Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31148): Process ended prematurely: osmo-stp_10.42.42.5(pid=31148) [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31148)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:55:45.756828 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:45.768032 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:55:45.923252 tst cs_paging_gprs_active.py: using LAC 36220 20:55:46.060092 tst cs_paging_gprs_active.py: using RAC 10 20:55:46.222835 tst cs_paging_gprs_active.py: using CellId 36220 20:55:46.378535 tst cs_paging_gprs_active.py: using BVCI 36221 20:55:46.411350 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.425702 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.440385 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.454593 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.467576 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.480287 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.493670 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.506800 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:55:46.520040 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:55:46.648786 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:55:46.940697 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:55:47.111232 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:55:47.442432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31136): Launched 20:55:47.704528 run iperf3-srv_10.42.42.10(pid=31137): Launched 20:55:47.888596 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:55:48.014959 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:55:48.328112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31138): Launched 20:55:48.587857 run iperf3-srv_10.42.42.10(pid=31139): Launched 20:55:48.771379 tst cs_paging_gprs_active.py:38: start network... 20:55:48.897084 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:55:49.372748 run create_hlr_db(pid=31140): Launched 20:55:49.546012 bus /gobi_6: Setting Powered False 20:55:50.569352 run create_hlr_db(pid=31140): Terminated: ok {rc=0} 20:55:50.969681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31142): Launched 20:55:51.271844 run osmo-hlr_10.42.42.2(pid=31143): Launched 20:55:51.388761 run osmo-stp_10.42.42.5: Starting osmo-stp 20:55:51.919820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31145): Launched 20:55:52.224049 run osmo-stp_10.42.42.5(pid=31148): Launched 20:55:52.334743 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:55:52.859936 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31150): Launched 20:55:52.967227 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:55:53.228869 run patchelf(pid=31151): Launched 20:55:53.407371 run osmo-stp_10.42.42.5(pid=31148): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31148)] 20:55:53.536386 run osmo-stp_10.42.42.5(pid=31148): stdout: | (launched: 2022-12-13_20:55:52.074971) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:55:53.665759 run osmo-stp_10.42.42.5(pid=31148): stderr: | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205552241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:55:53.790669 run osmo-stp_10.42.42.5(pid=31148): stdout: | (launched: 2022-12-13_20:55:52.074971) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:55:53.914990 run osmo-stp_10.42.42.5(pid=31148): stderr: | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213205552240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213205552241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213205552241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:55:54.060169 run patchelf(pid=31151): Terminating (SIGINT) 20:55:54.231270 run patchelf(pid=31151): Terminated: ok {rc=0} 20:55:54.262501 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31148): Process ended prematurely: osmo-stp_10.42.42.5(pid=31148) [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31148)] [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:55:54.271675 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:55:54.332303 run osmo-hlr_10.42.42.2(pid=31143): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31143)] 20:55:54.381502 run osmo-hlr_10.42.42.2(pid=31143): stdout: | (launched: 2022-12-13_20:55:51.122854) 20:55:54.431777 run osmo-hlr_10.42.42.2(pid=31143): stderr: | �[0;m�[1;31m20221213205551298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213205551299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213205551299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213205551299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213205551299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213205551299 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213205551311 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213205551319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213205551319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213205551320 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:55:54.474158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31136): Terminating (SIGTERM) 20:55:54.513850 run iperf3-srv_10.42.42.10(pid=31137): Terminating (SIGTERM) 20:55:54.553769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31138): Terminating (SIGTERM) 20:55:54.593375 run iperf3-srv_10.42.42.10(pid=31139): Terminating (SIGTERM) 20:55:54.633587 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31142): Terminating (SIGTERM) 20:55:54.673460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31145): Terminating (SIGTERM) 20:55:54.713425 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31150): Terminating (SIGTERM) 20:55:54.722638 --- ParallelTerminationStrategy: PID 31136 died... 20:55:54.776490 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31136): Terminated: ok {rc=0} 20:55:54.786088 --- ParallelTerminationStrategy: PID 31137 died... 20:55:54.840182 run iperf3-srv_10.42.42.10(pid=31137): Terminated {rc=256} 20:55:54.849843 --- ParallelTerminationStrategy: PID 31138 died... 20:55:54.903695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31138): Terminated: ok {rc=0} 20:55:54.913344 --- ParallelTerminationStrategy: PID 31139 died... 20:55:54.966762 run iperf3-srv_10.42.42.10(pid=31139): Terminated {rc=256} 20:55:54.976248 --- ParallelTerminationStrategy: PID 31142 died... 20:55:55.029931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31142): Terminated: ok {rc=0} 20:55:55.039581 --- ParallelTerminationStrategy: PID 31145 died... 20:55:55.093057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31145): Terminated: ok {rc=0} 20:55:55.102588 --- ParallelTerminationStrategy: PID 31150 died... 20:55:55.156160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31150): Terminated: ok {rc=0} 20:55:55.240344 bus /gobi_0: Setting Powered False 20:55:56.348734 bus /gobi_0: Setting Powered False 20:55:57.459306 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31148): Process ended prematurely: osmo-stp_10.42.42.5(pid=31148) [trial-2394↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31148)]