Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13046): Process ended prematurely: osmo-stp_10.42.42.5(pid=13046) [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13046)]
Standard Output
---------------------------------------------- trial-2396 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:26:34.319790 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.330331 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:26:34.452180 tst cs_paging_gprs_active.py: using LAC 36958 23:26:34.569975 tst cs_paging_gprs_active.py: using RAC 238 23:26:34.685302 tst cs_paging_gprs_active.py: using CellId 36958 23:26:34.800834 tst cs_paging_gprs_active.py: using BVCI 36959 23:26:34.823210 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.833925 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.844261 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.854627 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.865382 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.875644 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.886258 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.896862 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:26:34.907783 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:26:35.027612 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:26:35.299979 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:26:35.422221 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:26:35.725574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13036): Launched 23:26:35.977386 run iperf3-srv_10.42.42.10(pid=13037): Launched 23:26:36.155520 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:26:36.277203 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:26:36.580525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13038): Launched 23:26:36.832788 run iperf3-srv_10.42.42.10(pid=13039): Launched 23:26:37.011395 tst cs_paging_gprs_active.py:38: start network... 23:26:37.133781 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:26:37.604651 run create_hlr_db(pid=13040): Launched 23:26:37.774226 bus /gobi_6: Setting Powered False 23:26:38.796196 run create_hlr_db(pid=13040): Terminated: ok {rc=0} 23:26:39.211355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13042): Launched 23:26:39.525586 run osmo-hlr_10.42.42.2(pid=13043): Launched 23:26:39.642063 run osmo-stp_10.42.42.5: Starting osmo-stp 23:26:40.189660 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13045): Launched 23:26:40.503835 run osmo-stp_10.42.42.5(pid=13046): Launched 23:26:40.619770 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:26:41.166676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13048): Launched 23:26:41.279675 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:26:41.552891 run patchelf(pid=13049): Launched 23:26:41.738260 run osmo-stp_10.42.42.5(pid=13046): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13046)] 23:26:41.873677 run osmo-stp_10.42.42.5(pid=13046): stdout: | (launched: 2022-12-13_23:26:40.349975) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:26:42.009652 run osmo-stp_10.42.42.5(pid=13046): stderr: | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232640541 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:26:42.140654 run osmo-stp_10.42.42.5(pid=13046): stdout: | (launched: 2022-12-13_23:26:40.349975) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:26:42.270532 run osmo-stp_10.42.42.5(pid=13046): stderr: | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232640540 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232640541 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232640541 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:26:42.421691 run patchelf(pid=13049): Terminating (SIGINT) 23:26:42.598678 run patchelf(pid=13049): Terminated: ok {rc=0} 23:26:42.631070 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13046): Process ended prematurely: osmo-stp_10.42.42.5(pid=13046) [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13046)] [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:26:42.640787 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 23:26:42.703763 run osmo-hlr_10.42.42.2(pid=13043): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13043)] 23:26:42.755000 run osmo-hlr_10.42.42.2(pid=13043): stdout: | (launched: 2022-12-13_23:26:39.371332) 23:26:42.806644 run osmo-hlr_10.42.42.2(pid=13043): stderr: | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213232639569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213232639581 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213232639589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213232639589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213232639590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:26:42.851015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13036): Terminating (SIGTERM) 23:26:42.892788 run iperf3-srv_10.42.42.10(pid=13037): Terminating (SIGTERM) 23:26:42.934609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13038): Terminating (SIGTERM) 23:26:42.976551 run iperf3-srv_10.42.42.10(pid=13039): Terminating (SIGTERM) 23:26:43.018682 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13042): Terminating (SIGTERM) 23:26:43.060041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13045): Terminating (SIGTERM) 23:26:43.101662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13048): Terminating (SIGTERM) 23:26:43.111273 --- ParallelTerminationStrategy: PID 13036 died... 23:26:43.167528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13036): Terminated: ok {rc=0} 23:26:43.177495 --- ParallelTerminationStrategy: PID 13037 died... 23:26:43.233145 run iperf3-srv_10.42.42.10(pid=13037): Terminated {rc=256} 23:26:43.242881 --- ParallelTerminationStrategy: PID 13038 died... 23:26:43.298834 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13038): Terminated: ok {rc=0} 23:26:43.308707 --- ParallelTerminationStrategy: PID 13039 died... 23:26:43.364369 run iperf3-srv_10.42.42.10(pid=13039): Terminated {rc=256} 23:26:43.374234 --- ParallelTerminationStrategy: PID 13042 died... 23:26:43.429908 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13042): Terminated: ok {rc=0} 23:26:43.439752 --- ParallelTerminationStrategy: PID 13045 died... 23:26:43.495269 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13045): Terminated: ok {rc=0} 23:26:43.505214 --- ParallelTerminationStrategy: PID 13048 died... 23:26:43.560802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13048): Terminated: ok {rc=0} 23:26:43.647045 bus /gobi_0: Setting Powered False 23:26:44.752471 bus /gobi_0: Setting Powered False 23:26:45.860859 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13046): Process ended prematurely: osmo-stp_10.42.42.5(pid=13046) [trial-2396↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13046)]