Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29273): Process ended prematurely: osmo-stp_10.42.42.5(pid=29273) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29273)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:40:36.221280 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.232640 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:40:36.400342 tst cs_paging_gprs_active.py: using LAC 36139 20:40:36.530317 tst cs_paging_gprs_active.py: using RAC 184 20:40:36.658077 tst cs_paging_gprs_active.py: using CellId 36139 20:40:36.786877 tst cs_paging_gprs_active.py: using BVCI 36140 20:40:36.810460 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.821627 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.832509 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.843501 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.854940 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.866115 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.877364 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.888348 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:40:36.899611 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:40:37.018183 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:40:37.315865 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:40:37.452020 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:40:37.788174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29263): Launched 20:40:38.069342 run iperf3-srv_10.42.42.10(pid=29264): Launched 20:40:38.268929 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:40:38.405150 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:40:38.742787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29265): Launched 20:40:39.023356 run iperf3-srv_10.42.42.10(pid=29266): Launched 20:40:39.223616 tst cs_paging_gprs_active.py:38: start network... 20:40:39.360074 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:40:39.883118 run create_hlr_db(pid=29267): Launched 20:40:40.071107 bus /gobi_6: Setting Powered False 20:40:41.091725 run create_hlr_db(pid=29267): Terminated: ok {rc=0} 20:40:41.500414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29269): Launched 20:40:41.806582 run osmo-hlr_10.42.42.2(pid=29270): Launched 20:40:41.925779 run osmo-stp_10.42.42.5: Starting osmo-stp 20:40:42.462437 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29272): Launched 20:40:42.767761 run osmo-stp_10.42.42.5(pid=29273): Launched 20:40:42.879029 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:40:43.409365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29275): Launched 20:40:43.517642 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:40:43.784756 run patchelf(pid=29276): Launched 20:40:43.962832 run osmo-stp_10.42.42.5(pid=29273): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29273)] 20:40:44.093599 run osmo-stp_10.42.42.5(pid=29273): stdout: | (launched: 2022-12-13_20:40:42.617766) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:44.224500 run osmo-stp_10.42.42.5(pid=29273): stderr: | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204042786 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:44.351333 run osmo-stp_10.42.42.5(pid=29273): stdout: | (launched: 2022-12-13_20:40:42.617766) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:44.476900 run osmo-stp_10.42.42.5(pid=29273): stderr: | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204042785 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204042786 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204042786 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:44.623602 run patchelf(pid=29276): Terminating (SIGINT) 20:40:44.796810 run patchelf(pid=29276): Terminated: ok {rc=0} 20:40:44.828546 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29273): Process ended prematurely: osmo-stp_10.42.42.5(pid=29273) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29273)] [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:40:44.837870 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:40:44.898708 run osmo-hlr_10.42.42.2(pid=29270): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29270)] 20:40:44.948346 run osmo-hlr_10.42.42.2(pid=29270): stdout: | (launched: 2022-12-13_20:40:41.656134) 20:40:44.998485 run osmo-hlr_10.42.42.2(pid=29270): stderr: | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213204041832 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213204041844 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213204041853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213204041854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213204041854 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:40:45.041533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29263): Terminating (SIGTERM) 20:40:45.081741 run iperf3-srv_10.42.42.10(pid=29264): Terminating (SIGTERM) 20:40:45.124878 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29265): Terminating (SIGTERM) 20:40:45.165455 run iperf3-srv_10.42.42.10(pid=29266): Terminating (SIGTERM) 20:40:45.205892 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29269): Terminating (SIGTERM) 20:40:45.246288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29272): Terminating (SIGTERM) 20:40:45.286550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29275): Terminating (SIGTERM) 20:40:45.295796 --- ParallelTerminationStrategy: PID 29263 died... 20:40:45.350066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29263): Terminated: ok {rc=0} 20:40:45.359667 --- ParallelTerminationStrategy: PID 29264 died... 20:40:45.413351 run iperf3-srv_10.42.42.10(pid=29264): Terminated {rc=256} 20:40:45.422933 --- ParallelTerminationStrategy: PID 29265 died... 20:40:45.476716 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29265): Terminated: ok {rc=0} 20:40:45.486370 --- ParallelTerminationStrategy: PID 29266 died... 20:40:45.540089 run iperf3-srv_10.42.42.10(pid=29266): Terminated {rc=256} 20:40:45.550006 --- ParallelTerminationStrategy: PID 29269 died... 20:40:45.603676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29269): Terminated: ok {rc=0} 20:40:45.613383 --- ParallelTerminationStrategy: PID 29272 died... 20:40:45.667063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29272): Terminated: ok {rc=0} 20:40:45.676635 --- ParallelTerminationStrategy: PID 29275 died... 20:40:45.730353 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29275): Terminated: ok {rc=0} 20:40:45.814423 bus /gobi_0: Setting Powered False 20:40:46.924767 bus /gobi_0: Setting Powered False 20:40:48.033017 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29273): Process ended prematurely: osmo-stp_10.42.42.5(pid=29273) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29273)]