Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=23248): Process ended prematurely: osmo-stp_10.42.42.5(pid=23248) [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23248)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:37:56.720323 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:56.731488 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:37:56.888104 tst cs_paging_gprs_active.py: using LAC 35811 19:37:57.005541 tst cs_paging_gprs_active.py: using RAC 111 19:37:57.129829 tst cs_paging_gprs_active.py: using CellId 35811 19:37:57.247672 tst cs_paging_gprs_active.py: using BVCI 35812 19:37:57.270388 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.281578 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.292430 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.303294 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.314195 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.325500 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.336497 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.347306 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:37:57.358395 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:37:57.479549 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:37:57.756196 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:37:57.881126 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:37:58.191393 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23238): Launched 19:37:58.448722 run iperf3-srv_10.42.42.10(pid=23239): Launched 19:37:58.630843 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:37:58.755122 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:37:59.065140 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23240): Launched 19:37:59.322415 run iperf3-srv_10.42.42.10(pid=23241): Launched 19:37:59.505170 tst cs_paging_gprs_active.py:38: start network... 19:37:59.629586 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:38:00.108541 run create_hlr_db(pid=23242): Launched 19:38:00.295220 bus /gobi_6: Setting Powered False 19:38:01.334030 run create_hlr_db(pid=23242): Terminated: ok {rc=0} 19:38:01.757607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23244): Launched 19:38:02.176782 run osmo-hlr_10.42.42.2(pid=23245): Launched 19:38:02.295073 run osmo-stp_10.42.42.5: Starting osmo-stp 19:38:02.851250 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23247): Launched 19:38:03.173182 run osmo-stp_10.42.42.5(pid=23248): Launched 19:38:03.289609 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:38:03.849565 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23250): Launched 19:38:03.964281 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:38:04.251055 run patchelf(pid=23251): Launched 19:38:04.439221 run osmo-stp_10.42.42.5(pid=23248): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23248)] 19:38:04.577003 run osmo-stp_10.42.42.5(pid=23248): stdout: | (launched: 2022-12-13_19:38:03.014578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:38:04.714917 run osmo-stp_10.42.42.5(pid=23248): stderr: | �[0;m�[38;5;43m20221213193803199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193803200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193803200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193803200 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:38:04.848498 run osmo-stp_10.42.42.5(pid=23248): stdout: | (launched: 2022-12-13_19:38:03.014578) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:38:04.981201 run osmo-stp_10.42.42.5(pid=23248): stderr: | �[0;m�[38;5;43m20221213193803199 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213193803200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213193803200 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213193803200 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213193803201 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:38:05.134695 run patchelf(pid=23251): Terminating (SIGINT) 19:38:05.314853 run patchelf(pid=23251): Terminated: ok {rc=0} 19:38:05.348342 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23248): Process ended prematurely: osmo-stp_10.42.42.5(pid=23248) [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23248)] [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:38:05.358459 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:38:05.422348 run osmo-hlr_10.42.42.2(pid=23245): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23245)] 19:38:05.473867 run osmo-hlr_10.42.42.2(pid=23245): stdout: | (launched: 2022-12-13_19:38:01.913546) 19:38:05.525999 run osmo-hlr_10.42.42.2(pid=23245): stderr: | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213193802184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213193802196 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213193802204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213193802204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213193802204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:38:05.570680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23238): Terminating (SIGTERM) 19:38:05.613482 run iperf3-srv_10.42.42.10(pid=23239): Terminating (SIGTERM) 19:38:05.655549 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23240): Terminating (SIGTERM) 19:38:05.697673 run iperf3-srv_10.42.42.10(pid=23241): Terminating (SIGTERM) 19:38:05.739681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23244): Terminating (SIGTERM) 19:38:05.781644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23247): Terminating (SIGTERM) 19:38:05.823764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23250): Terminating (SIGTERM) 19:38:05.833596 --- ParallelTerminationStrategy: PID 23238 died... 19:38:05.890062 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23238): Terminated: ok {rc=0} 19:38:05.900219 --- ParallelTerminationStrategy: PID 23239 died... 19:38:05.956237 run iperf3-srv_10.42.42.10(pid=23239): Terminated {rc=256} 19:38:05.966311 --- ParallelTerminationStrategy: PID 23240 died... 19:38:06.022519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23240): Terminated: ok {rc=0} 19:38:06.032614 --- ParallelTerminationStrategy: PID 23241 died... 19:38:06.088704 run iperf3-srv_10.42.42.10(pid=23241): Terminated {rc=256} 19:38:06.098935 --- ParallelTerminationStrategy: PID 23244 died... 19:38:06.155119 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23244): Terminated: ok {rc=0} 19:38:06.165336 --- ParallelTerminationStrategy: PID 23247 died... 19:38:06.221273 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23247): Terminated: ok {rc=0} 19:38:06.231346 --- ParallelTerminationStrategy: PID 23250 died... 19:38:06.287344 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23250): Terminated: ok {rc=0} 19:38:06.374477 bus /gobi_0: Setting Powered False 19:38:07.480688 bus /gobi_0: Setting Powered False 19:38:08.593106 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23248): Process ended prematurely: osmo-stp_10.42.42.5(pid=23248) [trial-2393↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23248)]