Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3538): Process ended prematurely: osmo-stp_10.42.42.5(pid=3538) [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3538)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:01:42.429381 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:42.440609 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:01:42.585901 tst cs_paging_gprs_active.py: using LAC 34699 16:01:42.711684 tst cs_paging_gprs_active.py: using RAC 19 16:01:42.837409 tst cs_paging_gprs_active.py: using CellId 34699 16:01:42.960604 tst cs_paging_gprs_active.py: using BVCI 34700 16:01:42.984864 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:42.995821 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.006621 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.017400 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.028353 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.039394 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.050722 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.061410 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:01:43.072075 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:01:43.197015 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:01:43.486853 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:01:43.618687 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:43.949125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3528): Launched 16:01:44.225210 run iperf3-srv_10.42.42.10(pid=3529): Launched 16:01:44.418062 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:01:44.549338 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:01:44.879063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3530): Launched 16:01:45.152364 run iperf3-srv_10.42.42.10(pid=3531): Launched 16:01:45.344027 tst cs_paging_gprs_active.py:38: start network... 16:01:45.474973 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:01:45.996724 run create_hlr_db(pid=3532): Launched 16:01:46.200849 bus /gobi_6: Setting Powered False 16:01:47.218042 run create_hlr_db(pid=3532): Terminated: ok {rc=0} 16:01:47.669987 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3534): Launched 16:01:48.010552 run osmo-hlr_10.42.42.2(pid=3535): Launched 16:01:48.135469 run osmo-stp_10.42.42.5: Starting osmo-stp 16:01:48.723811 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3537): Launched 16:01:49.064830 run osmo-stp_10.42.42.5(pid=3538): Launched 16:01:49.190090 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:01:49.778701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3540): Launched 16:01:49.899050 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:01:50.197209 run patchelf(pid=3541): Launched 16:01:50.395216 run osmo-stp_10.42.42.5(pid=3538): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3538)] 16:01:50.539579 run osmo-stp_10.42.42.5(pid=3538): stdout: | (launched: 2022-12-13_16:01:48.895402) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:50.683838 run osmo-stp_10.42.42.5(pid=3538): stderr: | �[0;m�[38;5;43m20221213160149091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160149091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160149092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160149092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160149092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160149093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160149093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:50.822735 run osmo-stp_10.42.42.5(pid=3538): stdout: | (launched: 2022-12-13_16:01:48.895402) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:01:50.960247 run osmo-stp_10.42.42.5(pid=3538): stderr: | �[0;m�[38;5;43m20221213160149091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160149091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160149092 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160149092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160149092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160149093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160149093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:01:51.121890 run patchelf(pid=3541): Terminating (SIGINT) 16:01:51.311465 run patchelf(pid=3541): Terminated: ok {rc=0} 16:01:51.346071 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3538): Process ended prematurely: osmo-stp_10.42.42.5(pid=3538) [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3538)] [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:01:51.356090 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:01:51.420703 run osmo-hlr_10.42.42.2(pid=3535): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3535)] 16:01:51.473094 run osmo-hlr_10.42.42.2(pid=3535): stdout: | (launched: 2022-12-13_16:01:47.841369) 16:01:51.526024 run osmo-hlr_10.42.42.2(pid=3535): stderr: | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213160148044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213160148056 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213160148065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213160148065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213160148065 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:01:51.571695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3528): Terminating (SIGTERM) 16:01:51.614656 run iperf3-srv_10.42.42.10(pid=3529): Terminating (SIGTERM) 16:01:51.657450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3530): Terminating (SIGTERM) 16:01:51.700334 run iperf3-srv_10.42.42.10(pid=3531): Terminating (SIGTERM) 16:01:51.742915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3534): Terminating (SIGTERM) 16:01:51.786054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3537): Terminating (SIGTERM) 16:01:51.829050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3540): Terminating (SIGTERM) 16:01:51.838798 --- ParallelTerminationStrategy: PID 3528 died... 16:01:51.895462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3528): Terminated: ok {rc=0} 16:01:51.905653 --- ParallelTerminationStrategy: PID 3529 died... 16:01:51.961933 run iperf3-srv_10.42.42.10(pid=3529): Terminated {rc=256} 16:01:51.972006 --- ParallelTerminationStrategy: PID 3530 died... 16:01:52.028319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3530): Terminated: ok {rc=0} 16:01:52.038402 --- ParallelTerminationStrategy: PID 3531 died... 16:01:52.094641 run iperf3-srv_10.42.42.10(pid=3531): Terminated {rc=256} 16:01:52.104710 --- ParallelTerminationStrategy: PID 3534 died... 16:01:52.161107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3534): Terminated: ok {rc=0} 16:01:52.171295 --- ParallelTerminationStrategy: PID 3537 died... 16:01:52.227812 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3537): Terminated: ok {rc=0} 16:01:52.237996 --- ParallelTerminationStrategy: PID 3540 died... 16:01:52.294620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3540): Terminated: ok {rc=0} 16:01:52.382673 bus /gobi_0: Setting Powered False 16:01:53.485561 bus /gobi_0: Setting Powered False 16:01:54.593866 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3538): Process ended prematurely: osmo-stp_10.42.42.5(pid=3538) [trial-2391↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3538)]