Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21274): Process ended prematurely: osmo-stp_10.42.42.5(pid=21274) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21274)]
Standard Output
---------------------------------------------- trial-2397 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:56:06.105564 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.116942 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:56:06.268932 tst cs_paging_gprs_active.py: using LAC 37424 00:56:06.399826 tst cs_paging_gprs_active.py: using RAC 194 00:56:06.529500 tst cs_paging_gprs_active.py: using CellId 37424 00:56:06.657300 tst cs_paging_gprs_active.py: using BVCI 37425 00:56:06.682487 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.693890 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.704866 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.716011 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.727351 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.738773 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.750642 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.761924 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:56:06.773474 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:56:06.890841 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:56:07.189659 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:56:07.326769 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:07.670496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21264): Launched 00:56:07.953707 run iperf3-srv_10.42.42.10(pid=21265): Launched 00:56:08.155622 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:56:08.292582 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:08.637789 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21266): Launched 00:56:08.921497 run iperf3-srv_10.42.42.10(pid=21267): Launched 00:56:09.124205 tst cs_paging_gprs_active.py:38: start network... 00:56:09.262124 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:56:09.780434 run create_hlr_db(pid=21268): Launched 00:56:09.970128 bus /gobi_6: Setting Powered False 00:56:10.990980 run create_hlr_db(pid=21268): Terminated: ok {rc=0} 00:56:11.431273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21270): Launched 00:56:11.762569 run osmo-hlr_10.42.42.2(pid=21271): Launched 00:56:11.886028 run osmo-stp_10.42.42.5: Starting osmo-stp 00:56:12.458766 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21273): Launched 00:56:12.767955 run osmo-stp_10.42.42.5(pid=21274): Launched 00:56:12.880619 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:56:13.419197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21276): Launched 00:56:13.527856 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:56:13.796382 run patchelf(pid=21277): Launched 00:56:13.976069 run osmo-stp_10.42.42.5(pid=21274): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21274)] 00:56:14.107391 run osmo-stp_10.42.42.5(pid=21274): stdout: | (launched: 2022-12-14_00:56:12.615196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:14.239172 run osmo-stp_10.42.42.5(pid=21274): stderr: | �[0;m�[38;5;43m20221214005612786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005612786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005612787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005612787 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005612787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005612787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005612788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:14.365750 run osmo-stp_10.42.42.5(pid=21274): stdout: | (launched: 2022-12-14_00:56:12.615196) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:14.492063 run osmo-stp_10.42.42.5(pid=21274): stderr: | �[0;m�[38;5;43m20221214005612786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214005612786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214005612787 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214005612787 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214005612787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214005612787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214005612788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:14.639237 run patchelf(pid=21277): Terminating (SIGINT) 00:56:14.811650 run patchelf(pid=21277): Terminated: ok {rc=0} 00:56:14.843310 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21274): Process ended prematurely: osmo-stp_10.42.42.5(pid=21274) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21274)] [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:56:14.852376 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:56:14.912080 run osmo-hlr_10.42.42.2(pid=21271): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21271)] 00:56:14.960571 run osmo-hlr_10.42.42.2(pid=21271): stdout: | (launched: 2022-12-14_00:56:11.598474) 00:56:15.009962 run osmo-hlr_10.42.42.2(pid=21271): stderr: | �[0;m�[1;31m20221214005611797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214005611797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214005611797 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214005611798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214005611798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214005611798 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214005611810 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214005611818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214005611818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214005611818 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:56:15.051776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21264): Terminating (SIGTERM) 00:56:15.091050 run iperf3-srv_10.42.42.10(pid=21265): Terminating (SIGTERM) 00:56:15.130474 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21266): Terminating (SIGTERM) 00:56:15.169834 run iperf3-srv_10.42.42.10(pid=21267): Terminating (SIGTERM) 00:56:15.209379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21270): Terminating (SIGTERM) 00:56:15.248765 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21273): Terminating (SIGTERM) 00:56:15.288090 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21276): Terminating (SIGTERM) 00:56:15.297153 --- ParallelTerminationStrategy: PID 21264 died... 00:56:15.349943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21264): Terminated: ok {rc=0} 00:56:15.359249 --- ParallelTerminationStrategy: PID 21265 died... 00:56:15.411343 run iperf3-srv_10.42.42.10(pid=21265): Terminated {rc=256} 00:56:15.420647 --- ParallelTerminationStrategy: PID 21266 died... 00:56:15.472640 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21266): Terminated: ok {rc=0} 00:56:15.481926 --- ParallelTerminationStrategy: PID 21267 died... 00:56:15.533871 run iperf3-srv_10.42.42.10(pid=21267): Terminated {rc=256} 00:56:15.543104 --- ParallelTerminationStrategy: PID 21270 died... 00:56:15.595265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21270): Terminated: ok {rc=0} 00:56:15.604508 --- ParallelTerminationStrategy: PID 21273 died... 00:56:15.656589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21273): Terminated: ok {rc=0} 00:56:15.665963 --- ParallelTerminationStrategy: PID 21276 died... 00:56:15.718155 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21276): Terminated: ok {rc=0} 00:56:15.806434 bus /gobi_0: Setting Powered False 00:56:16.916803 bus /gobi_0: Setting Powered False 00:56:18.022767 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21274): Process ended prematurely: osmo-stp_10.42.42.5(pid=21274) [trial-2397↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21274)]