Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4563): Process ended prematurely: osmo-stp_10.42.42.5(pid=4563) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4563)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 16:12:48.466485 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:48.478105 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:12:48.648943 tst cs_paging_gprs_active.py: using LAC 34756 16:12:48.780444 tst cs_paging_gprs_active.py: using RAC 76 16:12:48.916367 tst cs_paging_gprs_active.py: using CellId 34756 16:12:49.044293 tst cs_paging_gprs_active.py: using BVCI 34757 16:12:49.069771 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.081485 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.092927 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.104412 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.116217 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.127896 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.139762 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.151384 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:12:49.163420 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:12:49.286180 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:12:49.590277 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:12:49.730067 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:12:50.077281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4553): Launched 16:12:50.367519 run iperf3-srv_10.42.42.10(pid=4554): Launched 16:12:50.572342 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:12:50.712520 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:12:51.059882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4555): Launched 16:12:51.348912 run iperf3-srv_10.42.42.10(pid=4556): Launched 16:12:51.554558 tst cs_paging_gprs_active.py:38: start network... 16:12:51.694584 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:12:52.220765 run create_hlr_db(pid=4557): Launched 16:12:52.413313 bus /gobi_6: Setting Powered False 16:12:53.434051 run create_hlr_db(pid=4557): Terminated: ok {rc=0} 16:12:53.855766 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4559): Launched 16:12:54.170796 run osmo-hlr_10.42.42.2(pid=4560): Launched 16:12:54.285513 run osmo-stp_10.42.42.5: Starting osmo-stp 16:12:54.829185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4562): Launched 16:12:55.145502 run osmo-stp_10.42.42.5(pid=4563): Launched 16:12:55.260759 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:12:55.808155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4565): Launched 16:12:55.919284 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:12:56.194930 run patchelf(pid=4566): Launched 16:12:56.377472 run osmo-stp_10.42.42.5(pid=4563): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4563)] 16:12:56.510750 run osmo-stp_10.42.42.5(pid=4563): stdout: | (launched: 2022-12-13_16:12:54.988221) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:12:56.644487 run osmo-stp_10.42.42.5(pid=4563): stderr: | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161255161 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:12:56.773236 run osmo-stp_10.42.42.5(pid=4563): stdout: | (launched: 2022-12-13_16:12:54.988221) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:12:56.900169 run osmo-stp_10.42.42.5(pid=4563): stderr: | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161255160 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161255161 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161255161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:12:57.049835 run patchelf(pid=4566): Terminating (SIGINT) 16:12:57.225982 run patchelf(pid=4566): Terminated: ok {rc=0} 16:12:57.258591 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4563): Process ended prematurely: osmo-stp_10.42.42.5(pid=4563) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4563)] [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 16:12:57.268094 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 16:12:57.328658 run osmo-hlr_10.42.42.2(pid=4560): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4560)] 16:12:57.378172 run osmo-hlr_10.42.42.2(pid=4560): stdout: | (launched: 2022-12-13_16:12:54.015474) 16:12:57.428507 run osmo-hlr_10.42.42.2(pid=4560): stderr: | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213161254194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213161254206 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213161254215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213161254215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213161254215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:12:57.471478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4553): Terminating (SIGTERM) 16:12:57.511821 run iperf3-srv_10.42.42.10(pid=4554): Terminating (SIGTERM) 16:12:57.551967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4555): Terminating (SIGTERM) 16:12:57.592120 run iperf3-srv_10.42.42.10(pid=4556): Terminating (SIGTERM) 16:12:57.632240 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4559): Terminating (SIGTERM) 16:12:57.672412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4562): Terminating (SIGTERM) 16:12:57.712694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4565): Terminating (SIGTERM) 16:12:57.722004 --- ParallelTerminationStrategy: PID 4553 died... 16:12:57.775824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4553): Terminated: ok {rc=0} 16:12:57.785592 --- ParallelTerminationStrategy: PID 4554 died... 16:12:57.838864 run iperf3-srv_10.42.42.10(pid=4554): Terminated {rc=256} 16:12:57.848726 --- ParallelTerminationStrategy: PID 4555 died... 16:12:57.901893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4555): Terminated: ok {rc=0} 16:12:57.911430 --- ParallelTerminationStrategy: PID 4556 died... 16:12:57.964402 run iperf3-srv_10.42.42.10(pid=4556): Terminated {rc=256} 16:12:57.973892 --- ParallelTerminationStrategy: PID 4559 died... 16:12:58.027253 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4559): Terminated: ok {rc=0} 16:12:58.036915 --- ParallelTerminationStrategy: PID 4562 died... 16:12:58.090487 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4562): Terminated: ok {rc=0} 16:12:58.100159 --- ParallelTerminationStrategy: PID 4565 died... 16:12:58.153221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4565): Terminated: ok {rc=0} 16:12:58.240809 bus /gobi_0: Setting Powered False 16:12:59.343985 bus /gobi_0: Setting Powered False 16:13:00.455527 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4563): Process ended prematurely: osmo-stp_10.42.42.5(pid=4563) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4563)]