Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=9635): Process ended prematurely: osmo-stp_10.42.42.5(pid=9635) [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9635)]
Standard Output
---------------------------------------------- trial-2392 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:16:59.572732 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.584062 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:16:59.712089 tst cs_paging_gprs_active.py: using LAC 35072 17:16:59.834659 tst cs_paging_gprs_active.py: using RAC 137 17:16:59.960370 tst cs_paging_gprs_active.py: using CellId 35072 17:17:00.084290 tst cs_paging_gprs_active.py: using BVCI 35073 17:17:00.108373 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.119222 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.129761 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.140245 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.150717 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.161214 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.171859 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.182384 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:17:00.193069 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:17:00.315882 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:17:00.604912 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:17:00.734698 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:17:01.107862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9622): Launched 17:17:01.434880 run iperf3-srv_10.42.42.10(pid=9623): Launched 17:17:01.652699 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:17:01.800489 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:17:02.208921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9627): Launched 17:17:02.501975 run iperf3-srv_10.42.42.10(pid=9628): Launched 17:17:02.708458 tst cs_paging_gprs_active.py:38: start network... 17:17:02.848812 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:17:03.376863 run create_hlr_db(pid=9629): Launched 17:17:03.571372 bus /gobi_6: Setting Powered False 17:17:04.591461 run create_hlr_db(pid=9629): Terminated: ok {rc=0} 17:17:05.014050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9631): Launched 17:17:05.329201 run osmo-hlr_10.42.42.2(pid=9632): Launched 17:17:05.452692 run osmo-stp_10.42.42.5: Starting osmo-stp 17:17:06.004183 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9634): Launched 17:17:06.317934 run osmo-stp_10.42.42.5(pid=9635): Launched 17:17:06.431883 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:17:06.978616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9637): Launched 17:17:07.090130 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:17:07.364683 run patchelf(pid=9638): Launched 17:17:07.547923 run osmo-stp_10.42.42.5(pid=9635): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9635)] 17:17:07.682072 run osmo-stp_10.42.42.5(pid=9635): stdout: | (launched: 2022-12-13_17:17:06.163056) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:07.816706 run osmo-stp_10.42.42.5(pid=9635): stderr: | �[0;m�[38;5;43m20221213171706337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171706337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171706338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171706338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:07.946130 run osmo-stp_10.42.42.5(pid=9635): stdout: | (launched: 2022-12-13_17:17:06.163056) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:08.073924 run osmo-stp_10.42.42.5(pid=9635): stderr: | �[0;m�[38;5;43m20221213171706337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213171706337 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213171706338 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213171706338 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213171706340 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:08.223946 run patchelf(pid=9638): Terminating (SIGINT) 17:17:08.401588 run patchelf(pid=9638): Terminated: ok {rc=0} 17:17:08.433955 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9635): Process ended prematurely: osmo-stp_10.42.42.5(pid=9635) [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9635)] [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:17:08.443178 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:17:08.504038 run osmo-hlr_10.42.42.2(pid=9632): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9632)] 17:17:08.554031 run osmo-hlr_10.42.42.2(pid=9632): stdout: | (launched: 2022-12-13_17:17:05.172932) 17:17:08.604663 run osmo-hlr_10.42.42.2(pid=9632): stderr: | �[0;m�[1;31m20221213171705353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213171705353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213171705354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213171705354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213171705354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213171705354 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213171705366 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213171705374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213171705374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213171705374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:17:08.647746 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9622): Terminating (SIGTERM) 17:17:08.688353 run iperf3-srv_10.42.42.10(pid=9623): Terminating (SIGTERM) 17:17:08.728826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9627): Terminating (SIGTERM) 17:17:08.769407 run iperf3-srv_10.42.42.10(pid=9628): Terminating (SIGTERM) 17:17:08.810917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9631): Terminating (SIGTERM) 17:17:08.851751 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9634): Terminating (SIGTERM) 17:17:08.892908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9637): Terminating (SIGTERM) 17:17:08.902358 --- ParallelTerminationStrategy: PID 9622 died... 17:17:08.957007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9622): Terminated: ok {rc=0} 17:17:08.966792 --- ParallelTerminationStrategy: PID 9623 died... 17:17:09.020499 run iperf3-srv_10.42.42.10(pid=9623): Terminated {rc=256} 17:17:09.030244 --- ParallelTerminationStrategy: PID 9627 died... 17:17:09.084300 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9627): Terminated: ok {rc=0} 17:17:09.094263 --- ParallelTerminationStrategy: PID 9628 died... 17:17:09.147970 run iperf3-srv_10.42.42.10(pid=9628): Terminated {rc=256} 17:17:09.157774 --- ParallelTerminationStrategy: PID 9631 died... 17:17:09.211500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9631): Terminated: ok {rc=0} 17:17:09.221239 --- ParallelTerminationStrategy: PID 9634 died... 17:17:09.275101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9634): Terminated: ok {rc=0} 17:17:09.284852 --- ParallelTerminationStrategy: PID 9637 died... 17:17:09.338763 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9637): Terminated: ok {rc=0} 17:17:09.427761 bus /gobi_0: Setting Powered False 17:17:10.536584 bus /gobi_0: Setting Powered False 17:17:11.650600 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9635): Process ended prematurely: osmo-stp_10.42.42.5(pid=9635) [trial-2392↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9635)]