Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26276): Process ended prematurely: osmo-stp_10.42.42.5(pid=26276) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26276)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:26:37.729903 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:37.740837 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:26:37.901360 tst cs_paging_gprs_active.py: using LAC 34248 13:26:38.022452 tst cs_paging_gprs_active.py: using RAC 78 13:26:38.145240 tst cs_paging_gprs_active.py: using CellId 34248 13:26:38.274907 tst cs_paging_gprs_active.py: using BVCI 34249 13:26:38.300615 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.312158 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.323803 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.335332 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.347500 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.359895 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.372298 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.384595 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:26:38.397135 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:26:38.517437 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:26:38.816268 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:26:38.955430 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:26:39.298131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26266): Launched 13:26:39.584186 run iperf3-srv_10.42.42.10(pid=26267): Launched 13:26:39.786687 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:26:39.925490 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:26:40.269170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26268): Launched 13:26:40.555418 run iperf3-srv_10.42.42.10(pid=26269): Launched 13:26:40.758443 tst cs_paging_gprs_active.py:38: start network... 13:26:40.897860 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:26:41.419776 run create_hlr_db(pid=26270): Launched 13:26:41.610392 bus /gobi_6: Setting Powered False 13:26:42.632072 run create_hlr_db(pid=26270): Terminated: ok {rc=0} 13:26:43.047767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26272): Launched 13:26:43.357483 run osmo-hlr_10.42.42.2(pid=26273): Launched 13:26:43.472219 run osmo-stp_10.42.42.5: Starting osmo-stp 13:26:44.011200 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26275): Launched 13:26:44.322185 run osmo-stp_10.42.42.5(pid=26276): Launched 13:26:44.433034 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:26:44.971926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26278): Launched 13:26:45.081417 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:26:45.349966 run patchelf(pid=26279): Launched 13:26:45.529466 run osmo-stp_10.42.42.5(pid=26276): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26276)] 13:26:45.660681 run osmo-stp_10.42.42.5(pid=26276): stdout: | (launched: 2022-12-13_13:26:44.169085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:26:45.792047 run osmo-stp_10.42.42.5(pid=26276): stderr: | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132644337 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:26:45.943922 run osmo-stp_10.42.42.5(pid=26276): stdout: | (launched: 2022-12-13_13:26:44.169085) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:26:46.073625 run osmo-stp_10.42.42.5(pid=26276): stderr: | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213132644336 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213132644337 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213132644337 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:26:46.225468 run patchelf(pid=26279): Terminating (SIGINT) 13:26:46.403594 run patchelf(pid=26279): Terminated: ok {rc=0} 13:26:46.436730 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26276): Process ended prematurely: osmo-stp_10.42.42.5(pid=26276) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26276)] [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:26:46.446802 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:26:46.508828 run osmo-hlr_10.42.42.2(pid=26273): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26273)] 13:26:46.558968 run osmo-hlr_10.42.42.2(pid=26273): stdout: | (launched: 2022-12-13_13:26:43.204342) 13:26:46.610664 run osmo-hlr_10.42.42.2(pid=26273): stderr: | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213132643381 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213132643394 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213132643402 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213132643402 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213132643402 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:26:46.654646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26266): Terminating (SIGTERM) 13:26:46.698242 run iperf3-srv_10.42.42.10(pid=26267): Terminating (SIGTERM) 13:26:46.741308 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26268): Terminating (SIGTERM) 13:26:46.783925 run iperf3-srv_10.42.42.10(pid=26269): Terminating (SIGTERM) 13:26:46.826516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26272): Terminating (SIGTERM) 13:26:46.866947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26275): Terminating (SIGTERM) 13:26:46.907184 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26278): Terminating (SIGTERM) 13:26:46.916355 --- ParallelTerminationStrategy: PID 26266 died... 13:26:46.970245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26266): Terminated: ok {rc=0} 13:26:46.980123 --- ParallelTerminationStrategy: PID 26267 died... 13:26:47.033673 run iperf3-srv_10.42.42.10(pid=26267): Terminated {rc=256} 13:26:47.043499 --- ParallelTerminationStrategy: PID 26268 died... 13:26:47.097246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26268): Terminated: ok {rc=0} 13:26:47.107121 --- ParallelTerminationStrategy: PID 26269 died... 13:26:47.160296 run iperf3-srv_10.42.42.10(pid=26269): Terminated {rc=256} 13:26:47.170120 --- ParallelTerminationStrategy: PID 26272 died... 13:26:47.223536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26272): Terminated: ok {rc=0} 13:26:47.233444 --- ParallelTerminationStrategy: PID 26275 died... 13:26:47.286063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26275): Terminated: ok {rc=0} 13:26:47.295522 --- ParallelTerminationStrategy: PID 26278 died... 13:26:47.347957 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26278): Terminated: ok {rc=0} 13:26:47.431618 bus /gobi_0: Setting Powered False 13:26:48.532978 bus /gobi_0: Setting Powered False 13:26:49.643482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26276): Process ended prematurely: osmo-stp_10.42.42.5(pid=26276) [trial-2390↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26276)]