Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28306): Process ended prematurely: osmo-stp_10.42.42.5(pid=28306) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28306)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:30:37.816369 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:37.827645 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:30:37.997606 tst cs_paging_gprs_active.py: using LAC 36087 20:30:38.126925 tst cs_paging_gprs_active.py: using RAC 132 20:30:38.254464 tst cs_paging_gprs_active.py: using CellId 36087 20:30:38.385193 tst cs_paging_gprs_active.py: using BVCI 36088 20:30:38.410599 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.421931 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.433213 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.444303 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.455424 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.466652 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.477860 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.488912 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:30:38.500247 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:30:38.622861 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:30:38.908727 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:30:39.037923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:39.358196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Launched 20:30:39.624638 run iperf3-srv_10.42.42.10(pid=28297): Launched 20:30:39.812542 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:30:39.941049 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:40.261641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28298): Launched 20:30:40.529914 run iperf3-srv_10.42.42.10(pid=28299): Launched 20:30:40.717371 tst cs_paging_gprs_active.py:38: start network... 20:30:40.845745 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:30:41.331202 run create_hlr_db(pid=28300): Launched 20:30:41.508431 bus /gobi_6: Setting Powered False 20:30:42.530605 run create_hlr_db(pid=28300): Terminated: ok {rc=0} 20:30:42.970160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28302): Launched 20:30:43.302818 run osmo-hlr_10.42.42.2(pid=28303): Launched 20:30:43.423821 run osmo-stp_10.42.42.5: Starting osmo-stp 20:30:43.998241 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28305): Launched 20:30:44.329563 run osmo-stp_10.42.42.5(pid=28306): Launched 20:30:44.449715 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:30:45.024183 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28308): Launched 20:30:45.141684 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:30:45.431806 run patchelf(pid=28309): Launched 20:30:45.624188 run osmo-stp_10.42.42.5(pid=28306): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28306)] 20:30:45.764372 run osmo-stp_10.42.42.5(pid=28306): stdout: | (launched: 2022-12-13_20:30:44.166655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:45.915708 run osmo-stp_10.42.42.5(pid=28306): stderr: | �[0;m�[38;5;43m20221213203044357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203044358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203044358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203044358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:46.055000 run osmo-stp_10.42.42.5(pid=28306): stdout: | (launched: 2022-12-13_20:30:44.166655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:46.193289 run osmo-stp_10.42.42.5(pid=28306): stderr: | �[0;m�[38;5;43m20221213203044357 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203044358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203044358 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203044358 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203044359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:46.355008 run patchelf(pid=28309): Terminating (SIGINT) 20:30:46.544558 run patchelf(pid=28309): Terminated: ok {rc=0} 20:30:46.580467 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28306): Process ended prematurely: osmo-stp_10.42.42.5(pid=28306) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28306)] [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:30:46.591572 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:30:46.656669 run osmo-hlr_10.42.42.2(pid=28303): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28303)] 20:30:46.709642 run osmo-hlr_10.42.42.2(pid=28303): stdout: | (launched: 2022-12-13_20:30:43.139131) 20:30:46.763328 run osmo-hlr_10.42.42.2(pid=28303): stderr: | �[0;m�[1;31m20221213203043334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213203043335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213203043335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213203043335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213203043335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213203043335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213203043347 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213203043356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213203043356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213203043356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:30:46.809542 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Terminating (SIGTERM) 20:30:46.854374 run iperf3-srv_10.42.42.10(pid=28297): Terminating (SIGTERM) 20:30:46.899731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28298): Terminating (SIGTERM) 20:30:46.943329 run iperf3-srv_10.42.42.10(pid=28299): Terminating (SIGTERM) 20:30:46.989267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28302): Terminating (SIGTERM) 20:30:47.032141 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28305): Terminating (SIGTERM) 20:30:47.075818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28308): Terminating (SIGTERM) 20:30:47.085643 --- ParallelTerminationStrategy: PID 28296 died... 20:30:47.144085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28296): Terminated: ok {rc=0} 20:30:47.154653 --- ParallelTerminationStrategy: PID 28297 died... 20:30:47.210770 run iperf3-srv_10.42.42.10(pid=28297): Terminated {rc=256} 20:30:47.220779 --- ParallelTerminationStrategy: PID 28298 died... 20:30:47.277372 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28298): Terminated: ok {rc=0} 20:30:47.287437 --- ParallelTerminationStrategy: PID 28299 died... 20:30:47.343631 run iperf3-srv_10.42.42.10(pid=28299): Terminated {rc=256} 20:30:47.353780 --- ParallelTerminationStrategy: PID 28302 died... 20:30:47.410102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28302): Terminated: ok {rc=0} 20:30:47.420140 --- ParallelTerminationStrategy: PID 28305 died... 20:30:47.476278 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28305): Terminated: ok {rc=0} 20:30:47.486435 --- ParallelTerminationStrategy: PID 28308 died... 20:30:47.542615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28308): Terminated: ok {rc=0} 20:30:47.630692 bus /gobi_0: Setting Powered False 20:30:48.738044 bus /gobi_0: Setting Powered False 20:30:49.846313 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28306): Process ended prematurely: osmo-stp_10.42.42.5(pid=28306) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28306)]