Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:34:44.521326 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:44.532112 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:34:44.693991 tst cs_paging_gprs_active.py: using LAC 35165 17:34:44.817212 tst cs_paging_gprs_active.py: using RAC 230 17:34:44.940218 tst cs_paging_gprs_active.py: using CellId 35165 17:34:45.064763 tst cs_paging_gprs_active.py: using BVCI 35166 17:34:45.088521 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.099477 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.110192 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.120859 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.131501 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.142253 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.153345 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.164036 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:34:45.174907 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:34:45.300022 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:34:45.587283 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:34:45.716507 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:34:46.088215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11137): Launched 17:34:46.361545 run iperf3-srv_10.42.42.10(pid=11138): Launched 17:34:46.555026 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:34:46.687100 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:34:47.034414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11139): Launched 17:34:47.318358 run iperf3-srv_10.42.42.10(pid=11140): Launched 17:34:47.509371 tst cs_paging_gprs_active.py:38: start network... 17:34:47.639089 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:34:48.139734 run create_hlr_db(pid=11141): Launched 17:34:48.320201 bus /gobi_6: Setting Powered False 17:34:49.341179 run create_hlr_db(pid=11141): Terminated: ok {rc=0} 17:34:49.786318 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Launched 17:34:50.121390 run osmo-hlr_10.42.42.2(pid=11144): Launched 17:34:50.247879 run osmo-stp_10.42.42.5: Starting osmo-stp 17:34:50.831493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Launched 17:34:51.165154 run osmo-stp_10.42.42.5(pid=11147): Launched 17:34:51.286251 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:34:51.869294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Launched 17:34:51.989486 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:34:52.282810 run patchelf(pid=11150): Launched 17:34:52.479132 run osmo-stp_10.42.42.5(pid=11147): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)] 17:34:52.622899 run osmo-stp_10.42.42.5(pid=11147): stdout: | (launched: 2022-12-13_17:34:51.001422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:34:52.766752 run osmo-stp_10.42.42.5(pid=11147): stderr: | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173451191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:34:52.905846 run osmo-stp_10.42.42.5(pid=11147): stdout: | (launched: 2022-12-13_17:34:51.001422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:34:53.043498 run osmo-stp_10.42.42.5(pid=11147): stderr: | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173451191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173451191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173451192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:34:53.205503 run patchelf(pid=11150): Terminating (SIGINT) 17:34:53.395004 run patchelf(pid=11150): Terminated: ok {rc=0} 17:34:53.429598 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)] [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:34:53.439567 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 17:34:53.505173 run osmo-hlr_10.42.42.2(pid=11144): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11144)] 17:34:53.559206 run osmo-hlr_10.42.42.2(pid=11144): stdout: | (launched: 2022-12-13_17:34:49.956083) 17:34:53.613191 run osmo-hlr_10.42.42.2(pid=11144): stderr: | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173450151 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173450163 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173450171 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173450172 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173450172 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:34:53.659542 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11137): Terminating (SIGTERM) 17:34:53.703472 run iperf3-srv_10.42.42.10(pid=11138): Terminating (SIGTERM) 17:34:53.746999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11139): Terminating (SIGTERM) 17:34:53.790463 run iperf3-srv_10.42.42.10(pid=11140): Terminating (SIGTERM) 17:34:53.833849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Terminating (SIGTERM) 17:34:53.877257 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Terminating (SIGTERM) 17:34:53.920510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Terminating (SIGTERM) 17:34:53.930084 --- ParallelTerminationStrategy: PID 11137 died... 17:34:53.987999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11137): Terminated: ok {rc=0} 17:34:53.998266 --- ParallelTerminationStrategy: PID 11138 died... 17:34:54.055840 run iperf3-srv_10.42.42.10(pid=11138): Terminated {rc=256} 17:34:54.066145 --- ParallelTerminationStrategy: PID 11139 died... 17:34:54.124233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11139): Terminated: ok {rc=0} 17:34:54.134494 --- ParallelTerminationStrategy: PID 11140 died... 17:34:54.192657 run iperf3-srv_10.42.42.10(pid=11140): Terminated {rc=256} 17:34:54.203216 --- ParallelTerminationStrategy: PID 11143 died... 17:34:54.261663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11143): Terminated: ok {rc=0} 17:34:54.272165 --- ParallelTerminationStrategy: PID 11146 died... 17:34:54.330428 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11146): Terminated: ok {rc=0} 17:34:54.340824 --- ParallelTerminationStrategy: PID 11149 died... 17:34:54.398750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11149): Terminated: ok {rc=0} 17:34:54.487192 bus /gobi_0: Setting Powered False 17:34:55.596675 bus /gobi_0: Setting Powered False 17:34:56.707229 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11147): Process ended prematurely: osmo-stp_10.42.42.5(pid=11147) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11147)]