Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18890): Process ended prematurely: osmo-stp_10.42.42.5(pid=18890) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18890)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 18:47:16.195734 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.208888 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:47:16.370389 tst ping_idle_ping.py: using LAC 35542 18:47:16.532757 tst ping_idle_ping.py: using RAC 97 18:47:16.670131 tst ping_idle_ping.py: using CellId 35542 18:47:16.798903 tst ping_idle_ping.py: using BVCI 35543 18:47:16.823508 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.835469 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.847027 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.858737 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.870232 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.881596 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.893472 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:47:16.904914 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:47:17.181856 tst ping_idle_ping.py:24: start network... 18:47:17.310450 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:47:17.826172 run create_hlr_db(pid=18884): Launched 18:47:18.014545 bus /gobi_6: Setting Powered False 18:47:19.035238 run create_hlr_db(pid=18884): Terminated: ok {rc=0} 18:47:19.440236 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18886): Launched 18:47:19.745101 run osmo-hlr_10.42.42.2(pid=18887): Launched 18:47:19.856334 run osmo-stp_10.42.42.5: Starting osmo-stp 18:47:20.379149 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18889): Launched 18:47:20.680329 run osmo-stp_10.42.42.5(pid=18890): Launched 18:47:20.790000 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:47:21.316622 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18892): Launched 18:47:21.423535 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:47:21.685764 run patchelf(pid=18893): Launched 18:47:21.861382 run osmo-stp_10.42.42.5(pid=18890): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18890)] 18:47:21.990610 run osmo-stp_10.42.42.5(pid=18890): stdout: | (launched: 2022-12-13_18:47:20.532284) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:22.119457 run osmo-stp_10.42.42.5(pid=18890): stderr: | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184720703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:22.243891 run osmo-stp_10.42.42.5(pid=18890): stdout: | (launched: 2022-12-13_18:47:20.532284) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:22.367445 run osmo-stp_10.42.42.5(pid=18890): stderr: | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184720703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184720703 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184720704 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:22.510944 run patchelf(pid=18893): Terminating (SIGINT) 18:47:22.679221 run patchelf(pid=18893): Terminated: ok {rc=0} 18:47:22.710098 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18890): Process ended prematurely: osmo-stp_10.42.42.5(pid=18890) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18890)] [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 18:47:22.718747 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 18:47:22.779374 run osmo-hlr_10.42.42.2(pid=18887): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18887)] 18:47:22.829149 run osmo-hlr_10.42.42.2(pid=18887): stdout: | (launched: 2022-12-13_18:47:19.594773) 18:47:22.879406 run osmo-hlr_10.42.42.2(pid=18887): stderr: | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184719770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184719781 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184719789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184719790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184719790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:47:22.921961 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18886): Terminating (SIGTERM) 18:47:22.961921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18889): Terminating (SIGTERM) 18:47:23.002116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18892): Terminating (SIGTERM) 18:47:23.011408 --- ParallelTerminationStrategy: PID 18886 died... 18:47:23.065239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18886): Terminated: ok {rc=0} 18:47:23.074933 --- ParallelTerminationStrategy: PID 18889 died... 18:47:23.128531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18889): Terminated: ok {rc=0} 18:47:23.138288 --- ParallelTerminationStrategy: PID 18892 died... 18:47:23.191512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18892): Terminated: ok {rc=0} 18:47:23.275616 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18890): Process ended prematurely: osmo-stp_10.42.42.5(pid=18890) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18890)]