Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28360): Process ended prematurely: osmo-stp_10.42.42.5(pid=28360) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28360)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-b200+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 20:31:28.839534 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:28.851477 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:31:29.019797 tst ping_idle_ping.py: using LAC 36091 20:31:29.146579 tst ping_idle_ping.py: using RAC 136 20:31:29.273380 tst ping_idle_ping.py: using CellId 36091 20:31:29.401452 tst ping_idle_ping.py: using BVCI 36092 20:31:29.426773 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.438287 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.449533 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.461022 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.472180 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.483430 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.494745 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:31:29.506088 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:31:29.787294 tst ping_idle_ping.py:24: start network... 20:31:29.913719 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:31:30.403348 run create_hlr_db(pid=28354): Launched 20:31:30.577785 bus /gobi_6: Setting Powered False 20:31:31.602284 run create_hlr_db(pid=28354): Terminated: ok {rc=0} 20:31:32.066805 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28356): Launched 20:31:32.414370 run osmo-hlr_10.42.42.2(pid=28357): Launched 20:31:32.533705 run osmo-stp_10.42.42.5: Starting osmo-stp 20:31:33.099308 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28359): Launched 20:31:33.425812 run osmo-stp_10.42.42.5(pid=28360): Launched 20:31:33.543507 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:31:34.111285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28362): Launched 20:31:34.226180 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:31:34.511328 run patchelf(pid=28363): Launched 20:31:34.700269 run osmo-stp_10.42.42.5(pid=28360): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28360)] 20:31:34.838380 run osmo-stp_10.42.42.5(pid=28360): stdout: | (launched: 2022-12-13_20:31:33.264060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:34.976067 run osmo-stp_10.42.42.5(pid=28360): stderr: | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203133456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:35.110316 run osmo-stp_10.42.42.5(pid=28360): stdout: | (launched: 2022-12-13_20:31:33.264060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:31:35.243378 run osmo-stp_10.42.42.5(pid=28360): stderr: | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213203133455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213203133456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213203133456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:31:35.398206 run patchelf(pid=28363): Terminating (SIGINT) 20:31:35.580211 run patchelf(pid=28363): Terminated: ok {rc=0} 20:31:35.613061 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28360): Process ended prematurely: osmo-stp_10.42.42.5(pid=28360) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28360)] [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 20:31:35.622266 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 20:31:35.685045 run osmo-hlr_10.42.42.2(pid=28357): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28357)] 20:31:35.736580 run osmo-hlr_10.42.42.2(pid=28357): stdout: | (launched: 2022-12-13_20:31:32.251656) 20:31:35.788647 run osmo-hlr_10.42.42.2(pid=28357): stderr: | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213203132449 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213203132466 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-b200+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213203132476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213203132476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213203132477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:31:35.833292 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28356): Terminating (SIGTERM) 20:31:35.875127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28359): Terminating (SIGTERM) 20:31:35.917499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28362): Terminating (SIGTERM) 20:31:35.927088 --- ParallelTerminationStrategy: PID 28356 died... 20:31:35.982987 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28356): Terminated: ok {rc=0} 20:31:35.993071 --- ParallelTerminationStrategy: PID 28359 died... 20:31:36.048568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28359): Terminated: ok {rc=0} 20:31:36.058513 --- ParallelTerminationStrategy: PID 28362 died... 20:31:36.114220 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28362): Terminated: ok {rc=0} 20:31:36.202547 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28360): Process ended prematurely: osmo-stp_10.42.42.5(pid=28360) [trial-2394↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28360)]