Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4429): Process ended prematurely: osmo-stp_10.42.42.5(pid=4429) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4429)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:10:46.213061 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.225407 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:10:46.411920 tst cs_paging_gprs_active.py: using LAC 34746 16:10:46.582817 tst cs_paging_gprs_active.py: using RAC 66 16:10:46.727680 tst cs_paging_gprs_active.py: using CellId 34746 16:10:46.861620 tst cs_paging_gprs_active.py: using BVCI 34747 16:10:46.888487 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.901055 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.913417 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.926012 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.939497 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.953863 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.966936 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.980010 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:10:46.993589 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:10:47.119514 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:10:47.422320 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:10:47.552265 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:10:47.877499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4419): Launched 16:10:48.147674 run iperf3-srv_10.42.42.10(pid=4420): Launched 16:10:48.339202 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:10:48.469291 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:10:48.794291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4421): Launched 16:10:49.064111 run iperf3-srv_10.42.42.10(pid=4422): Launched 16:10:49.254520 tst cs_paging_gprs_active.py:38: start network... 16:10:49.384624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:10:49.887262 run create_hlr_db(pid=4423): Launched 16:10:50.066507 bus /gobi_6: Setting Powered False 16:10:51.088114 run create_hlr_db(pid=4423): Terminated: ok {rc=0} 16:10:51.535182 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4425): Launched 16:10:51.875661 run osmo-hlr_10.42.42.2(pid=4426): Launched 16:10:52.003508 run osmo-stp_10.42.42.5: Starting osmo-stp 16:10:52.589787 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4428): Launched 16:10:52.927067 run osmo-stp_10.42.42.5(pid=4429): Launched 16:10:53.047951 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:10:53.631607 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4431): Launched 16:10:53.751196 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:10:54.045440 run patchelf(pid=4432): Launched 16:10:54.240682 run osmo-stp_10.42.42.5(pid=4429): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4429)] 16:10:54.383801 run osmo-stp_10.42.42.5(pid=4429): stdout: | (launched: 2022-12-13_16:10:52.760546) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:10:54.527301 run osmo-stp_10.42.42.5(pid=4429): stderr: | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161052953 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161052953 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161052953 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161052954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:10:54.665800 run osmo-stp_10.42.42.5(pid=4429): stdout: | (launched: 2022-12-13_16:10:52.760546) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:10:54.802594 run osmo-stp_10.42.42.5(pid=4429): stderr: | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161052952 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161052953 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161052953 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161052953 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161052954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:10:54.962141 run patchelf(pid=4432): Terminating (SIGINT) 16:10:55.149510 run patchelf(pid=4432): Terminated: ok {rc=0} 16:10:55.183690 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4429): Process ended prematurely: osmo-stp_10.42.42.5(pid=4429) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4429)] [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:10:55.193844 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:10:55.257856 run osmo-hlr_10.42.42.2(pid=4426): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4426)] 16:10:55.310190 run osmo-hlr_10.42.42.2(pid=4426): stdout: | (launched: 2022-12-13_16:10:51.706286) 16:10:55.363066 run osmo-hlr_10.42.42.2(pid=4426): stderr: | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213161051911 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213161051924 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213161051935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213161051936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213161051936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:10:55.408266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4419): Terminating (SIGTERM) 16:10:55.450948 run iperf3-srv_10.42.42.10(pid=4420): Terminating (SIGTERM) 16:10:55.493721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4421): Terminating (SIGTERM) 16:10:55.536212 run iperf3-srv_10.42.42.10(pid=4422): Terminating (SIGTERM) 16:10:55.579028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4425): Terminating (SIGTERM) 16:10:55.621672 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4428): Terminating (SIGTERM) 16:10:55.664813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4431): Terminating (SIGTERM) 16:10:55.674270 --- ParallelTerminationStrategy: PID 4419 died... 16:10:55.731479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4419): Terminated: ok {rc=0} 16:10:55.741664 --- ParallelTerminationStrategy: PID 4420 died... 16:10:55.798523 run iperf3-srv_10.42.42.10(pid=4420): Terminated {rc=256} 16:10:55.808630 --- ParallelTerminationStrategy: PID 4421 died... 16:10:55.865582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4421): Terminated: ok {rc=0} 16:10:55.875689 --- ParallelTerminationStrategy: PID 4422 died... 16:10:55.932340 run iperf3-srv_10.42.42.10(pid=4422): Terminated {rc=256} 16:10:55.942431 --- ParallelTerminationStrategy: PID 4425 died... 16:10:55.999241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4425): Terminated: ok {rc=0} 16:10:56.009747 --- ParallelTerminationStrategy: PID 4428 died... 16:10:56.066637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4428): Terminated: ok {rc=0} 16:10:56.076704 --- ParallelTerminationStrategy: PID 4431 died... 16:10:56.133577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4431): Terminated: ok {rc=0} 16:10:56.222579 bus /gobi_0: Setting Powered False 16:10:57.330233 bus /gobi_0: Setting Powered False 16:10:58.440515 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4429): Process ended prematurely: osmo-stp_10.42.42.5(pid=4429) [trial-2391↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4429)]