Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=17804): Process ended prematurely: osmo-stp_10.42.42.5(pid=17804) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17804)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py ---------------------------------------------- 12:00:23.891090 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:23.906381 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:00:24.062528 tst ping_idle_ping.py: using LAC 33796 12:00:24.189059 tst ping_idle_ping.py: using RAC 136 12:00:24.310443 tst ping_idle_ping.py: using CellId 33796 12:00:24.432663 tst ping_idle_ping.py: using BVCI 33797 12:00:24.457103 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.469581 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.481985 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.494494 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.506885 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.519431 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.532076 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:00:24.544573 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:00:24.829945 tst ping_idle_ping.py:24: start network... 12:00:24.959080 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:00:25.490718 run create_hlr_db(pid=17798): Launched 12:00:25.684603 bus /gobi_6: Setting Powered False 12:00:26.708180 run create_hlr_db(pid=17798): Terminated: ok {rc=0} 12:00:27.165625 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17800): Launched 12:00:27.599348 run osmo-hlr_10.42.42.2(pid=17801): Launched 12:00:27.844392 run osmo-stp_10.42.42.5: Starting osmo-stp 12:00:28.438784 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17803): Launched 12:00:28.881219 run osmo-stp_10.42.42.5(pid=17804): Launched 12:00:29.092393 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:00:29.638786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17807): Launched 12:00:29.746845 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:00:30.015130 run patchelf(pid=17808): Launched 12:00:30.193459 run osmo-stp_10.42.42.5(pid=17804): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17804)] 12:00:30.323771 run osmo-stp_10.42.42.5(pid=17804): stdout: | (launched: 2022-12-13_12:00:28.613870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:00:30.454474 run osmo-stp_10.42.42.5(pid=17804): stderr: | �[0;m�[38;5;43m20221213120028907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120028907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120028908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120028908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:00:30.580590 run osmo-stp_10.42.42.5(pid=17804): stdout: | (launched: 2022-12-13_12:00:28.613870) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:00:30.705560 run osmo-stp_10.42.42.5(pid=17804): stderr: | �[0;m�[38;5;43m20221213120028907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213120028907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213120028908 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213120028908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213120028909 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:00:30.855076 run patchelf(pid=17808): Terminating (SIGINT) 12:00:31.046397 run patchelf(pid=17808): Terminated: ok {rc=0} 12:00:31.092487 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=17804): Process ended prematurely: osmo-stp_10.42.42.5(pid=17804) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17804)] [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27] 12:00:31.109237 tst ping_idle_ping.py:27: Test FAILED (7.2 sec) 12:00:31.175497 run osmo-hlr_10.42.42.2(pid=17801): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17801)] 12:00:31.230601 run osmo-hlr_10.42.42.2(pid=17801): stdout: | (launched: 2022-12-13_12:00:27.336436) 12:00:31.286519 run osmo-hlr_10.42.42.2(pid=17801): stderr: | �[0;m�[1;31m20221213120027642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213120027642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213120027642 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213120027643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213120027643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213120027643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213120027663 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213120027675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213120027675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213120027675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:00:31.334109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17800): Terminating (SIGTERM) 12:00:31.380792 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17803): Terminating (SIGTERM) 12:00:31.428866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17807): Terminating (SIGTERM) 12:00:31.439828 --- ParallelTerminationStrategy: PID 17800 died... 12:00:31.501542 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17800): Terminated: ok {rc=0} 12:00:31.511662 --- ParallelTerminationStrategy: PID 17803 died... 12:00:31.566792 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17803): Terminated: ok {rc=0} 12:00:31.576867 --- ParallelTerminationStrategy: PID 17807 died... 12:00:31.631574 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17807): Terminated: ok {rc=0} 12:00:31.716928 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17804): Process ended prematurely: osmo-stp_10.42.42.5(pid=17804) [trial-2389↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17804)]