Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=23269): Process ended prematurely: osmo-stp_10.42.42.5(pid=23269) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23269)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:20:52.215204 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.226713 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:20:52.374394 tst cs_paging_gprs_active.py: using LAC 37556 01:20:52.502912 tst cs_paging_gprs_active.py: using RAC 71 01:20:52.631443 tst cs_paging_gprs_active.py: using CellId 37556 01:20:52.754461 tst cs_paging_gprs_active.py: using BVCI 37557 01:20:52.777915 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.788919 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.799755 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.810967 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.822357 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.833281 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.844170 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.854895 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:20:52.865884 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:20:52.981316 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:20:53.266315 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:20:53.393069 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:20:53.709996 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23259): Launched 01:20:53.972711 run iperf3-srv_10.42.42.10(pid=23260): Launched 01:20:54.158397 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:20:54.285621 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:20:54.604182 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23261): Launched 01:20:54.868595 run iperf3-srv_10.42.42.10(pid=23262): Launched 01:20:55.054799 tst cs_paging_gprs_active.py:38: start network... 01:20:55.181847 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:20:55.671345 run create_hlr_db(pid=23263): Launched 01:20:55.845707 bus /gobi_6: Setting Powered False 01:20:56.867239 run create_hlr_db(pid=23263): Terminated: ok {rc=0} 01:20:57.272671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23265): Launched 01:20:57.577302 run osmo-hlr_10.42.42.2(pid=23266): Launched 01:20:57.694094 run osmo-stp_10.42.42.5: Starting osmo-stp 01:20:58.231081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23268): Launched 01:20:58.535122 run osmo-stp_10.42.42.5(pid=23269): Launched 01:20:58.644395 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:20:59.172594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23271): Launched 01:20:59.280376 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:20:59.544648 run patchelf(pid=23272): Launched 01:20:59.722099 run osmo-stp_10.42.42.5(pid=23269): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23269)] 01:20:59.851722 run osmo-stp_10.42.42.5(pid=23269): stdout: | (launched: 2022-12-14_01:20:58.385150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:20:59.981429 run osmo-stp_10.42.42.5(pid=23269): stderr: | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012058551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:00.106718 run osmo-stp_10.42.42.5(pid=23269): stdout: | (launched: 2022-12-14_01:20:58.385150) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:21:00.230632 run osmo-stp_10.42.42.5(pid=23269): stderr: | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012058551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012058551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012058552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:00.375491 run patchelf(pid=23272): Terminating (SIGINT) 01:21:00.545701 run patchelf(pid=23272): Terminated: ok {rc=0} 01:21:00.576691 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23269): Process ended prematurely: osmo-stp_10.42.42.5(pid=23269) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23269)] [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:21:00.585763 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 01:21:00.644582 run osmo-hlr_10.42.42.2(pid=23266): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23266)] 01:21:00.692861 run osmo-hlr_10.42.42.2(pid=23266): stdout: | (launched: 2022-12-14_01:20:57.426756) 01:21:00.741698 run osmo-hlr_10.42.42.2(pid=23266): stderr: | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214012057601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214012057613 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214012057623 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214012057623 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214012057624 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:21:00.783149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23259): Terminating (SIGTERM) 01:21:00.822185 run iperf3-srv_10.42.42.10(pid=23260): Terminating (SIGTERM) 01:21:00.873140 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23261): Terminating (SIGTERM) 01:21:00.912873 run iperf3-srv_10.42.42.10(pid=23262): Terminating (SIGTERM) 01:21:00.953156 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23265): Terminating (SIGTERM) 01:21:00.993025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23268): Terminating (SIGTERM) 01:21:01.032879 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23271): Terminating (SIGTERM) 01:21:01.042883 --- ParallelTerminationStrategy: PID 23259 died... 01:21:01.098262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23259): Terminated: ok {rc=0} 01:21:01.108268 --- ParallelTerminationStrategy: PID 23260 died... 01:21:01.163521 run iperf3-srv_10.42.42.10(pid=23260): Terminated {rc=256} 01:21:01.173934 --- ParallelTerminationStrategy: PID 23261 died... 01:21:01.230190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23261): Terminated: ok {rc=0} 01:21:01.240595 --- ParallelTerminationStrategy: PID 23262 died... 01:21:01.295587 run iperf3-srv_10.42.42.10(pid=23262): Terminated {rc=256} 01:21:01.306082 --- ParallelTerminationStrategy: PID 23265 died... 01:21:01.360024 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23265): Terminated: ok {rc=0} 01:21:01.370081 --- ParallelTerminationStrategy: PID 23268 died... 01:21:01.423440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23268): Terminated: ok {rc=0} 01:21:01.433516 --- ParallelTerminationStrategy: PID 23271 died... 01:21:01.486999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23271): Terminated: ok {rc=0} 01:21:01.571058 bus /gobi_0: Setting Powered False 01:21:02.671143 bus /gobi_0: Setting Powered False 01:21:03.781931 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23269): Process ended prematurely: osmo-stp_10.42.42.5(pid=23269) [trial-2397↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23269)]