Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=24488): Process ended prematurely: osmo-stp_10.42.42.5(pid=24488) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24488)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 19:51:34.914462 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:34.927249 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:51:35.075524 tst iperf3m4.py: using LAC 35884 19:51:35.202519 tst iperf3m4.py: using RAC 184 19:51:35.333657 tst iperf3m4.py: using CellId 35884 19:51:35.473029 tst iperf3m4.py: using BVCI 35885 19:51:35.497383 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.509300 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.521012 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.532692 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.545307 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.557943 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.570653 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.583020 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:51:35.595725 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:35.716774 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:35.835282 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:35.953180 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:51:36.248568 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 19:51:36.383392 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:36.715979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24474): Launched 19:51:36.992472 run iperf3-srv_10.42.42.10(pid=24475): Launched 19:51:37.189703 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 19:51:37.324705 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:37.658189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24476): Launched 19:51:37.934700 run iperf3-srv_10.42.42.10(pid=24477): Launched 19:51:38.131741 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 19:51:38.266608 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:38.599854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24478): Launched 19:51:38.876274 run iperf3-srv_10.42.42.10(pid=24479): Launched 19:51:39.073191 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 19:51:39.207642 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:51:39.541835 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24480): Launched 19:51:39.818479 run iperf3-srv_10.42.42.10(pid=24481): Launched 19:51:40.015063 tst iperf3m4.py:8: start network... 19:51:40.149302 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:51:40.655225 run create_hlr_db(pid=24482): Launched 19:51:40.840292 bus /gobi_6: Setting Powered False 19:51:41.861893 run create_hlr_db(pid=24482): Terminated: ok {rc=0} 19:51:42.288619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24484): Launched 19:51:42.609494 run osmo-hlr_10.42.42.2(pid=24485): Launched 19:51:42.728683 run osmo-stp_10.42.42.5: Starting osmo-stp 19:51:43.289540 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24487): Launched 19:51:43.612402 run osmo-stp_10.42.42.5(pid=24488): Launched 19:51:43.729140 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:51:44.291878 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24490): Launched 19:51:44.407066 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:51:44.687357 run patchelf(pid=24491): Launched 19:51:44.875291 run osmo-stp_10.42.42.5(pid=24488): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24488)] 19:51:45.013306 run osmo-stp_10.42.42.5(pid=24488): stdout: | (launched: 2022-12-13_19:51:43.454004) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:45.151308 run osmo-stp_10.42.42.5(pid=24488): stderr: | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195143645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:45.285209 run osmo-stp_10.42.42.5(pid=24488): stdout: | (launched: 2022-12-13_19:51:43.454004) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:51:45.417574 run osmo-stp_10.42.42.5(pid=24488): stderr: | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195143644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195143645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195143645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:51:45.571220 run patchelf(pid=24491): Terminating (SIGINT) 19:51:45.750859 run patchelf(pid=24491): Terminated: ok {rc=0} 19:51:45.784032 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24488): Process ended prematurely: osmo-stp_10.42.42.5(pid=24488) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24488)] [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 19:51:45.794082 tst iperf3m4.py:8: Test FAILED (10.9 sec) 19:51:45.858721 run osmo-hlr_10.42.42.2(pid=24485): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24485)] 19:51:45.912437 run osmo-hlr_10.42.42.2(pid=24485): stdout: | (launched: 2022-12-13_19:51:42.451797) 19:51:45.966751 run osmo-hlr_10.42.42.2(pid=24485): stderr: | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213195142646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213195142659 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213195142667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213195142667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213195142667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:51:46.013541 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24474): Terminating (SIGTERM) 19:51:46.057349 run iperf3-srv_10.42.42.10(pid=24475): Terminating (SIGTERM) 19:51:46.102969 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24476): Terminating (SIGTERM) 19:51:46.146795 run iperf3-srv_10.42.42.10(pid=24477): Terminating (SIGTERM) 19:51:46.190723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24478): Terminating (SIGTERM) 19:51:46.237016 run iperf3-srv_10.42.42.10(pid=24479): Terminating (SIGTERM) 19:51:46.281500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24480): Terminating (SIGTERM) 19:51:46.325706 run iperf3-srv_10.42.42.10(pid=24481): Terminating (SIGTERM) 19:51:46.369629 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24484): Terminating (SIGTERM) 19:51:46.413519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24487): Terminating (SIGTERM) 19:51:46.457552 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24490): Terminating (SIGTERM) 19:51:46.467704 --- ParallelTerminationStrategy: PID 24474 died... 19:51:46.528310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24474): Terminated: ok {rc=0} 19:51:46.539775 --- ParallelTerminationStrategy: PID 24475 died... 19:51:46.597410 run iperf3-srv_10.42.42.10(pid=24475): Terminated {rc=256} 19:51:46.608278 --- ParallelTerminationStrategy: PID 24476 died... 19:51:46.667266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24476): Terminated: ok {rc=0} 19:51:46.679071 --- ParallelTerminationStrategy: PID 24477 died... 19:51:46.736607 run iperf3-srv_10.42.42.10(pid=24477): Terminated {rc=256} 19:51:46.748365 --- ParallelTerminationStrategy: PID 24478 died... 19:51:46.806111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24478): Terminated: ok {rc=0} 19:51:46.818024 --- ParallelTerminationStrategy: PID 24479 died... 19:51:46.875805 run iperf3-srv_10.42.42.10(pid=24479): Terminated {rc=256} 19:51:46.887598 --- ParallelTerminationStrategy: PID 24480 died... 19:51:46.945444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24480): Terminated: ok {rc=0} 19:51:46.956997 --- ParallelTerminationStrategy: PID 24481 died... 19:51:47.014645 run iperf3-srv_10.42.42.10(pid=24481): Terminated {rc=256} 19:51:47.026531 --- ParallelTerminationStrategy: PID 24484 died... 19:51:47.084339 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24484): Terminated: ok {rc=0} 19:51:47.096136 --- ParallelTerminationStrategy: PID 24487 died... 19:51:47.154010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24487): Terminated: ok {rc=0} 19:51:47.165747 --- ParallelTerminationStrategy: PID 24490 died... 19:51:47.223928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24490): Terminated: ok {rc=0} 19:51:47.313249 bus /gobi_4: Setting Powered False 19:51:48.420655 bus /gobi_4: Setting Powered False 19:51:49.529177 bus /gobi_1: Setting Powered False 19:51:50.634933 bus /gobi_1: Setting Powered False 19:51:51.742644 bus /gobi_0: Setting Powered False 19:51:52.848850 bus /gobi_0: Setting Powered False 19:51:53.958224 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24488): Process ended prematurely: osmo-stp_10.42.42.5(pid=24488) [trial-2393↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24488)]