Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22561): Process ended prematurely: osmo-stp_10.42.42.5(pid=22561) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22561)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:28:05.027228 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.038272 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:28:05.182156 tst cs_paging_gprs_active.py: using LAC 35759 19:28:05.308429 tst cs_paging_gprs_active.py: using RAC 59 19:28:05.435354 tst cs_paging_gprs_active.py: using CellId 35759 19:28:05.561644 tst cs_paging_gprs_active.py: using BVCI 35760 19:28:05.586917 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.598526 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.609889 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.621240 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.632645 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.644095 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.655784 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.667195 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:05.679049 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:28:05.795950 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:28:06.094258 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:28:06.232858 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:28:06.573872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22551): Launched 19:28:06.856616 run iperf3-srv_10.42.42.10(pid=22552): Launched 19:28:07.059264 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:28:07.196840 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:28:07.539054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22553): Launched 19:28:07.822743 run iperf3-srv_10.42.42.10(pid=22554): Launched 19:28:08.024578 tst cs_paging_gprs_active.py:38: start network... 19:28:08.162200 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:28:08.678112 run create_hlr_db(pid=22555): Launched 19:28:08.867545 bus /gobi_6: Setting Powered False 19:28:09.888597 run create_hlr_db(pid=22555): Terminated: ok {rc=0} 19:28:10.325245 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22557): Launched 19:28:10.656030 run osmo-hlr_10.42.42.2(pid=22558): Launched 19:28:10.777489 run osmo-stp_10.42.42.5: Starting osmo-stp 19:28:11.346722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22560): Launched 19:28:11.676448 run osmo-stp_10.42.42.5(pid=22561): Launched 19:28:11.796007 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:28:12.365862 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22563): Launched 19:28:12.482734 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:28:12.769224 run patchelf(pid=22564): Launched 19:28:12.962526 run osmo-stp_10.42.42.5(pid=22561): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22561)] 19:28:13.103020 run osmo-stp_10.42.42.5(pid=22561): stdout: | (launched: 2022-12-13_19:28:11.513163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:28:13.243461 run osmo-stp_10.42.42.5(pid=22561): stderr: | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192811706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:28:13.379257 run osmo-stp_10.42.42.5(pid=22561): stdout: | (launched: 2022-12-13_19:28:11.513163) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:28:13.513691 run osmo-stp_10.42.42.5(pid=22561): stderr: | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192811705 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192811706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192811706 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:28:13.670849 run patchelf(pid=22564): Terminating (SIGINT) 19:28:13.854122 run patchelf(pid=22564): Terminated: ok {rc=0} 19:28:13.887642 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22561): Process ended prematurely: osmo-stp_10.42.42.5(pid=22561) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22561)] [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:28:13.897581 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:28:13.961367 run osmo-hlr_10.42.42.2(pid=22558): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22558)] 19:28:14.013286 run osmo-hlr_10.42.42.2(pid=22558): stdout: | (launched: 2022-12-13_19:28:10.492185) 19:28:14.065765 run osmo-hlr_10.42.42.2(pid=22558): stderr: | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192810691 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192810705 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192810713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192810713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192810713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:28:14.111012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22551): Terminating (SIGTERM) 19:28:14.153775 run iperf3-srv_10.42.42.10(pid=22552): Terminating (SIGTERM) 19:28:14.196054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22553): Terminating (SIGTERM) 19:28:14.238495 run iperf3-srv_10.42.42.10(pid=22554): Terminating (SIGTERM) 19:28:14.280651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22557): Terminating (SIGTERM) 19:28:14.322966 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22560): Terminating (SIGTERM) 19:28:14.365800 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22563): Terminating (SIGTERM) 19:28:14.375527 --- ParallelTerminationStrategy: PID 22551 died... 19:28:14.432386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22551): Terminated: ok {rc=0} 19:28:14.442527 --- ParallelTerminationStrategy: PID 22552 died... 19:28:14.498717 run iperf3-srv_10.42.42.10(pid=22552): Terminated {rc=256} 19:28:14.508772 --- ParallelTerminationStrategy: PID 22553 died... 19:28:14.565531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22553): Terminated: ok {rc=0} 19:28:14.575685 --- ParallelTerminationStrategy: PID 22554 died... 19:28:14.631819 run iperf3-srv_10.42.42.10(pid=22554): Terminated {rc=256} 19:28:14.641922 --- ParallelTerminationStrategy: PID 22557 died... 19:28:14.698248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22557): Terminated: ok {rc=0} 19:28:14.708370 --- ParallelTerminationStrategy: PID 22560 died... 19:28:14.764668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22560): Terminated: ok {rc=0} 19:28:14.774769 --- ParallelTerminationStrategy: PID 22563 died... 19:28:14.831025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22563): Terminated: ok {rc=0} 19:28:14.918956 bus /gobi_0: Setting Powered False 19:28:16.041284 bus /gobi_0: Setting Powered False 19:28:17.150135 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22561): Process ended prematurely: osmo-stp_10.42.42.5(pid=22561) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22561)]