Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=20196): Process ended prematurely: osmo-stp_10.42.42.5(pid=20196) [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20196)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:01:56.536855 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:56.547803 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:01:56.685969 tst cs_paging_gprs_active.py: using LAC 35621 19:01:56.817684 tst cs_paging_gprs_active.py: using RAC 176 19:01:56.939143 tst cs_paging_gprs_active.py: using CellId 35621 19:01:57.058194 tst cs_paging_gprs_active.py: using BVCI 35622 19:01:57.081632 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.092490 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.103216 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.113910 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.125033 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.136207 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.147525 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.158719 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:01:57.170078 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:01:57.290883 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:01:57.574321 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:01:57.702248 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:01:58.019377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20186): Launched 19:01:58.282759 run iperf3-srv_10.42.42.10(pid=20187): Launched 19:01:58.469978 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:01:58.597662 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:01:58.916085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20188): Launched 19:01:59.180606 run iperf3-srv_10.42.42.10(pid=20189): Launched 19:01:59.367147 tst cs_paging_gprs_active.py:38: start network... 19:01:59.494453 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:01:59.985667 run create_hlr_db(pid=20190): Launched 19:02:00.160789 bus /gobi_6: Setting Powered False 19:02:01.246345 run create_hlr_db(pid=20190): Terminated: ok {rc=0} 19:02:01.737750 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20192): Launched 19:02:02.176233 run osmo-hlr_10.42.42.2(pid=20193): Launched 19:02:02.339816 run osmo-stp_10.42.42.5: Starting osmo-stp 19:02:02.867912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20195): Launched 19:02:03.173280 run osmo-stp_10.42.42.5(pid=20196): Launched 19:02:03.283775 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:02:03.814851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20198): Launched 19:02:03.923171 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:02:04.188673 run patchelf(pid=20199): Launched 19:02:04.367123 run osmo-stp_10.42.42.5(pid=20196): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20196)] 19:02:04.497632 run osmo-stp_10.42.42.5(pid=20196): stdout: | (launched: 2022-12-13_19:02:03.023037) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:02:04.627926 run osmo-stp_10.42.42.5(pid=20196): stderr: | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190203192 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:02:04.753805 run osmo-stp_10.42.42.5(pid=20196): stdout: | (launched: 2022-12-13_19:02:03.023037) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:02:04.878776 run osmo-stp_10.42.42.5(pid=20196): stderr: | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190203191 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190203192 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190203192 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:02:05.024296 run patchelf(pid=20199): Terminating (SIGINT) 19:02:05.195655 run patchelf(pid=20199): Terminated: ok {rc=0} 19:02:05.227033 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20196): Process ended prematurely: osmo-stp_10.42.42.5(pid=20196) [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20196)] [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:02:05.236196 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:02:05.296195 run osmo-hlr_10.42.42.2(pid=20193): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20193)] 19:02:05.345347 run osmo-hlr_10.42.42.2(pid=20193): stdout: | (launched: 2022-12-13_19:02:01.912291) 19:02:05.394947 run osmo-hlr_10.42.42.2(pid=20193): stderr: | �[0;m�[1;31m20221213190202125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213190202125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213190202125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213190202125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213190202125 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213190202126 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213190202142 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213190202165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213190202165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213190202166 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:02:05.437433 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20186): Terminating (SIGTERM) 19:02:05.477121 run iperf3-srv_10.42.42.10(pid=20187): Terminating (SIGTERM) 19:02:05.516695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20188): Terminating (SIGTERM) 19:02:05.556187 run iperf3-srv_10.42.42.10(pid=20189): Terminating (SIGTERM) 19:02:05.595765 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20192): Terminating (SIGTERM) 19:02:05.635455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20195): Terminating (SIGTERM) 19:02:05.675069 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20198): Terminating (SIGTERM) 19:02:05.684153 --- ParallelTerminationStrategy: PID 20186 died... 19:02:05.736894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20186): Terminated: ok {rc=0} 19:02:05.746362 --- ParallelTerminationStrategy: PID 20187 died... 19:02:05.799226 run iperf3-srv_10.42.42.10(pid=20187): Terminated {rc=256} 19:02:05.808658 --- ParallelTerminationStrategy: PID 20188 died... 19:02:05.861429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20188): Terminated: ok {rc=0} 19:02:05.870867 --- ParallelTerminationStrategy: PID 20189 died... 19:02:05.923260 run iperf3-srv_10.42.42.10(pid=20189): Terminated {rc=256} 19:02:05.932612 --- ParallelTerminationStrategy: PID 20192 died... 19:02:05.985145 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20192): Terminated: ok {rc=0} 19:02:05.994608 --- ParallelTerminationStrategy: PID 20195 died... 19:02:06.047207 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20195): Terminated: ok {rc=0} 19:02:06.056681 --- ParallelTerminationStrategy: PID 20198 died... 19:02:06.109305 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20198): Terminated: ok {rc=0} 19:02:06.197845 bus /gobi_0: Setting Powered False 19:02:07.303494 bus /gobi_0: Setting Powered False 19:02:08.411436 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20196): Process ended prematurely: osmo-stp_10.42.42.5(pid=20196) [trial-2393↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20196)]