Failed
dynts:trx-lms+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)]
Standard Output
---------------------------------------------- trial-2394 dynts:trx-lms+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 20:58:57.328713 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.339624 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 20:58:57.497229 tst switch_tch_pdch.py: using LAC 36236 20:58:57.615333 tst switch_tch_pdch.py: using RAC 26 20:58:57.731274 tst switch_tch_pdch.py: using CellId 36236 20:58:57.847396 tst switch_tch_pdch.py: using BVCI 36237 20:58:57.870340 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.881319 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.892070 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.902936 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.914560 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.926265 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.938048 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 20:58:57.949659 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 20:58:58.071075 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 20:58:58.346778 tst switch_tch_pdch.py:51: start network... 20:58:58.470296 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:58:58.914682 run create_hlr_db(pid=31356): Launched 20:58:59.035688 bus /gobi_6: Setting Powered False 20:59:00.106627 run create_hlr_db(pid=31356): Terminated: ok {rc=0} 20:59:00.501663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Launched 20:59:00.819200 run osmo-hlr_10.42.42.2(pid=31359): Launched 20:59:00.980664 run osmo-stp_10.42.42.5: Starting osmo-stp 20:59:01.620476 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Launched 20:59:02.116124 run osmo-stp_10.42.42.5(pid=31362): Launched 20:59:02.364345 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:59:02.893753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Launched 20:59:03.006808 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:59:03.285260 run patchelf(pid=31365): Launched 20:59:03.471836 run osmo-stp_10.42.42.5(pid=31362): ERR: Terminated: ERROR {rc=1} [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)] 20:59:03.608561 run osmo-stp_10.42.42.5(pid=31362): stdout: | (launched: 2022-12-13_20:59:01.822765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:59:03.745134 run osmo-stp_10.42.42.5(pid=31362): stderr: | �[0;m�[38;5;43m20221213205902120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205902120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205902121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205902122 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:59:03.877167 run osmo-stp_10.42.42.5(pid=31362): stdout: | (launched: 2022-12-13_20:59:01.822765) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:59:04.007866 run osmo-stp_10.42.42.5(pid=31362): stderr: | �[0;m�[38;5;43m20221213205902120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205902120 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205902121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205902122 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205902124 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:59:04.160234 run patchelf(pid=31365): Terminating (SIGINT) 20:59:04.340091 run patchelf(pid=31365): Terminated: ok {rc=0} 20:59:04.373115 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)] [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 20:59:04.382404 tst switch_tch_pdch.py:54: Test FAILED (7.0 sec) 20:59:04.444572 run osmo-hlr_10.42.42.2(pid=31359): ERR: Terminated: ERROR {rc=237} [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31359)] 20:59:04.495645 run osmo-hlr_10.42.42.2(pid=31359): stdout: | (launched: 2022-12-13_20:59:00.663666) 20:59:04.547439 run osmo-hlr_10.42.42.2(pid=31359): stderr: | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213205900903 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213205900925 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/dynts:trx-lms+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213205900934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213205900934 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213205900935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:59:04.591377 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Terminating (SIGTERM) 20:59:04.632726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Terminating (SIGTERM) 20:59:04.674174 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Terminating (SIGTERM) 20:59:04.683827 --- ParallelTerminationStrategy: PID 31358 died... 20:59:04.738932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31358): Terminated: ok {rc=0} 20:59:04.749165 --- ParallelTerminationStrategy: PID 31361 died... 20:59:04.803973 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31361): Terminated: ok {rc=0} 20:59:04.813992 --- ParallelTerminationStrategy: PID 31364 died... 20:59:04.869110 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31364): Terminated: ok {rc=0} 20:59:04.955234 bus /gobi_0: Setting Powered False 20:59:06.061093 bus /gobi_0: Setting Powered False 20:59:07.168381 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31362): Process ended prematurely: osmo-stp_10.42.42.5(pid=31362) [trial-2394↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31362)]