Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19658): Process ended prematurely: osmo-stp_10.42.42.5(pid=19658) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19658)]
Standard Output
---------------------------------------------- trial-2393 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:54:21.406212 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.417219 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:54:21.562526 tst cs_paging_gprs_active.py: using LAC 35580 18:54:21.681237 tst cs_paging_gprs_active.py: using RAC 135 18:54:21.800086 tst cs_paging_gprs_active.py: using CellId 35580 18:54:21.919016 tst cs_paging_gprs_active.py: using BVCI 35581 18:54:21.942479 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.953426 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.964011 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.974670 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.985844 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:21.997149 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:22.008018 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:22.018802 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:22.029789 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:54:22.152497 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:54:22.435227 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:54:22.563350 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:22.880761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19648): Launched 18:54:23.144699 run iperf3-srv_10.42.42.10(pid=19649): Launched 18:54:23.332262 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:54:23.460297 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:23.777405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19650): Launched 18:54:24.040782 run iperf3-srv_10.42.42.10(pid=19651): Launched 18:54:24.229098 tst cs_paging_gprs_active.py:38: start network... 18:54:24.356885 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:24.847250 run create_hlr_db(pid=19652): Launched 18:54:25.022796 bus /gobi_6: Setting Powered False 18:54:26.045522 run create_hlr_db(pid=19652): Terminated: ok {rc=0} 18:54:26.480153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19654): Launched 18:54:26.810383 run osmo-hlr_10.42.42.2(pid=19655): Launched 18:54:26.931667 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:27.501056 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19657): Launched 18:54:27.829892 run osmo-stp_10.42.42.5(pid=19658): Launched 18:54:27.948929 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:28.519355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19660): Launched 18:54:28.636345 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:28.921458 run patchelf(pid=19661): Launched 18:54:29.112781 run osmo-stp_10.42.42.5(pid=19658): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19658)] 18:54:29.252441 run osmo-stp_10.42.42.5(pid=19658): stdout: | (launched: 2022-12-13_18:54:27.667969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:29.392609 run osmo-stp_10.42.42.5(pid=19658): stderr: | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185427856 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:29.528234 run osmo-stp_10.42.42.5(pid=19658): stdout: | (launched: 2022-12-13_18:54:27.667969) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:29.662494 run osmo-stp_10.42.42.5(pid=19658): stderr: | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185427855 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185427856 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185427856 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:29.818847 run patchelf(pid=19661): Terminating (SIGINT) 18:54:30.002402 run patchelf(pid=19661): Terminated: ok {rc=0} 18:54:30.036001 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19658): Process ended prematurely: osmo-stp_10.42.42.5(pid=19658) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19658)] [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:54:30.045868 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:54:30.109513 run osmo-hlr_10.42.42.2(pid=19655): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19655)] 18:54:30.161570 run osmo-hlr_10.42.42.2(pid=19655): stdout: | (launched: 2022-12-13_18:54:26.647679) 18:54:30.214288 run osmo-hlr_10.42.42.2(pid=19655): stderr: | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213185426843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213185426855 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213185426863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213185426864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213185426864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:30.259237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19648): Terminating (SIGTERM) 18:54:30.301743 run iperf3-srv_10.42.42.10(pid=19649): Terminating (SIGTERM) 18:54:30.343735 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19650): Terminating (SIGTERM) 18:54:30.385801 run iperf3-srv_10.42.42.10(pid=19651): Terminating (SIGTERM) 18:54:30.428070 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19654): Terminating (SIGTERM) 18:54:30.470267 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19657): Terminating (SIGTERM) 18:54:30.512750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19660): Terminating (SIGTERM) 18:54:30.522397 --- ParallelTerminationStrategy: PID 19648 died... 18:54:30.578862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19648): Terminated: ok {rc=0} 18:54:30.588763 --- ParallelTerminationStrategy: PID 19649 died... 18:54:30.644409 run iperf3-srv_10.42.42.10(pid=19649): Terminated {rc=256} 18:54:30.654258 --- ParallelTerminationStrategy: PID 19650 died... 18:54:30.710049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19650): Terminated: ok {rc=0} 18:54:30.720257 --- ParallelTerminationStrategy: PID 19651 died... 18:54:30.776000 run iperf3-srv_10.42.42.10(pid=19651): Terminated {rc=256} 18:54:30.785895 --- ParallelTerminationStrategy: PID 19654 died... 18:54:30.842152 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19654): Terminated: ok {rc=0} 18:54:30.853159 --- ParallelTerminationStrategy: PID 19657 died... 18:54:30.923934 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19657): Terminated: ok {rc=0} 18:54:30.934545 --- ParallelTerminationStrategy: PID 19660 died... 18:54:30.991071 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19660): Terminated: ok {rc=0} 18:54:31.080937 bus /gobi_0: Setting Powered False 18:54:32.186696 bus /gobi_0: Setting Powered False 18:54:33.297991 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19658): Process ended prematurely: osmo-stp_10.42.42.5(pid=19658) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19658)]