Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20267): Process ended prematurely: osmo-stp_10.42.42.5(pid=20267) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20267)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 19:02:56.766769 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:56.778516 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:02:56.946288 tst cs_paging_gprs_active.py: using LAC 35626 19:02:57.067882 tst cs_paging_gprs_active.py: using RAC 181 19:02:57.190159 tst cs_paging_gprs_active.py: using CellId 35626 19:02:57.309473 tst cs_paging_gprs_active.py: using BVCI 35627 19:02:57.332757 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.343627 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.354372 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.365050 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.375675 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.386803 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.397748 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.408330 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:02:57.419189 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:02:57.539168 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:02:57.826763 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:02:57.955199 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:02:58.273887 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20256): Launched 19:02:58.535414 run iperf3-srv_10.42.42.10(pid=20257): Launched 19:02:58.721724 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:02:58.848523 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:02:59.164743 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20258): Launched 19:02:59.427246 run iperf3-srv_10.42.42.10(pid=20259): Launched 19:02:59.613571 tst cs_paging_gprs_active.py:38: start network... 19:02:59.741009 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:03:00.229843 run create_hlr_db(pid=20260): Launched 19:03:00.405080 bus /gobi_6: Setting Powered False 19:03:01.443218 run create_hlr_db(pid=20260): Terminated: ok {rc=0} 19:03:01.900912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20263): Launched 19:03:02.272738 run osmo-hlr_10.42.42.2(pid=20264): Launched 19:03:02.383796 run osmo-stp_10.42.42.5: Starting osmo-stp 19:03:02.912682 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20266): Launched 19:03:03.217548 run osmo-stp_10.42.42.5(pid=20267): Launched 19:03:03.327110 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:03:03.859060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20269): Launched 19:03:03.967836 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:03:04.234575 run patchelf(pid=20270): Launched 19:03:04.413843 run osmo-stp_10.42.42.5(pid=20267): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20267)] 19:03:04.544127 run osmo-stp_10.42.42.5(pid=20267): stdout: | (launched: 2022-12-13_19:03:03.068363) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:03:04.674808 run osmo-stp_10.42.42.5(pid=20267): stderr: | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190303239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190303239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190303239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190303240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:03:04.801153 run osmo-stp_10.42.42.5(pid=20267): stdout: | (launched: 2022-12-13_19:03:03.068363) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:03:04.926215 run osmo-stp_10.42.42.5(pid=20267): stderr: | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190303238 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190303239 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190303239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190303239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190303240 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:03:05.071532 run patchelf(pid=20270): Terminating (SIGINT) 19:03:05.242294 run patchelf(pid=20270): Terminated: ok {rc=0} 19:03:05.273671 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20267): Process ended prematurely: osmo-stp_10.42.42.5(pid=20267) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20267)] [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 19:03:05.282894 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:03:05.342940 run osmo-hlr_10.42.42.2(pid=20264): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20264)] 19:03:05.392013 run osmo-hlr_10.42.42.2(pid=20264): stdout: | (launched: 2022-12-13_19:03:02.072314) 19:03:05.441773 run osmo-hlr_10.42.42.2(pid=20264): stderr: | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213190302262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213190302274 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213190302283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213190302283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213190302283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:03:05.484160 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20256): Terminating (SIGTERM) 19:03:05.524185 run iperf3-srv_10.42.42.10(pid=20257): Terminating (SIGTERM) 19:03:05.563991 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20258): Terminating (SIGTERM) 19:03:05.603690 run iperf3-srv_10.42.42.10(pid=20259): Terminating (SIGTERM) 19:03:05.643491 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20263): Terminating (SIGTERM) 19:03:05.683261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20266): Terminating (SIGTERM) 19:03:05.723070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20269): Terminating (SIGTERM) 19:03:05.732183 --- ParallelTerminationStrategy: PID 20256 died... 19:03:05.785519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20256): Terminated: ok {rc=0} 19:03:05.795020 --- ParallelTerminationStrategy: PID 20257 died... 19:03:05.848059 run iperf3-srv_10.42.42.10(pid=20257): Terminated {rc=256} 19:03:05.857671 --- ParallelTerminationStrategy: PID 20258 died... 19:03:05.910702 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20258): Terminated: ok {rc=0} 19:03:05.920133 --- ParallelTerminationStrategy: PID 20259 died... 19:03:05.973019 run iperf3-srv_10.42.42.10(pid=20259): Terminated {rc=256} 19:03:05.982538 --- ParallelTerminationStrategy: PID 20263 died... 19:03:06.035408 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20263): Terminated: ok {rc=0} 19:03:06.044887 --- ParallelTerminationStrategy: PID 20266 died... 19:03:06.097705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20266): Terminated: ok {rc=0} 19:03:06.107193 --- ParallelTerminationStrategy: PID 20269 died... 19:03:06.160024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20269): Terminated: ok {rc=0} 19:03:06.248514 bus /gobi_0: Setting Powered False 19:03:07.354097 bus /gobi_0: Setting Powered False 19:03:08.460717 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20267): Process ended prematurely: osmo-stp_10.42.42.5(pid=20267) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20267)]