Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3674): Process ended prematurely: osmo-stp_10.42.42.5(pid=3674) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3674)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:03:45.924787 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:45.936274 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:03:46.102880 tst cs_paging_gprs_active.py: using LAC 34709 16:03:46.230173 tst cs_paging_gprs_active.py: using RAC 29 16:03:46.397803 tst cs_paging_gprs_active.py: using CellId 34709 16:03:46.542406 tst cs_paging_gprs_active.py: using BVCI 34710 16:03:46.569448 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.583004 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.595211 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.607322 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.619915 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.632471 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.644602 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.656670 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:03:46.668994 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:03:46.817713 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:03:47.152199 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:03:47.294835 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:03:47.630159 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Launched 16:03:47.907986 run iperf3-srv_10.42.42.10(pid=3665): Launched 16:03:48.101400 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:03:48.234068 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:03:48.565905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3666): Launched 16:03:48.840723 run iperf3-srv_10.42.42.10(pid=3667): Launched 16:03:49.033744 tst cs_paging_gprs_active.py:38: start network... 16:03:49.164710 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:03:49.673401 run create_hlr_db(pid=3668): Launched 16:03:49.854595 bus /gobi_6: Setting Powered False 16:03:50.875909 run create_hlr_db(pid=3668): Terminated: ok {rc=0} 16:03:51.326247 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3670): Launched 16:03:51.667259 run osmo-hlr_10.42.42.2(pid=3671): Launched 16:03:51.794113 run osmo-stp_10.42.42.5: Starting osmo-stp 16:03:52.382495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3673): Launched 16:03:52.724796 run osmo-stp_10.42.42.5(pid=3674): Launched 16:03:52.847057 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:03:53.437032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3676): Launched 16:03:53.557701 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:03:53.855134 run patchelf(pid=3677): Launched 16:03:54.052838 run osmo-stp_10.42.42.5(pid=3674): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3674)] 16:03:54.197808 run osmo-stp_10.42.42.5(pid=3674): stdout: | (launched: 2022-12-13_16:03:52.554744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:03:54.342728 run osmo-stp_10.42.42.5(pid=3674): stderr: | �[0;m�[38;5;43m20221213160352751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160352751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160352752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160352752 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:03:54.483008 run osmo-stp_10.42.42.5(pid=3674): stdout: | (launched: 2022-12-13_16:03:52.554744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:03:54.621673 run osmo-stp_10.42.42.5(pid=3674): stderr: | �[0;m�[38;5;43m20221213160352751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160352751 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160352752 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160352752 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160352753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:03:54.783113 run patchelf(pid=3677): Terminating (SIGINT) 16:03:54.972908 run patchelf(pid=3677): Terminated: ok {rc=0} 16:03:55.007604 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3674): Process ended prematurely: osmo-stp_10.42.42.5(pid=3674) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3674)] [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:03:55.017863 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 16:03:55.082232 run osmo-hlr_10.42.42.2(pid=3671): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3671)] 16:03:55.134521 run osmo-hlr_10.42.42.2(pid=3671): stdout: | (launched: 2022-12-13_16:03:51.498472) 16:03:55.187603 run osmo-hlr_10.42.42.2(pid=3671): stderr: | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213160351702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213160351715 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213160351723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213160351723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213160351724 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:03:55.232931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Terminating (SIGTERM) 16:03:55.275950 run iperf3-srv_10.42.42.10(pid=3665): Terminating (SIGTERM) 16:03:55.318859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3666): Terminating (SIGTERM) 16:03:55.361832 run iperf3-srv_10.42.42.10(pid=3667): Terminating (SIGTERM) 16:03:55.404573 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3670): Terminating (SIGTERM) 16:03:55.447843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3673): Terminating (SIGTERM) 16:03:55.490918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3676): Terminating (SIGTERM) 16:03:55.500593 --- ParallelTerminationStrategy: PID 3664 died... 16:03:55.557598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3664): Terminated: ok {rc=0} 16:03:55.567737 --- ParallelTerminationStrategy: PID 3665 died... 16:03:55.624319 run iperf3-srv_10.42.42.10(pid=3665): Terminated {rc=256} 16:03:55.634367 --- ParallelTerminationStrategy: PID 3666 died... 16:03:55.691072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3666): Terminated: ok {rc=0} 16:03:55.701194 --- ParallelTerminationStrategy: PID 3667 died... 16:03:55.757577 run iperf3-srv_10.42.42.10(pid=3667): Terminated {rc=256} 16:03:55.767550 --- ParallelTerminationStrategy: PID 3670 died... 16:03:55.823845 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3670): Terminated: ok {rc=0} 16:03:55.833870 --- ParallelTerminationStrategy: PID 3673 died... 16:03:55.890401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3673): Terminated: ok {rc=0} 16:03:55.900428 --- ParallelTerminationStrategy: PID 3676 died... 16:03:55.957325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3676): Terminated: ok {rc=0} 16:03:56.045548 bus /gobi_0: Setting Powered False 16:03:57.153466 bus /gobi_0: Setting Powered False 16:03:58.266470 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3674): Process ended prematurely: osmo-stp_10.42.42.5(pid=3674) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3674)]