Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10006): Process ended prematurely: osmo-stp_10.42.42.5(pid=10006) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10006)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:39:47.325891 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.337391 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:39:47.511895 tst cs_paging_gprs_active.py: using LAC 33373 10:39:47.641505 tst cs_paging_gprs_active.py: using RAC 223 10:39:47.769571 tst cs_paging_gprs_active.py: using CellId 33373 10:39:47.899402 tst cs_paging_gprs_active.py: using BVCI 33374 10:39:47.924600 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.936198 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.947449 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.958718 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.970271 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.981868 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:47.993526 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:48.005024 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:39:48.016687 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:39:48.135375 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:39:48.416367 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:39:48.544282 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:39:48.863691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9996): Launched 10:39:49.129147 run iperf3-srv_10.42.42.10(pid=9997): Launched 10:39:49.315630 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:39:49.442927 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:39:49.758956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9998): Launched 10:39:50.024897 run iperf3-srv_10.42.42.10(pid=9999): Launched 10:39:50.210451 tst cs_paging_gprs_active.py:38: start network... 10:39:50.337455 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:39:50.826311 run create_hlr_db(pid=10000): Launched 10:39:51.001209 bus /gobi_6: Setting Powered False 10:39:52.023938 run create_hlr_db(pid=10000): Terminated: ok {rc=0} 10:39:52.431549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10002): Launched 10:39:52.738197 run osmo-hlr_10.42.42.2(pid=10003): Launched 10:39:52.849585 run osmo-stp_10.42.42.5: Starting osmo-stp 10:39:53.377988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10005): Launched 10:39:53.683378 run osmo-stp_10.42.42.5(pid=10006): Launched 10:39:53.795022 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:39:54.327059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10008): Launched 10:39:54.435962 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:39:54.703820 run patchelf(pid=10009): Launched 10:39:54.882635 run osmo-stp_10.42.42.5(pid=10006): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10006)] 10:39:55.013113 run osmo-stp_10.42.42.5(pid=10006): stdout: | (launched: 2022-12-13_10:39:53.532361) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:55.143981 run osmo-stp_10.42.42.5(pid=10006): stderr: | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103953699 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:55.269992 run osmo-stp_10.42.42.5(pid=10006): stdout: | (launched: 2022-12-13_10:39:53.532361) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:39:55.394846 run osmo-stp_10.42.42.5(pid=10006): stderr: | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103953698 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103953699 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103953699 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:39:55.540871 run patchelf(pid=10009): Terminating (SIGINT) 10:39:55.712725 run patchelf(pid=10009): Terminated: ok {rc=0} 10:39:55.744283 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10006): Process ended prematurely: osmo-stp_10.42.42.5(pid=10006) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10006)] [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:39:55.753631 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 10:39:55.813612 run osmo-hlr_10.42.42.2(pid=10003): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10003)] 10:39:55.862763 run osmo-hlr_10.42.42.2(pid=10003): stdout: | (launched: 2022-12-13_10:39:52.586845) 10:39:55.912751 run osmo-hlr_10.42.42.2(pid=10003): stderr: | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103952764 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103952776 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103952785 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103952785 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103952785 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:39:55.954993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9996): Terminating (SIGTERM) 10:39:55.994580 run iperf3-srv_10.42.42.10(pid=9997): Terminating (SIGTERM) 10:39:56.034313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9998): Terminating (SIGTERM) 10:39:56.073974 run iperf3-srv_10.42.42.10(pid=9999): Terminating (SIGTERM) 10:39:56.113914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10002): Terminating (SIGTERM) 10:39:56.153629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10005): Terminating (SIGTERM) 10:39:56.193381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10008): Terminating (SIGTERM) 10:39:56.202551 --- ParallelTerminationStrategy: PID 9996 died... 10:39:56.255970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9996): Terminated: ok {rc=0} 10:39:56.265580 --- ParallelTerminationStrategy: PID 9997 died... 10:39:56.318390 run iperf3-srv_10.42.42.10(pid=9997): Terminated {rc=256} 10:39:56.327768 --- ParallelTerminationStrategy: PID 9998 died... 10:39:56.380539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9998): Terminated: ok {rc=0} 10:39:56.390029 --- ParallelTerminationStrategy: PID 9999 died... 10:39:56.442917 run iperf3-srv_10.42.42.10(pid=9999): Terminated {rc=256} 10:39:56.452351 --- ParallelTerminationStrategy: PID 10002 died... 10:39:56.505399 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10002): Terminated: ok {rc=0} 10:39:56.515019 --- ParallelTerminationStrategy: PID 10005 died... 10:39:56.568139 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10005): Terminated: ok {rc=0} 10:39:56.577747 --- ParallelTerminationStrategy: PID 10008 died... 10:39:56.630731 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10008): Terminated: ok {rc=0} 10:39:56.720136 bus /gobi_0: Setting Powered False 10:39:57.828997 bus /gobi_0: Setting Powered False 10:39:58.937159 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10006): Process ended prematurely: osmo-stp_10.42.42.5(pid=10006) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10006)]