Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27507): Process ended prematurely: osmo-stp_10.42.42.5(pid=27507) [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27507)]
Standard Output
---------------------------------------------- trial-2394 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:22:58.618980 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:58.629848 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:22:58.781813 tst cs_paging_gprs_active.py: using LAC 36046 20:22:58.911267 tst cs_paging_gprs_active.py: using RAC 91 20:22:59.038681 tst cs_paging_gprs_active.py: using CellId 36046 20:22:59.168380 tst cs_paging_gprs_active.py: using BVCI 36047 20:22:59.193650 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.205141 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.216059 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.227204 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.238235 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.249348 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.260582 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.271627 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:59.282856 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:22:59.401537 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:22:59.698960 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:22:59.835100 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:23:00.172599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27497): Launched 20:23:00.454697 run iperf3-srv_10.42.42.10(pid=27498): Launched 20:23:00.655035 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:23:00.791402 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:23:01.147031 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27499): Launched 20:23:01.461893 run iperf3-srv_10.42.42.10(pid=27500): Launched 20:23:01.659749 tst cs_paging_gprs_active.py:38: start network... 20:23:01.795069 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:23:02.330619 run create_hlr_db(pid=27501): Launched 20:23:02.509985 bus /gobi_6: Setting Powered False 20:23:03.529539 run create_hlr_db(pid=27501): Terminated: ok {rc=0} 20:23:03.964700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27503): Launched 20:23:04.292174 run osmo-hlr_10.42.42.2(pid=27504): Launched 20:23:04.415502 run osmo-stp_10.42.42.5: Starting osmo-stp 20:23:04.984872 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27506): Launched 20:23:05.313182 run osmo-stp_10.42.42.5(pid=27507): Launched 20:23:05.430990 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:23:06.003876 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27509): Launched 20:23:06.120706 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:23:06.407196 run patchelf(pid=27510): Launched 20:23:06.598459 run osmo-stp_10.42.42.5(pid=27507): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27507)] 20:23:06.737764 run osmo-stp_10.42.42.5(pid=27507): stdout: | (launched: 2022-12-13_20:23:05.152263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:23:06.877582 run osmo-stp_10.42.42.5(pid=27507): stderr: | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202305344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:23:07.013650 run osmo-stp_10.42.42.5(pid=27507): stdout: | (launched: 2022-12-13_20:23:05.152263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:23:07.148373 run osmo-stp_10.42.42.5(pid=27507): stderr: | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202305343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202305344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202305344 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:23:07.305479 run patchelf(pid=27510): Terminating (SIGINT) 20:23:07.489308 run patchelf(pid=27510): Terminated: ok {rc=0} 20:23:07.523179 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27507): Process ended prematurely: osmo-stp_10.42.42.5(pid=27507) [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27507)] [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:23:07.532919 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 20:23:07.596105 run osmo-hlr_10.42.42.2(pid=27504): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27504)] 20:23:07.647542 run osmo-hlr_10.42.42.2(pid=27504): stdout: | (launched: 2022-12-13_20:23:04.131527) 20:23:07.699580 run osmo-hlr_10.42.42.2(pid=27504): stderr: | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213202304329 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213202304342 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213202304350 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213202304350 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213202304351 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:23:07.743981 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27497): Terminating (SIGTERM) 20:23:07.785902 run iperf3-srv_10.42.42.10(pid=27498): Terminating (SIGTERM) 20:23:07.828341 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27499): Terminating (SIGTERM) 20:23:07.870680 run iperf3-srv_10.42.42.10(pid=27500): Terminating (SIGTERM) 20:23:07.912645 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27503): Terminating (SIGTERM) 20:23:07.955098 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27506): Terminating (SIGTERM) 20:23:07.997647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27509): Terminating (SIGTERM) 20:23:08.007267 --- ParallelTerminationStrategy: PID 27497 died... 20:23:08.063241 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27497): Terminated: ok {rc=0} 20:23:08.073295 --- ParallelTerminationStrategy: PID 27498 died... 20:23:08.129062 run iperf3-srv_10.42.42.10(pid=27498): Terminated {rc=256} 20:23:08.138982 --- ParallelTerminationStrategy: PID 27499 died... 20:23:08.194699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27499): Terminated: ok {rc=0} 20:23:08.204697 --- ParallelTerminationStrategy: PID 27500 died... 20:23:08.260183 run iperf3-srv_10.42.42.10(pid=27500): Terminated {rc=256} 20:23:08.270512 --- ParallelTerminationStrategy: PID 27503 died... 20:23:08.326211 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27503): Terminated: ok {rc=0} 20:23:08.336226 --- ParallelTerminationStrategy: PID 27506 died... 20:23:08.392292 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27506): Terminated: ok {rc=0} 20:23:08.402333 --- ParallelTerminationStrategy: PID 27509 died... 20:23:08.457941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27509): Terminated: ok {rc=0} 20:23:08.545582 bus /gobi_0: Setting Powered False 20:23:09.651794 bus /gobi_0: Setting Powered False 20:23:10.763589 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27507): Process ended prematurely: osmo-stp_10.42.42.5(pid=27507) [trial-2394↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27507)]