102846257 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102846258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102846258 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102846271 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102846287 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102846288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102846288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:28:49.917362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8959): Terminating (SIGTERM) 10:28:49.959922 run iperf3-srv_10.42.42.10(pid=8960): Terminating (SIGTERM) 10:28:50.003039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8961): Terminating (SIGTERM) 10:28:50.045587 run iperf3-srv_10.42.42.10(pid=8962): Terminating (SIGTERM) 10:28:50.088000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8965): Terminating (SIGTERM) 10:28:50.130772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8968): Terminating (SIGTERM) 10:28:50.173461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8971): Terminating (SIGTERM) 10:28:50.183246 --- ParallelTerminationStrategy: PID 8959 died... 10:28:50.240386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8959): Terminated: ok {rc=0} 10:28:50.250557 --- ParallelTerminationStrategy: PID 8960 died... 10:28:50.307146 run iperf3-srv_10.42.42.10(pid=8960): Terminated {rc=256} 10:28:50.317389 --- ParallelTerminationStrategy: PID 8961 died... 10:28:50.374183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8961): Terminated: ok {rc=0} 10:28:50.384346 --- ParallelTerminationStrategy: PID 8962 died... 10:28:50.441069 run iperf3-srv_10.42.42.10(pid=8962): Terminated {rc=256} 10:28:50.451074 --- ParallelTerminationStrategy: PID 8965 died... 10:28:50.507922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8965): Terminated: ok {rc=0} 10:28:50.518103 --- ParallelTerminationStrategy: PID 8968 died... 10:28:50.575221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8968): Terminated: ok {rc=0} 10:28:50.585489 --- ParallelTerminationStrategy: PID 8971 died... 10:28:50.642283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8971): Terminated: ok {rc=0} 10:28:50.730470 bus /gobi_0: Setting Powered False 10:28:51.834459 bus /gobi_0: Setting Powered False 10:28:52.946413 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8969): Process ended prematurely: osmo-stp_10.42.42.5(pid=8969) [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8969)]