Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)]
Standard Output
---------------------------------------------- trial-2391 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 15:54:59.696469 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:59.707909 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:54:59.863435 tst cs_paging_gprs_active.py: using LAC 34663 15:54:59.995043 tst cs_paging_gprs_active.py: using RAC 238 15:55:00.126999 tst cs_paging_gprs_active.py: using CellId 34663 15:55:00.257224 tst cs_paging_gprs_active.py: using BVCI 34664 15:55:00.283038 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.294869 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.306389 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.317810 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.329591 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.341450 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.353545 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.365656 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:55:00.377748 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:55:00.499108 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:55:00.790147 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:55:00.927188 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:55:01.270965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2523): Launched 15:55:01.563191 run iperf3-srv_10.42.42.10(pid=2524): Launched 15:55:01.768244 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:55:01.901754 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:55:02.248066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2528): Launched 15:55:02.543480 run iperf3-srv_10.42.42.10(pid=2529): Launched 15:55:02.749834 tst cs_paging_gprs_active.py:38: start network... 15:55:02.890534 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:55:03.420594 run create_hlr_db(pid=2530): Launched 15:55:03.614958 bus /gobi_6: Setting Powered False 15:55:04.634664 run create_hlr_db(pid=2530): Terminated: ok {rc=0} 15:55:05.060333 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Launched 15:55:05.381190 run osmo-hlr_10.42.42.2(pid=2533): Launched 15:55:05.507384 run osmo-stp_10.42.42.5: Starting osmo-stp 15:55:06.059164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Launched 15:55:06.376627 run osmo-stp_10.42.42.5(pid=2536): Launched 15:55:06.491143 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:55:07.040007 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Launched 15:55:07.151538 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:55:07.427264 run patchelf(pid=2539): Launched 15:55:07.610911 run osmo-stp_10.42.42.5(pid=2536): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)] 15:55:07.744696 run osmo-stp_10.42.42.5(pid=2536): stdout: | (launched: 2022-12-13_15:55:06.219150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:55:07.878936 run osmo-stp_10.42.42.5(pid=2536): stderr: | �[0;m�[38;5;43m20221213155506393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155506393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155506394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155506394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155506394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155506395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155506395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:55:08.008155 run osmo-stp_10.42.42.5(pid=2536): stdout: | (launched: 2022-12-13_15:55:06.219150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:55:08.136221 run osmo-stp_10.42.42.5(pid=2536): stderr: | �[0;m�[38;5;43m20221213155506393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155506393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155506394 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155506394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155506394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155506395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155506395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:55:08.286100 run patchelf(pid=2539): Terminating (SIGINT) 15:55:08.462348 run patchelf(pid=2539): Terminated: ok {rc=0} 15:55:08.494671 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)] [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 15:55:08.504032 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 15:55:08.564097 run osmo-hlr_10.42.42.2(pid=2533): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2533)] 15:55:08.613097 run osmo-hlr_10.42.42.2(pid=2533): stdout: | (launched: 2022-12-13_15:55:05.220671) 15:55:08.662957 run osmo-hlr_10.42.42.2(pid=2533): stderr: | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213155505400 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213155505412 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213155505420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213155505421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213155505421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:55:08.705330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2523): Terminating (SIGTERM) 15:55:08.746372 run iperf3-srv_10.42.42.10(pid=2524): Terminating (SIGTERM) 15:55:08.786312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2528): Terminating (SIGTERM) 15:55:08.825981 run iperf3-srv_10.42.42.10(pid=2529): Terminating (SIGTERM) 15:55:08.865624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Terminating (SIGTERM) 15:55:08.905401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Terminating (SIGTERM) 15:55:08.945319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Terminating (SIGTERM) 15:55:08.954419 --- ParallelTerminationStrategy: PID 2523 died... 15:55:09.007623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2523): Terminated: ok {rc=0} 15:55:09.017106 --- ParallelTerminationStrategy: PID 2524 died... 15:55:09.069741 run iperf3-srv_10.42.42.10(pid=2524): Terminated {rc=256} 15:55:09.079116 --- ParallelTerminationStrategy: PID 2528 died... 15:55:09.131871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2528): Terminated: ok {rc=0} 15:55:09.141290 --- ParallelTerminationStrategy: PID 2529 died... 15:55:09.193802 run iperf3-srv_10.42.42.10(pid=2529): Terminated {rc=256} 15:55:09.203228 --- ParallelTerminationStrategy: PID 2532 died... 15:55:09.255888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2532): Terminated: ok {rc=0} 15:55:09.265359 --- ParallelTerminationStrategy: PID 2535 died... 15:55:09.317944 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2535): Terminated: ok {rc=0} 15:55:09.327380 --- ParallelTerminationStrategy: PID 2538 died... 15:55:09.380147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2538): Terminated: ok {rc=0} 15:55:09.468599 bus /gobi_0: Setting Powered False 15:55:10.571421 bus /gobi_0: Setting Powered False 15:55:11.681787 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2536): Process ended prematurely: osmo-stp_10.42.42.5(pid=2536) [trial-2391↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2536)]