Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=28161): Process ended prematurely: osmo-stp_10.42.42.5(pid=28161) [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28161)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 13:49:44.861466 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:44.871991 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 13:49:45.008614 tst cs_paging_gprs_active.py: using LAC 34371 13:49:45.128153 tst cs_paging_gprs_active.py: using RAC 201 13:49:45.248828 tst cs_paging_gprs_active.py: using CellId 34371 13:49:45.369295 tst cs_paging_gprs_active.py: using BVCI 34372 13:49:45.392131 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.402724 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.413036 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.423405 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.434155 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.445098 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.455756 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.466213 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:49:45.476743 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:49:45.597480 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:49:45.885440 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:49:46.013699 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:49:46.345915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28151): Launched 13:49:46.635235 run iperf3-srv_10.42.42.10(pid=28152): Launched 13:49:46.840893 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:49:46.982875 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:49:47.324159 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28153): Launched 13:49:47.602981 run iperf3-srv_10.42.42.10(pid=28154): Launched 13:49:47.801206 tst cs_paging_gprs_active.py:38: start network... 13:49:47.936207 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:49:48.446665 run create_hlr_db(pid=28155): Launched 13:49:48.634288 bus /sierra_2: Setting Powered False 13:49:49.654936 run create_hlr_db(pid=28155): Terminated: ok {rc=0} 13:49:50.061668 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28157): Launched 13:49:50.363624 run osmo-hlr_10.42.42.2(pid=28158): Launched 13:49:50.478554 run osmo-stp_10.42.42.5: Starting osmo-stp 13:49:51.002475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28160): Launched 13:49:51.305246 run osmo-stp_10.42.42.5(pid=28161): Launched 13:49:51.415064 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:49:51.940693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28163): Launched 13:49:52.047658 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:49:52.310991 run patchelf(pid=28164): Launched 13:49:52.488203 run osmo-stp_10.42.42.5(pid=28161): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28161)] 13:49:52.617711 run osmo-stp_10.42.42.5(pid=28161): stdout: | (launched: 2022-12-13_13:49:51.155848) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:49:52.747339 run osmo-stp_10.42.42.5(pid=28161): stderr: | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134951327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:49:52.872405 run osmo-stp_10.42.42.5(pid=28161): stdout: | (launched: 2022-12-13_13:49:51.155848) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:49:52.996171 run osmo-stp_10.42.42.5(pid=28161): stderr: | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134951326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134951327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134951327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:49:53.141242 run patchelf(pid=28164): Terminating (SIGINT) 13:49:53.311212 run patchelf(pid=28164): Terminated: ok {rc=0} 13:49:53.343099 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28161): Process ended prematurely: osmo-stp_10.42.42.5(pid=28161) [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28161)] [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 13:49:53.352317 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:49:53.411348 run osmo-hlr_10.42.42.2(pid=28158): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28158)] 13:49:53.459361 run osmo-hlr_10.42.42.2(pid=28158): stdout: | (launched: 2022-12-13_13:49:50.215062) 13:49:53.508262 run osmo-hlr_10.42.42.2(pid=28158): stderr: | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213134950391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213134950403 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213134950414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213134950414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213134950414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:49:53.550339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28151): Terminating (SIGTERM) 13:49:53.589574 run iperf3-srv_10.42.42.10(pid=28152): Terminating (SIGTERM) 13:49:53.629065 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28153): Terminating (SIGTERM) 13:49:53.668375 run iperf3-srv_10.42.42.10(pid=28154): Terminating (SIGTERM) 13:49:53.707759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28157): Terminating (SIGTERM) 13:49:53.747111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28160): Terminating (SIGTERM) 13:49:53.786476 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28163): Terminating (SIGTERM) 13:49:53.795648 --- ParallelTerminationStrategy: PID 28151 died... 13:49:53.848316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28151): Terminated: ok {rc=0} 13:49:53.857906 --- ParallelTerminationStrategy: PID 28152 died... 13:49:53.910293 run iperf3-srv_10.42.42.10(pid=28152): Terminated {rc=256} 13:49:53.919601 --- ParallelTerminationStrategy: PID 28153 died... 13:49:53.971872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28153): Terminated: ok {rc=0} 13:49:53.981344 --- ParallelTerminationStrategy: PID 28154 died... 13:49:54.033286 run iperf3-srv_10.42.42.10(pid=28154): Terminated {rc=256} 13:49:54.042762 --- ParallelTerminationStrategy: PID 28157 died... 13:49:54.095151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28157): Terminated: ok {rc=0} 13:49:54.104615 --- ParallelTerminationStrategy: PID 28160 died... 13:49:54.156887 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28160): Terminated: ok {rc=0} 13:49:54.166493 --- ParallelTerminationStrategy: PID 28163 died... 13:49:54.218736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28163): Terminated: ok {rc=0} 13:49:54.305824 bus /gobi_0: Setting Powered False 13:49:55.410494 bus /gobi_0: Setting Powered False 13:49:56.516139 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28161): Process ended prematurely: osmo-stp_10.42.42.5(pid=28161) [trial-2390↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28161)]