Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5007): Process ended prematurely: osmo-stp_10.42.42.5(pid=5007) [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5007)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 16:19:07.300185 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.311156 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 16:19:07.469332 tst cs_paging_gprs_active.py: using LAC 34790 16:19:07.613222 tst cs_paging_gprs_active.py: using RAC 110 16:19:07.746676 tst cs_paging_gprs_active.py: using CellId 34790 16:19:07.878827 tst cs_paging_gprs_active.py: using BVCI 34791 16:19:07.905108 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.916608 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.928257 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.939705 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.951648 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.963603 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.975775 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.987602 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 16:19:07.999625 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:19:08.120158 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 16:19:08.426513 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:19:08.568019 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:19:08.919465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4997): Launched 16:19:09.212642 run iperf3-srv_10.42.42.10(pid=4998): Launched 16:19:09.420499 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:19:09.562085 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:19:09.915380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4999): Launched 16:19:10.208655 run iperf3-srv_10.42.42.10(pid=5000): Launched 16:19:10.416281 tst cs_paging_gprs_active.py:38: start network... 16:19:10.557712 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:19:11.091528 run create_hlr_db(pid=5001): Launched 16:19:11.286568 bus /gobi_6: Setting Powered False 16:19:12.306811 run create_hlr_db(pid=5001): Terminated: ok {rc=0} 16:19:12.732549 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5003): Launched 16:19:13.049910 run osmo-hlr_10.42.42.2(pid=5004): Launched 16:19:13.166537 run osmo-stp_10.42.42.5: Starting osmo-stp 16:19:13.716043 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5006): Launched 16:19:14.033931 run osmo-stp_10.42.42.5(pid=5007): Launched 16:19:14.149257 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:19:14.701580 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5009): Launched 16:19:14.813388 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:19:15.090916 run patchelf(pid=5010): Launched 16:19:15.274785 run osmo-stp_10.42.42.5(pid=5007): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5007)] 16:19:15.409129 run osmo-stp_10.42.42.5(pid=5007): stdout: | (launched: 2022-12-13_16:19:13.875985) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:15.543399 run osmo-stp_10.42.42.5(pid=5007): stderr: | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161914050 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:15.673242 run osmo-stp_10.42.42.5(pid=5007): stdout: | (launched: 2022-12-13_16:19:13.875985) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:19:15.801745 run osmo-stp_10.42.42.5(pid=5007): stderr: | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213161914049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213161914050 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213161914052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:19:15.981789 run patchelf(pid=5010): Terminating (SIGINT) 16:19:16.175928 run patchelf(pid=5010): Terminated: ok {rc=0} 16:19:16.211938 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5007): Process ended prematurely: osmo-stp_10.42.42.5(pid=5007) [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5007)] [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 16:19:16.222882 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 16:19:16.291556 run osmo-hlr_10.42.42.2(pid=5004): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5004)] 16:19:16.346210 run osmo-hlr_10.42.42.2(pid=5004): stdout: | (launched: 2022-12-13_16:19:12.893341) 16:19:16.401779 run osmo-hlr_10.42.42.2(pid=5004): stderr: | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213161913071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213161913084 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213161913092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213161913093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213161913093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:19:16.450247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4997): Terminating (SIGTERM) 16:19:16.495091 run iperf3-srv_10.42.42.10(pid=4998): Terminating (SIGTERM) 16:19:16.540167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4999): Terminating (SIGTERM) 16:19:16.585938 run iperf3-srv_10.42.42.10(pid=5000): Terminating (SIGTERM) 16:19:16.630392 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5003): Terminating (SIGTERM) 16:19:16.678192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5006): Terminating (SIGTERM) 16:19:16.725226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5009): Terminating (SIGTERM) 16:19:16.736316 --- ParallelTerminationStrategy: PID 4997 died... 16:19:16.797476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4997): Terminated: ok {rc=0} 16:19:16.809269 --- ParallelTerminationStrategy: PID 4998 died... 16:19:16.868342 run iperf3-srv_10.42.42.10(pid=4998): Terminated {rc=256} 16:19:16.879817 --- ParallelTerminationStrategy: PID 4999 died... 16:19:16.938504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4999): Terminated: ok {rc=0} 16:19:16.949564 --- ParallelTerminationStrategy: PID 5000 died... 16:19:17.008873 run iperf3-srv_10.42.42.10(pid=5000): Terminated {rc=256} 16:19:17.019987 --- ParallelTerminationStrategy: PID 5003 died... 16:19:17.079839 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5003): Terminated: ok {rc=0} 16:19:17.090883 --- ParallelTerminationStrategy: PID 5006 died... 16:19:17.150099 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5006): Terminated: ok {rc=0} 16:19:17.161581 --- ParallelTerminationStrategy: PID 5009 died... 16:19:17.220593 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5009): Terminated: ok {rc=0} 16:19:17.308577 bus /gobi_0: Setting Powered False 16:19:18.417211 bus /gobi_0: Setting Powered False 16:19:19.526594 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5007): Process ended prematurely: osmo-stp_10.42.42.5(pid=5007) [trial-2391↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5007)]