Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26269): Process ended prematurely: osmo-stp_10.42.42.5(pid=26269) [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26269)]
Standard Output
---------------------------------------------- trial-2394 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:12:59.484676 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:12:59.495952 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:12:59.635144 tst cs_paging_gprs_active.py: using LAC 35994 20:12:59.763407 tst cs_paging_gprs_active.py: using RAC 39 20:12:59.893745 tst cs_paging_gprs_active.py: using CellId 35994 20:13:00.023984 tst cs_paging_gprs_active.py: using BVCI 35995 20:13:00.049565 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.060812 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.071995 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.083312 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.094362 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.105421 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.116590 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.127641 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:13:00.138989 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:13:00.259024 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:13:00.560817 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:13:00.699726 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:01.085585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26259): Launched 20:13:01.391838 run iperf3-srv_10.42.42.10(pid=26260): Launched 20:13:01.599675 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:13:01.741478 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:13:02.104238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26261): Launched 20:13:02.395976 run iperf3-srv_10.42.42.10(pid=26262): Launched 20:13:02.599936 tst cs_paging_gprs_active.py:38: start network... 20:13:02.739182 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:13:03.272545 run create_hlr_db(pid=26263): Launched 20:13:03.464755 bus /gobi_6: Setting Powered False 20:13:04.485305 run create_hlr_db(pid=26263): Terminated: ok {rc=0} 20:13:04.903570 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26265): Launched 20:13:05.216411 run osmo-hlr_10.42.42.2(pid=26266): Launched 20:13:05.338503 run osmo-stp_10.42.42.5: Starting osmo-stp 20:13:05.883690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26268): Launched 20:13:06.195946 run osmo-stp_10.42.42.5(pid=26269): Launched 20:13:06.308731 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:13:06.848100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26271): Launched 20:13:06.958282 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:13:07.230345 run patchelf(pid=26272): Launched 20:13:07.411118 run osmo-stp_10.42.42.5(pid=26269): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26269)] 20:13:07.543767 run osmo-stp_10.42.42.5(pid=26269): stdout: | (launched: 2022-12-13_20:13:06.041146) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:07.677272 run osmo-stp_10.42.42.5(pid=26269): stderr: | �[0;m�[38;5;43m20221213201306213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201306214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201306214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201306214 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:07.806087 run osmo-stp_10.42.42.5(pid=26269): stdout: | (launched: 2022-12-13_20:13:06.041146) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:07.934430 run osmo-stp_10.42.42.5(pid=26269): stderr: | �[0;m�[38;5;43m20221213201306213 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213201306214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213201306214 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213201306214 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213201306215 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:08.083410 run patchelf(pid=26272): Terminating (SIGINT) 20:13:08.259117 run patchelf(pid=26272): Terminated: ok {rc=0} 20:13:08.291349 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26269): Process ended prematurely: osmo-stp_10.42.42.5(pid=26269) [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26269)] [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:13:08.300740 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 20:13:08.361796 run osmo-hlr_10.42.42.2(pid=26266): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26266)] 20:13:08.411655 run osmo-hlr_10.42.42.2(pid=26266): stdout: | (launched: 2022-12-13_20:13:05.061294) 20:13:08.462168 run osmo-hlr_10.42.42.2(pid=26266): stderr: | �[0;m�[1;31m20221213201305239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213201305239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213201305239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213201305239 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213201305240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213201305240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213201305251 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213201305260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213201305260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213201305260 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:13:08.505485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26259): Terminating (SIGTERM) 20:13:08.546298 run iperf3-srv_10.42.42.10(pid=26260): Terminating (SIGTERM) 20:13:08.586851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26261): Terminating (SIGTERM) 20:13:08.627101 run iperf3-srv_10.42.42.10(pid=26262): Terminating (SIGTERM) 20:13:08.667922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26265): Terminating (SIGTERM) 20:13:08.708469 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26268): Terminating (SIGTERM) 20:13:08.749335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26271): Terminating (SIGTERM) 20:13:08.758550 --- ParallelTerminationStrategy: PID 26259 died... 20:13:08.812725 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26259): Terminated: ok {rc=0} 20:13:08.822335 --- ParallelTerminationStrategy: PID 26260 died... 20:13:08.876072 run iperf3-srv_10.42.42.10(pid=26260): Terminated {rc=256} 20:13:08.885900 --- ParallelTerminationStrategy: PID 26261 died... 20:13:08.939871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26261): Terminated: ok {rc=0} 20:13:08.949450 --- ParallelTerminationStrategy: PID 26262 died... 20:13:09.003005 run iperf3-srv_10.42.42.10(pid=26262): Terminated {rc=256} 20:13:09.012528 --- ParallelTerminationStrategy: PID 26265 died... 20:13:09.066329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26265): Terminated: ok {rc=0} 20:13:09.075907 --- ParallelTerminationStrategy: PID 26268 died... 20:13:09.129654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26268): Terminated: ok {rc=0} 20:13:09.139203 --- ParallelTerminationStrategy: PID 26271 died... 20:13:09.192928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26271): Terminated: ok {rc=0} 20:13:09.280880 bus /gobi_0: Setting Powered False 20:13:10.385221 bus /gobi_0: Setting Powered False 20:13:11.497546 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26269): Process ended prematurely: osmo-stp_10.42.42.5(pid=26269) [trial-2394↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26269)]