Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26388): Process ended prematurely: osmo-stp_10.42.42.5(pid=26388) [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26388)]
Standard Output
---------------------------------------------- trial-2394 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 20:14:52.494541 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:52.506613 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:14:52.653977 tst ping_idle_ping.py: using LAC 36003 20:14:52.774654 tst ping_idle_ping.py: using RAC 48 20:14:52.896133 tst ping_idle_ping.py: using CellId 36003 20:14:53.024115 tst ping_idle_ping.py: using BVCI 36004 20:14:53.049550 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.060940 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.072312 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.083848 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.095135 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.106403 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.117798 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:14:53.128819 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:14:53.424564 tst ping_idle_ping.py:24: start network... 20:14:53.560525 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:14:54.086824 run create_hlr_db(pid=26382): Launched 20:14:54.275585 bus /gobi_6: Setting Powered False 20:14:55.297359 run create_hlr_db(pid=26382): Terminated: ok {rc=0} 20:14:55.711918 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26384): Launched 20:14:56.021144 run osmo-hlr_10.42.42.2(pid=26385): Launched 20:14:56.141552 run osmo-stp_10.42.42.5: Starting osmo-stp 20:14:56.680820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26387): Launched 20:14:56.987418 run osmo-stp_10.42.42.5(pid=26388): Launched 20:14:57.098196 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:14:57.630545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26390): Launched 20:14:57.738849 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:14:58.006115 run patchelf(pid=26391): Launched 20:14:58.184315 run osmo-stp_10.42.42.5(pid=26388): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26388)] 20:14:58.314584 run osmo-stp_10.42.42.5(pid=26388): stdout: | (launched: 2022-12-13_20:14:56.835413) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:14:58.444878 run osmo-stp_10.42.42.5(pid=26388): stderr: | �[0;m�[38;5;43m20221213201457008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201457008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201457009 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201457009 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:14:58.571593 run osmo-stp_10.42.42.5(pid=26388): stdout: | (launched: 2022-12-13_20:14:56.835413) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:14:58.697269 run osmo-stp_10.42.42.5(pid=26388): stderr: | �[0;m�[38;5;43m20221213201457008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201457008 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201457009 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201457009 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201457010 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:14:58.843214 run patchelf(pid=26391): Terminating (SIGINT) 20:14:59.015731 run patchelf(pid=26391): Terminated: ok {rc=0} 20:14:59.046786 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26388): Process ended prematurely: osmo-stp_10.42.42.5(pid=26388) [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26388)] [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 20:14:59.055426 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 20:14:59.115966 run osmo-hlr_10.42.42.2(pid=26385): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26385)] 20:14:59.165678 run osmo-hlr_10.42.42.2(pid=26385): stdout: | (launched: 2022-12-13_20:14:55.868081) 20:14:59.215596 run osmo-hlr_10.42.42.2(pid=26385): stderr: | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213201456048 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213201456061 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213201456069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213201456069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213201456069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:14:59.258252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26384): Terminating (SIGTERM) 20:14:59.298892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26387): Terminating (SIGTERM) 20:14:59.339636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26390): Terminating (SIGTERM) 20:14:59.348851 --- ParallelTerminationStrategy: PID 26384 died... 20:14:59.403096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26384): Terminated: ok {rc=0} 20:14:59.412576 --- ParallelTerminationStrategy: PID 26387 died... 20:14:59.466368 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26387): Terminated: ok {rc=0} 20:14:59.475926 --- ParallelTerminationStrategy: PID 26390 died... 20:14:59.529748 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26390): Terminated: ok {rc=0} 20:14:59.614334 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26388): Process ended prematurely: osmo-stp_10.42.42.5(pid=26388) [trial-2394↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26388)]