Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=27437): Process ended prematurely: osmo-stp_10.42.42.5(pid=27437) [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27437)]
Standard Output
---------------------------------------------- trial-2394 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:21:58.216299 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.227522 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:21:58.378855 tst cs_paging_gprs_active.py: using LAC 36041 20:21:58.506501 tst cs_paging_gprs_active.py: using RAC 86 20:21:58.632431 tst cs_paging_gprs_active.py: using CellId 36041 20:21:58.759176 tst cs_paging_gprs_active.py: using BVCI 36042 20:21:58.784319 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.795675 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.806711 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.817810 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.828799 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.839902 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.851123 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.862100 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:21:58.873343 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:21:58.994321 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:21:59.293122 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:21:59.430780 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:59.749059 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27427): Launched 20:22:00.014463 run iperf3-srv_10.42.42.10(pid=27428): Launched 20:22:00.202125 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:22:00.329826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:22:00.648457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27429): Launched 20:22:00.976572 run iperf3-srv_10.42.42.10(pid=27430): Launched 20:22:01.180592 tst cs_paging_gprs_active.py:38: start network... 20:22:01.311701 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:22:01.882646 run create_hlr_db(pid=27431): Launched 20:22:02.078221 bus /gobi_6: Setting Powered False 20:22:03.093990 run create_hlr_db(pid=27431): Terminated: ok {rc=0} 20:22:03.506940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27433): Launched 20:22:03.813961 run osmo-hlr_10.42.42.2(pid=27434): Launched 20:22:03.930960 run osmo-stp_10.42.42.5: Starting osmo-stp 20:22:04.463712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27436): Launched 20:22:04.770986 run osmo-stp_10.42.42.5(pid=27437): Launched 20:22:04.882367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:22:05.416521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27439): Launched 20:22:05.525825 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:22:05.793452 run patchelf(pid=27440): Launched 20:22:05.973595 run osmo-stp_10.42.42.5(pid=27437): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27437)] 20:22:06.105877 run osmo-stp_10.42.42.5(pid=27437): stdout: | (launched: 2022-12-13_20:22:04.619536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:06.237759 run osmo-stp_10.42.42.5(pid=27437): stderr: | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202204789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:06.365679 run osmo-stp_10.42.42.5(pid=27437): stdout: | (launched: 2022-12-13_20:22:04.619536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:06.492271 run osmo-stp_10.42.42.5(pid=27437): stderr: | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202204788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202204789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202204789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:06.640475 run patchelf(pid=27440): Terminating (SIGINT) 20:22:06.815090 run patchelf(pid=27440): Terminated: ok {rc=0} 20:22:06.846864 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27437): Process ended prematurely: osmo-stp_10.42.42.5(pid=27437) [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27437)] [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:22:06.856058 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:22:06.917268 run osmo-hlr_10.42.42.2(pid=27434): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27434)] 20:22:06.966676 run osmo-hlr_10.42.42.2(pid=27434): stdout: | (launched: 2022-12-13_20:22:03.662592) 20:22:07.016867 run osmo-hlr_10.42.42.2(pid=27434): stderr: | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213202203837 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213202203851 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213202203862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213202203862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213202203862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:22:07.059647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27427): Terminating (SIGTERM) 20:22:07.099950 run iperf3-srv_10.42.42.10(pid=27428): Terminating (SIGTERM) 20:22:07.140862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27429): Terminating (SIGTERM) 20:22:07.181592 run iperf3-srv_10.42.42.10(pid=27430): Terminating (SIGTERM) 20:22:07.222770 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27433): Terminating (SIGTERM) 20:22:07.263503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27436): Terminating (SIGTERM) 20:22:07.303971 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27439): Terminating (SIGTERM) 20:22:07.313255 --- ParallelTerminationStrategy: PID 27427 died... 20:22:07.367872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27427): Terminated: ok {rc=0} 20:22:07.377378 --- ParallelTerminationStrategy: PID 27428 died... 20:22:07.431465 run iperf3-srv_10.42.42.10(pid=27428): Terminated {rc=256} 20:22:07.441107 --- ParallelTerminationStrategy: PID 27429 died... 20:22:07.495846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27429): Terminated: ok {rc=0} 20:22:07.505602 --- ParallelTerminationStrategy: PID 27430 died... 20:22:07.559621 run iperf3-srv_10.42.42.10(pid=27430): Terminated {rc=256} 20:22:07.569284 --- ParallelTerminationStrategy: PID 27433 died... 20:22:07.623726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27433): Terminated: ok {rc=0} 20:22:07.633445 --- ParallelTerminationStrategy: PID 27436 died... 20:22:07.687609 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27436): Terminated: ok {rc=0} 20:22:07.697350 --- ParallelTerminationStrategy: PID 27439 died... 20:22:07.751481 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27439): Terminated: ok {rc=0} 20:22:07.840805 bus /gobi_0: Setting Powered False 20:22:08.944480 bus /gobi_0: Setting Powered False 20:22:10.056835 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27437): Process ended prematurely: osmo-stp_10.42.42.5(pid=27437) [trial-2394↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27437)]