Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19317): Process ended prematurely: osmo-stp_10.42.42.5(pid=19317) [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19317)]
Standard Output
---------------------------------------------- trial-2393 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:53:19.374476 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.385343 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:53:19.517399 tst cs_paging_gprs_active.py: using LAC 35575 18:53:19.644654 tst cs_paging_gprs_active.py: using RAC 130 18:53:19.772727 tst cs_paging_gprs_active.py: using CellId 35575 18:53:19.899286 tst cs_paging_gprs_active.py: using BVCI 35576 18:53:19.924185 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.936050 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.947369 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.958483 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.969887 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.981228 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:19.992900 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:20.004349 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:53:20.016029 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:53:20.134734 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:53:20.415311 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:53:20.542061 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:53:20.855549 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19307): Launched 18:53:21.115765 run iperf3-srv_10.42.42.10(pid=19308): Launched 18:53:21.300049 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:53:21.425540 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:53:21.739836 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Launched 18:53:22.000491 run iperf3-srv_10.42.42.10(pid=19310): Launched 18:53:22.185239 tst cs_paging_gprs_active.py:38: start network... 18:53:22.311152 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:53:22.801061 run create_hlr_db(pid=19311): Launched 18:53:22.989697 bus /gobi_6: Setting Powered False 18:53:24.011413 run create_hlr_db(pid=19311): Terminated: ok {rc=0} 18:53:24.444033 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19313): Launched 18:53:24.771409 run osmo-hlr_10.42.42.2(pid=19314): Launched 18:53:24.891872 run osmo-stp_10.42.42.5: Starting osmo-stp 18:53:25.458401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19316): Launched 18:53:25.785914 run osmo-stp_10.42.42.5(pid=19317): Launched 18:53:25.904488 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:53:26.472573 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19319): Launched 18:53:26.590308 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:53:26.873881 run patchelf(pid=19320): Launched 18:53:27.064046 run osmo-stp_10.42.42.5(pid=19317): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19317)] 18:53:27.203365 run osmo-stp_10.42.42.5(pid=19317): stdout: | (launched: 2022-12-13_18:53:25.624936) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:27.343490 run osmo-stp_10.42.42.5(pid=19317): stderr: | �[0;m�[38;5;43m20221213185325815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185325816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185325816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185325816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:27.478502 run osmo-stp_10.42.42.5(pid=19317): stdout: | (launched: 2022-12-13_18:53:25.624936) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:27.612714 run osmo-stp_10.42.42.5(pid=19317): stderr: | �[0;m�[38;5;43m20221213185325815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185325816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185325816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185325816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185325817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:27.768494 run patchelf(pid=19320): Terminating (SIGINT) 18:53:27.950957 run patchelf(pid=19320): Terminated: ok {rc=0} 18:53:27.984344 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19317): Process ended prematurely: osmo-stp_10.42.42.5(pid=19317) [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19317)] [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:53:27.994435 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:53:28.058470 run osmo-hlr_10.42.42.2(pid=19314): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19314)] 18:53:28.110745 run osmo-hlr_10.42.42.2(pid=19314): stdout: | (launched: 2022-12-13_18:53:24.610533) 18:53:28.163911 run osmo-hlr_10.42.42.2(pid=19314): stderr: | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213185324808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213185324823 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213185324833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213185324833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213185324833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:53:28.209333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19307): Terminating (SIGTERM) 18:53:28.251845 run iperf3-srv_10.42.42.10(pid=19308): Terminating (SIGTERM) 18:53:28.294455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Terminating (SIGTERM) 18:53:28.337025 run iperf3-srv_10.42.42.10(pid=19310): Terminating (SIGTERM) 18:53:28.379923 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19313): Terminating (SIGTERM) 18:53:28.422506 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19316): Terminating (SIGTERM) 18:53:28.465054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19319): Terminating (SIGTERM) 18:53:28.474782 --- ParallelTerminationStrategy: PID 19307 died... 18:53:28.532349 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19307): Terminated: ok {rc=0} 18:53:28.542649 --- ParallelTerminationStrategy: PID 19308 died... 18:53:28.599385 run iperf3-srv_10.42.42.10(pid=19308): Terminated {rc=256} 18:53:28.609420 --- ParallelTerminationStrategy: PID 19309 died... 18:53:28.666145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19309): Terminated: ok {rc=0} 18:53:28.676182 --- ParallelTerminationStrategy: PID 19310 died... 18:53:28.732784 run iperf3-srv_10.42.42.10(pid=19310): Terminated {rc=256} 18:53:28.742950 --- ParallelTerminationStrategy: PID 19313 died... 18:53:28.799542 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19313): Terminated: ok {rc=0} 18:53:28.810036 --- ParallelTerminationStrategy: PID 19316 died... 18:53:28.866828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19316): Terminated: ok {rc=0} 18:53:28.876910 --- ParallelTerminationStrategy: PID 19319 died... 18:53:28.933941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19319): Terminated: ok {rc=0} 18:53:29.021567 bus /gobi_0: Setting Powered False 18:53:30.129146 bus /gobi_0: Setting Powered False 18:53:31.241925 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19317): Process ended prematurely: osmo-stp_10.42.42.5(pid=19317) [trial-2393↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19317)]