Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10677): Process ended prematurely: osmo-stp_10.42.42.5(pid=10677) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10677)]
Standard Output
---------------------------------------------- trial-2395 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 22:56:50.965569 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:50.977517 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:56:51.132487 tst ping_idle_ping.py: using LAC 36803 22:56:51.251981 tst ping_idle_ping.py: using RAC 83 22:56:51.371273 tst ping_idle_ping.py: using CellId 36803 22:56:51.490626 tst ping_idle_ping.py: using BVCI 36804 22:56:51.513604 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.524486 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.535223 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.545981 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.556629 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.567741 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.578771 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:51.589618 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:56:51.867016 tst ping_idle_ping.py:24: start network... 22:56:51.991628 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:56:52.473178 run create_hlr_db(pid=10671): Launched 22:56:52.645657 bus /gobi_6: Setting Powered False 22:56:53.667923 run create_hlr_db(pid=10671): Terminated: ok {rc=0} 22:56:54.067276 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10673): Launched 22:56:54.366961 run osmo-hlr_10.42.42.2(pid=10674): Launched 22:56:54.483452 run osmo-stp_10.42.42.5: Starting osmo-stp 22:56:55.008834 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10676): Launched 22:56:55.308650 run osmo-stp_10.42.42.5(pid=10677): Launched 22:56:55.417476 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:56:55.939167 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10679): Launched 22:56:56.044897 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:56:56.305686 run patchelf(pid=10680): Launched 22:56:56.480219 run osmo-stp_10.42.42.5(pid=10677): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10677)] 22:56:56.607636 run osmo-stp_10.42.42.5(pid=10677): stdout: | (launched: 2022-12-13_22:56:55.160448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:56.735127 run osmo-stp_10.42.42.5(pid=10677): stderr: | �[0;m�[38;5;43m20221213225655329 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225655330 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225655330 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225655330 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:56.858467 run osmo-stp_10.42.42.5(pid=10677): stdout: | (launched: 2022-12-13_22:56:55.160448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:56.980522 run osmo-stp_10.42.42.5(pid=10677): stderr: | �[0;m�[38;5;43m20221213225655329 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225655330 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225655330 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225655330 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225655331 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:57.122636 run patchelf(pid=10680): Terminating (SIGINT) 22:56:57.289895 run patchelf(pid=10680): Terminated: ok {rc=0} 22:56:57.320407 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10677): Process ended prematurely: osmo-stp_10.42.42.5(pid=10677) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10677)] [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 22:56:57.328931 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 22:56:57.388918 run osmo-hlr_10.42.42.2(pid=10674): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10674)] 22:56:57.437745 run osmo-hlr_10.42.42.2(pid=10674): stdout: | (launched: 2022-12-13_22:56:54.219419) 22:56:57.486972 run osmo-hlr_10.42.42.2(pid=10674): stderr: | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213225654399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213225654412 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213225654420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213225654421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213225654421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:56:57.529018 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10673): Terminating (SIGTERM) 22:56:57.568521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10676): Terminating (SIGTERM) 22:56:57.608121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10679): Terminating (SIGTERM) 22:56:57.617843 --- ParallelTerminationStrategy: PID 10673 died... 22:56:57.670702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10673): Terminated: ok {rc=0} 22:56:57.680380 --- ParallelTerminationStrategy: PID 10676 died... 22:56:57.732759 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10676): Terminated: ok {rc=0} 22:56:57.742344 --- ParallelTerminationStrategy: PID 10679 died... 22:56:57.794660 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10679): Terminated: ok {rc=0} 22:56:57.878205 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10677): Process ended prematurely: osmo-stp_10.42.42.5(pid=10677) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10677)]