Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=9182): Process ended prematurely: osmo-stp_10.42.42.5(pid=9182) [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9182)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 10:31:43.813020 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:43.825088 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 10:31:43.978697 tst cs_paging_gprs_active.py: using LAC 33331 10:31:44.110237 tst cs_paging_gprs_active.py: using RAC 181 10:31:44.241643 tst cs_paging_gprs_active.py: using CellId 33331 10:31:44.374678 tst cs_paging_gprs_active.py: using BVCI 33332 10:31:44.400566 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.412500 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.424098 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.435824 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.448454 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.461056 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.473752 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.486226 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 10:31:44.499104 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:31:44.620469 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 10:31:44.910449 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:31:45.041336 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:31:45.368538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9172): Launched 10:31:45.642515 run iperf3-srv_10.42.42.10(pid=9173): Launched 10:31:45.834533 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:31:45.983765 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:31:46.328268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9174): Launched 10:31:46.622838 run iperf3-srv_10.42.42.10(pid=9175): Launched 10:31:46.840125 tst cs_paging_gprs_active.py:38: start network... 10:31:46.988434 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:31:47.526040 run create_hlr_db(pid=9176): Launched 10:31:47.720291 bus /gobi_6: Setting Powered False 10:31:48.740701 run create_hlr_db(pid=9176): Terminated: ok {rc=0} 10:31:49.188141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9178): Launched 10:31:49.526829 run osmo-hlr_10.42.42.2(pid=9179): Launched 10:31:49.650834 run osmo-stp_10.42.42.5: Starting osmo-stp 10:31:50.235710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9181): Launched 10:31:50.573478 run osmo-stp_10.42.42.5(pid=9182): Launched 10:31:50.696324 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:31:51.282748 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9184): Launched 10:31:51.403205 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:31:51.700506 run patchelf(pid=9185): Launched 10:31:51.897354 run osmo-stp_10.42.42.5(pid=9182): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9182)] 10:31:52.039964 run osmo-stp_10.42.42.5(pid=9182): stdout: | (launched: 2022-12-13_10:31:50.406451) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:31:52.182758 run osmo-stp_10.42.42.5(pid=9182): stderr: | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103150599 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:31:52.321118 run osmo-stp_10.42.42.5(pid=9182): stdout: | (launched: 2022-12-13_10:31:50.406451) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:31:52.458428 run osmo-stp_10.42.42.5(pid=9182): stderr: | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103150598 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103150599 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103150599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:31:52.618349 run patchelf(pid=9185): Terminating (SIGINT) 10:31:52.806812 run patchelf(pid=9185): Terminated: ok {rc=0} 10:31:52.841446 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9182): Process ended prematurely: osmo-stp_10.42.42.5(pid=9182) [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9182)] [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 10:31:52.851810 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 10:31:52.915669 run osmo-hlr_10.42.42.2(pid=9179): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9179)] 10:31:52.967450 run osmo-hlr_10.42.42.2(pid=9179): stdout: | (launched: 2022-12-13_10:31:49.359038) 10:31:53.020307 run osmo-hlr_10.42.42.2(pid=9179): stderr: | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103149557 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103149569 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103149578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103149579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103149579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:31:53.065391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9172): Terminating (SIGTERM) 10:31:53.108096 run iperf3-srv_10.42.42.10(pid=9173): Terminating (SIGTERM) 10:31:53.150642 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9174): Terminating (SIGTERM) 10:31:53.193378 run iperf3-srv_10.42.42.10(pid=9175): Terminating (SIGTERM) 10:31:53.236071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9178): Terminating (SIGTERM) 10:31:53.278931 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9181): Terminating (SIGTERM) 10:31:53.321680 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9184): Terminating (SIGTERM) 10:31:53.331506 --- ParallelTerminationStrategy: PID 9172 died... 10:31:53.388629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9172): Terminated: ok {rc=0} 10:31:53.398943 --- ParallelTerminationStrategy: PID 9173 died... 10:31:53.455437 run iperf3-srv_10.42.42.10(pid=9173): Terminated {rc=256} 10:31:53.465613 --- ParallelTerminationStrategy: PID 9174 died... 10:31:53.522268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9174): Terminated: ok {rc=0} 10:31:53.532355 --- ParallelTerminationStrategy: PID 9175 died... 10:31:53.589268 run iperf3-srv_10.42.42.10(pid=9175): Terminated {rc=256} 10:31:53.599436 --- ParallelTerminationStrategy: PID 9178 died... 10:31:53.656577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9178): Terminated: ok {rc=0} 10:31:53.666864 --- ParallelTerminationStrategy: PID 9181 died... 10:31:53.724154 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9181): Terminated: ok {rc=0} 10:31:53.734226 --- ParallelTerminationStrategy: PID 9184 died... 10:31:53.791729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9184): Terminated: ok {rc=0} 10:31:53.883683 bus /gobi_0: Setting Powered False 10:31:54.989999 bus /gobi_0: Setting Powered False 10:31:56.102436 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9182): Process ended prematurely: osmo-stp_10.42.42.5(pid=9182) [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9182)]