Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28234): Process ended prematurely: osmo-stp_10.42.42.5(pid=28234) [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28234)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:29:37.430193 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:37.440892 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:29:37.587759 tst cs_paging_gprs_active.py: using LAC 36082 20:29:37.718166 tst cs_paging_gprs_active.py: using RAC 127 20:29:37.846589 tst cs_paging_gprs_active.py: using CellId 36082 20:29:37.978193 tst cs_paging_gprs_active.py: using BVCI 36083 20:29:38.003412 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.014855 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.025993 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.037115 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.048194 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.059248 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.070525 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.081581 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:29:38.092832 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:29:38.212112 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:29:38.512032 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:29:38.650337 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:38.992770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28224): Launched 20:29:39.279168 run iperf3-srv_10.42.42.10(pid=28225): Launched 20:29:39.482287 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:29:39.620883 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:29:39.965702 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28226): Launched 20:29:40.251534 run iperf3-srv_10.42.42.10(pid=28227): Launched 20:29:40.454649 tst cs_paging_gprs_active.py:38: start network... 20:29:40.592391 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:29:41.121028 run create_hlr_db(pid=28228): Launched 20:29:41.310750 bus /gobi_6: Setting Powered False 20:29:42.332157 run create_hlr_db(pid=28228): Terminated: ok {rc=0} 20:29:42.746082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28230): Launched 20:29:43.054446 run osmo-hlr_10.42.42.2(pid=28231): Launched 20:29:43.172440 run osmo-stp_10.42.42.5: Starting osmo-stp 20:29:43.716416 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28233): Launched 20:29:44.027238 run osmo-stp_10.42.42.5(pid=28234): Launched 20:29:44.139438 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:29:44.675407 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28236): Launched 20:29:44.785129 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:29:45.054872 run patchelf(pid=28237): Launched 20:29:45.234700 run osmo-stp_10.42.42.5(pid=28234): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28234)] 20:29:45.366296 run osmo-stp_10.42.42.5(pid=28234): stdout: | (launched: 2022-12-13_20:29:43.873143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:45.498175 run osmo-stp_10.42.42.5(pid=28234): stderr: | �[0;m�[38;5;43m20221213202944043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202944043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202944044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202944044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202944044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202944045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202944045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:45.627014 run osmo-stp_10.42.42.5(pid=28234): stdout: | (launched: 2022-12-13_20:29:43.873143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:29:45.754122 run osmo-stp_10.42.42.5(pid=28234): stderr: | �[0;m�[38;5;43m20221213202944043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213202944043 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213202944044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213202944044 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213202944044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213202944045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213202944045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:29:45.928166 run patchelf(pid=28237): Terminating (SIGINT) 20:29:46.110236 run patchelf(pid=28237): Terminated: ok {rc=0} 20:29:46.143934 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28234): Process ended prematurely: osmo-stp_10.42.42.5(pid=28234) [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28234)] [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:29:46.154584 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:29:46.219461 run osmo-hlr_10.42.42.2(pid=28231): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28231)] 20:29:46.271894 run osmo-hlr_10.42.42.2(pid=28231): stdout: | (launched: 2022-12-13_20:29:42.902702) 20:29:46.324883 run osmo-hlr_10.42.42.2(pid=28231): stderr: | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213202943079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213202943104 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213202943114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213202943115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213202943115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:29:46.370358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28224): Terminating (SIGTERM) 20:29:46.414940 run iperf3-srv_10.42.42.10(pid=28225): Terminating (SIGTERM) 20:29:46.459791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28226): Terminating (SIGTERM) 20:29:46.504421 run iperf3-srv_10.42.42.10(pid=28227): Terminating (SIGTERM) 20:29:46.549327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28230): Terminating (SIGTERM) 20:29:46.592638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28233): Terminating (SIGTERM) 20:29:46.635155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28236): Terminating (SIGTERM) 20:29:46.645033 --- ParallelTerminationStrategy: PID 28224 died... 20:29:46.702752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28224): Terminated: ok {rc=0} 20:29:46.713342 --- ParallelTerminationStrategy: PID 28225 died... 20:29:46.770436 run iperf3-srv_10.42.42.10(pid=28225): Terminated {rc=256} 20:29:46.780930 --- ParallelTerminationStrategy: PID 28226 died... 20:29:46.838550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28226): Terminated: ok {rc=0} 20:29:46.849193 --- ParallelTerminationStrategy: PID 28227 died... 20:29:46.906193 run iperf3-srv_10.42.42.10(pid=28227): Terminated {rc=256} 20:29:46.916784 --- ParallelTerminationStrategy: PID 28230 died... 20:29:46.974195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28230): Terminated: ok {rc=0} 20:29:46.984847 --- ParallelTerminationStrategy: PID 28233 died... 20:29:47.042488 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28233): Terminated: ok {rc=0} 20:29:47.053128 --- ParallelTerminationStrategy: PID 28236 died... 20:29:47.110347 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28236): Terminated: ok {rc=0} 20:29:47.198505 bus /gobi_0: Setting Powered False 20:29:48.306645 bus /gobi_0: Setting Powered False 20:29:49.420169 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28234): Process ended prematurely: osmo-stp_10.42.42.5(pid=28234) [trial-2394↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28234)]