Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7136): Process ended prematurely: osmo-stp_10.42.42.5(pid=7136) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7136)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:17:41.691754 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:41.702982 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:17:41.860522 tst cs_paging_gprs_active.py: using LAC 36595 22:17:41.980010 tst cs_paging_gprs_active.py: using RAC 130 22:17:42.099858 tst cs_paging_gprs_active.py: using CellId 36595 22:17:42.217397 tst cs_paging_gprs_active.py: using BVCI 36596 22:17:42.240282 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.251272 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.262185 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.272804 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.283427 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.294098 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.304903 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.315506 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:17:42.326348 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:17:42.447978 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:17:42.725740 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:17:42.850934 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:17:43.171201 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7126): Launched 22:17:43.448266 run iperf3-srv_10.42.42.10(pid=7127): Launched 22:17:43.646936 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:17:43.782544 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:17:44.116272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7128): Launched 22:17:44.391968 run iperf3-srv_10.42.42.10(pid=7129): Launched 22:17:44.590536 tst cs_paging_gprs_active.py:38: start network... 22:17:44.726641 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:17:45.234804 run create_hlr_db(pid=7130): Launched 22:17:45.421991 bus /gobi_6: Setting Powered False 22:17:46.458271 run create_hlr_db(pid=7130): Terminated: ok {rc=0} 22:17:46.906594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7132): Launched 22:17:47.246880 run osmo-hlr_10.42.42.2(pid=7133): Launched 22:17:47.359898 run osmo-stp_10.42.42.5: Starting osmo-stp 22:17:47.881548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7135): Launched 22:17:48.181822 run osmo-stp_10.42.42.5(pid=7136): Launched 22:17:48.291053 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:17:48.814915 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7138): Launched 22:17:48.922072 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:17:49.185228 run patchelf(pid=7139): Launched 22:17:49.361107 run osmo-stp_10.42.42.5(pid=7136): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7136)] 22:17:49.489912 run osmo-stp_10.42.42.5(pid=7136): stdout: | (launched: 2022-12-13_22:17:48.034395) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:17:49.619561 run osmo-stp_10.42.42.5(pid=7136): stderr: | �[0;m�[38;5;43m20221213221748204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221748204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221748205 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221748205 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:17:49.744014 run osmo-stp_10.42.42.5(pid=7136): stdout: | (launched: 2022-12-13_22:17:48.034395) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:17:49.869164 run osmo-stp_10.42.42.5(pid=7136): stderr: | �[0;m�[38;5;43m20221213221748204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221748204 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221748205 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221748205 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221748206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:17:50.012556 run patchelf(pid=7139): Terminating (SIGINT) 22:17:50.180852 run patchelf(pid=7139): Terminated: ok {rc=0} 22:17:50.211940 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7136): Process ended prematurely: osmo-stp_10.42.42.5(pid=7136) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7136)] [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:17:50.221332 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:17:50.280519 run osmo-hlr_10.42.42.2(pid=7133): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7133)] 22:17:50.328985 run osmo-hlr_10.42.42.2(pid=7133): stdout: | (launched: 2022-12-13_22:17:47.074731) 22:17:50.377968 run osmo-hlr_10.42.42.2(pid=7133): stderr: | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213221747273 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213221747285 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213221747294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213221747294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213221747294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:17:50.419772 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7126): Terminating (SIGTERM) 22:17:50.458895 run iperf3-srv_10.42.42.10(pid=7127): Terminating (SIGTERM) 22:17:50.498286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7128): Terminating (SIGTERM) 22:17:50.537568 run iperf3-srv_10.42.42.10(pid=7129): Terminating (SIGTERM) 22:17:50.576829 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7132): Terminating (SIGTERM) 22:17:50.615889 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7135): Terminating (SIGTERM) 22:17:50.655163 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7138): Terminating (SIGTERM) 22:17:50.664292 --- ParallelTerminationStrategy: PID 7126 died... 22:17:50.716857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7126): Terminated: ok {rc=0} 22:17:50.726573 --- ParallelTerminationStrategy: PID 7127 died... 22:17:50.778703 run iperf3-srv_10.42.42.10(pid=7127): Terminated {rc=256} 22:17:50.788199 --- ParallelTerminationStrategy: PID 7128 died... 22:17:50.840405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7128): Terminated: ok {rc=0} 22:17:50.849854 --- ParallelTerminationStrategy: PID 7129 died... 22:17:50.902160 run iperf3-srv_10.42.42.10(pid=7129): Terminated {rc=256} 22:17:50.911598 --- ParallelTerminationStrategy: PID 7132 died... 22:17:50.963989 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7132): Terminated: ok {rc=0} 22:17:50.973528 --- ParallelTerminationStrategy: PID 7135 died... 22:17:51.026554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7135): Terminated: ok {rc=0} 22:17:51.035988 --- ParallelTerminationStrategy: PID 7138 died... 22:17:51.088463 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7138): Terminated: ok {rc=0} 22:17:51.176441 bus /gobi_0: Setting Powered False 22:17:52.279278 bus /gobi_0: Setting Powered False 22:17:53.388844 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7136): Process ended prematurely: osmo-stp_10.42.42.5(pid=7136) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7136)]