Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9938): Process ended prematurely: osmo-stp_10.42.42.5(pid=9938) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9938)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:38:44.682981 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:44.694396 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:38:44.859987 tst cs_paging_gprs_active.py: using LAC 33368 10:38:44.979660 tst cs_paging_gprs_active.py: using RAC 218 10:38:45.100297 tst cs_paging_gprs_active.py: using CellId 33368 10:38:45.219768 tst cs_paging_gprs_active.py: using BVCI 33369 10:38:45.243100 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.253983 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.264748 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.275419 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.286073 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.297138 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.307990 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.318608 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:38:45.329400 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:38:45.446204 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:38:45.726165 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:38:45.853749 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:38:46.244161 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9657): Launched 10:38:46.531021 run iperf3-srv_10.42.42.10(pid=9658): Launched 10:38:46.725439 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:38:46.867372 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:38:47.235757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9683): Launched 10:38:47.629924 run iperf3-srv_10.42.42.10(pid=9696): Launched 10:38:47.855636 tst cs_paging_gprs_active.py:38: start network... 10:38:47.997776 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:38:48.644663 run create_hlr_db(pid=9744): Launched 10:38:48.881279 bus /gobi_6: Setting Powered False 10:38:49.853454 run create_hlr_db(pid=9744): Terminated: ok {rc=0} 10:38:50.346605 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9932): Launched 10:38:50.758801 run osmo-hlr_10.42.42.2(pid=9933): Launched 10:38:50.991490 run osmo-stp_10.42.42.5: Starting osmo-stp 10:38:51.626466 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9937): Launched 10:38:52.061405 run osmo-stp_10.42.42.5(pid=9938): Launched 10:38:52.275074 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:38:52.863466 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9940): Launched 10:38:52.984057 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:38:53.285558 run patchelf(pid=9941): Launched 10:38:53.480837 run osmo-stp_10.42.42.5(pid=9938): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9938)] 10:38:53.625022 run osmo-stp_10.42.42.5(pid=9938): stdout: | (launched: 2022-12-13_10:38:51.795159) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:38:53.769428 run osmo-stp_10.42.42.5(pid=9938): stderr: | �[0;m�[38;5;43m20221213103852084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103852089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103852089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103852090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:38:53.908716 run osmo-stp_10.42.42.5(pid=9938): stdout: | (launched: 2022-12-13_10:38:51.795159) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:38:54.046568 run osmo-stp_10.42.42.5(pid=9938): stderr: | �[0;m�[38;5;43m20221213103852084 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103852089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103852089 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103852090 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103852090 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:38:54.207541 run patchelf(pid=9941): Terminating (SIGINT) 10:38:54.397116 run patchelf(pid=9941): Terminated: ok {rc=0} 10:38:54.432441 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9938): Process ended prematurely: osmo-stp_10.42.42.5(pid=9938) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9938)] [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:38:54.443642 tst cs_paging_gprs_active.py:38: Test FAILED (9.8 sec) 10:38:54.510250 run osmo-hlr_10.42.42.2(pid=9933): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9933)] 10:38:54.566806 run osmo-hlr_10.42.42.2(pid=9933): stdout: | (launched: 2022-12-13_10:38:50.504721) 10:38:54.622284 run osmo-hlr_10.42.42.2(pid=9933): stderr: | �[0;m�[1;31m20221213103850837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103850837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103850837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103850838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103850838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103850838 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103850859 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103850871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103850872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103850872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:38:54.669728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9657): Terminating (SIGTERM) 10:38:54.716199 run iperf3-srv_10.42.42.10(pid=9658): Terminating (SIGTERM) 10:38:54.762585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9683): Terminating (SIGTERM) 10:38:54.809216 run iperf3-srv_10.42.42.10(pid=9696): Terminating (SIGTERM) 10:38:54.856324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9932): Terminating (SIGTERM) 10:38:54.901791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9937): Terminating (SIGTERM) 10:38:54.949837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9940): Terminating (SIGTERM) 10:38:54.960886 --- ParallelTerminationStrategy: PID 9657 died... 10:38:55.022600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9657): Terminated: ok {rc=0} 10:38:55.034675 --- ParallelTerminationStrategy: PID 9658 died... 10:38:55.093438 run iperf3-srv_10.42.42.10(pid=9658): Terminated {rc=256} 10:38:55.105183 --- ParallelTerminationStrategy: PID 9683 died... 10:38:55.163965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9683): Terminated: ok {rc=0} 10:38:55.175837 --- ParallelTerminationStrategy: PID 9696 died... 10:38:55.234387 run iperf3-srv_10.42.42.10(pid=9696): Terminated {rc=256} 10:38:55.245887 --- ParallelTerminationStrategy: PID 9932 died... 10:38:55.305696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9932): Terminated: ok {rc=0} 10:38:55.317648 --- ParallelTerminationStrategy: PID 9937 died... 10:38:55.376773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9937): Terminated: ok {rc=0} 10:38:55.388799 --- ParallelTerminationStrategy: PID 9940 died... 10:38:55.447827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9940): Terminated: ok {rc=0} 10:38:55.541185 bus /gobi_0: Setting Powered False 10:38:56.651955 bus /gobi_0: Setting Powered False 10:38:57.769948 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9938): Process ended prematurely: osmo-stp_10.42.42.5(pid=9938) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9938)]